Parts for Ge WPGT9360E0PL: 03 - Tub, Suspension & Drive Components Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This suspension assembly stabilizes and supports the washer tub, absorbing movement during wash and spin. Replacing a worn suspension can reduce vibration and banging, helping restore smooth, balanced operation and quieter performance. What it does:

• Supports and centers the wash tub within the cabinet
• Dampens vibration, sway, and rocking during spin
• Helps prevent thumping, "walking," and off-balance interruptions
• Common symptoms of failure include excessive shaking, banging noises, frequent off-balance stops, or a tub that leans/sits low

• 1 suspension assembly

• Disconnect power and turn off water supply before servicing
• Wