Parts for Ge GTWN7450H1WW: Tub & Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This clamp secures a flexible hose or line to a fitting, helping prevent leaks and keep connections stable during normal appliance operation. A small but essential fastening part for fluid or air lines. What it does:

• Holds a hose or line firmly to a barb, spud, or pipe to maintain a sealed connection
• Helps prevent leaks caused by loose or slipping hoses
• Keeps plumbing or venting lines routed and secure under vibration
• Common replacement when clamps become corroded, cracked, or lose tension

• Inspect mating hose and fitting for damage before installing a new clamp
• Tighten securely but avoid over-tightening, which can cut or deform the hose
• Use appropriate tools (screwdriver or nut driver) and follow appliance safety procedures
• Disconnect power and water supply when working on electrical or plumbing connections

The Impeller is an OEM internal component used in GE washing machine pump and drain assemblies. It circulates water through vanes that spin to transfer liquid within the system.

Symptoms of a bad impeller include: 

• Inability to properly pump or drain water from washer tub
• Pooling, flooding, or residual water left after cycles     
• Grating, squealing, or impaired motorized drain noises

Causes involve cracked, corroded, or out of round vanes reducing hydraulic efficacy over time. Impeller degradation risks flooding.

This GE OEM replacement impeller restores water circulation for efficient draining cycles. Compatible with some Hotpoint and Kenmore models as well, installation maintains optimal liquid transfer capabilities. 

Replacement screw for washers. Secures panels, brackets, and internal components. Needed when original screw is missing, stripped, or damaged.

The Tub Seal is an OEM part for GE washers. This part seals the washing machine's outer tub, preventing water leakage during the wash cycle.

Causes of a bad Tub Seal can include wear and tear over time, improper installation, or physical damage from foreign objects getting caught in the seal.  

Symptoms of a faulty Tub Seal include:

• Water leaking from the washer during operation
• Excessive moisture or dampness around the washer base
• Mildew or mold growth due to persistent leaks
• Loud sloshing or sloshing noises during the spin cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Door spring for front-load washers. Assists with smooth opening and closing of the washer door. Replace if cracked, fractured, or broken from wear.

This 10-24 x 1/2 machine screw secures panels and components in household appliances, restoring proper fit and reducing rattles or loose parts. Use it to replace missing or damaged fasteners for a secure assembly. What it does:

• Fastens panels, brackets, and internal components with a 10-24 thread size
• Restores secure mounting to eliminate rattling or misalignment
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Works where a short 1/2" machine screw is required for component clearance

• Disconnect power and unplug the appliance before servicing
• Use the correct screwdriver or nut driver to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Apply penetrating lubricant and proceed with care

Spin basket assembly for top-load washers. Holds clothes during wash and spin cycles. Replace if cracked, warped, or damaged from overloading or wear.

This spring clutch engages the motor shaft to transfer torque to the dryer drum, helping the drum start and maintain rotation. Replaces a worn clutch to restore normal drum engagement and reduce slipping or squealing. What it does

• Transfers motor torque to the dryer drum so the drum starts and keeps turning.
• Helps prevent the drum from spinning freely when the motor is not engaged.
• Commonly replaced when the drum slips, drags, makes squealing/grinding noises, or won't start smoothly.
• Works as part of the motor/clutch assembly that controls drum engagement during start-up.

• Disconnect power before inspecting or servicing the dryer.
• Replacing this part typically requires access behind or beneath the drum; follow the dryer's service manual for safe disassembly.
• Inspect the motor shaft, idler pulley, and drum glides/bearings while the dryer is open; replace any worn components to prevent premature clutch wear.

This replacement screw secures appliance components using a 5/16-24 Sinuloc style thread for a vibration-resistant hold. Use it to restore proper fastening and reduce rattling or loose panels caused by worn or missing hardware. What it does:

• Fastens panels, brackets, or assemblies with a 5/16-24 threaded connection
• Sinuloc design helps resist backing out from vibration or thermal cycling
• Restores secure mounting when original screw is stripped, lost, or damaged
• Helps eliminate rattles and movement of attached parts

• Verify correct thread size and engaging part before installation
• Start threads by hand to avoid cross-threading; tighten until secure
• Do not overtighten—use appropriate driver and moderate torque
• Disconnect power and follow appliance-specific safety procedures before servicing

A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:

• Anchors screws to hold trim, panels or internal components in place
• Restores secure attachment when the original mounting point is cracked or worn
• Helps eliminate rattling, loose panels, or alignment issues caused by a failed mounting surface
• Works with the appliance's existing screws and surrounding hardware to maintain structural fit

• Disconnect power to the appliance before attempting any repair
• Use the correct screws and a properly sized screwdriver to avoid further damage
• Inspect surrounding mounting points and replace any stripped screws or damaged clips as needed

Fixes sensor light errors and cycle selection problems. This mode shifter moves the transmission to restore correct agitation and spin functions in your washer.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Fix a washer that won't spin, stalls mid-cycle, or shows D3 error with this rotor position sensor module. DIY repair in about 30 minutes restores agitation.

Replaces cracked, damaged, or warped outer tub cover. Protects internal tub components and provides mounting surface for washer lid and hardware.

Washer making grinding noise or agitator loose? This hub nut secures the tub to the drive system. Moderate DIY repair requires spanner wrench tool.

Washer bouncing or grinding? The hub connects the tub to the transmission. Moderate DIY repair requires removing the agitator and aligning spindle teeth.

Fix washer temperature sensing issues with this thermistor O-ring seal. Restores accurate readings for proper cycle control. Quick DIY repair.

Washer filter cover protects the drain pump filter from debris. Replace if cracked, broken, or won't seal properly. Confirm fit with your model number.

Excessive vibration or banging during spin? This washer suspension rod and spring assembly supports the tub and absorbs movement to restore balance.

Mounting screw for dishwasher tub assembly. Secures internal components like spray arms and baskets. Replace if stripped, corroded, or missing.

Fix a washer making grinding noise during agitation or not spinning properly. This rotor motor assembly restores normal rotation and reduces noise.

A conical suspension spring that cushions and supports the washer tub to reduce vibration and help stabilize the drum during agitate and spin cycles. Replaces a worn or damaged spring to restore smoother operation. What it does:

• Helps absorb tub movement and shock during spin and agitation
• Reduces excessive vibration and rocking of the washer cabinet
• Can help stop loud banging or thumping noises caused by worn suspension
• Works with the washer's suspension system to keep the tub centered

• One conical suspension spring

• Disconnect power and water before servicing the washer
• Support the tub or cabinet while removing/installing the spring to avoid injury
• Inspect related suspension components and replace as needed
• Follow the manufacturer's diagram and instructions for proper routing and attachment

This hex nut secures threaded studs and fasteners on compatible appliances, providing a reliable metal-to-metal connection that keeps components in place during normal use. Use it to replace a worn or missing nut for a snug, safe fit. What it does:

• Fastens onto a 7/16-20 threaded stud to hold panels, brackets or components together
• Restores proper clamping force where a stripped, corroded or missing nut causes looseness
• Helps stop rattling, movement or misalignment tied to a loose fastener
• Simple hardware replacement that returns original fit and function

• One hex nut (7/16-20 thread, 2B)

• Turn off and unplug the appliance before performing any repair that exposes wiring or moving parts
• Use the correct wrench size and tighten until secure—do not overtighten to avoid damaging studs
• If removing rusted hardware, apply penetrating lubricant and take care not to break studs

Fix a washer that won't start or runs erratically with this motor wiring harness. Connects control board to drive motor for proper cycle operation.

Fix a washer that won't spin or agitate with a new stator. This motor component creates the magnetic field needed to drive the wash basket during cycles.

Replace your washer's damaged or leaking hose. This hose connects water supply lines or internal components. Order a new hose if yours is cracked or worn.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.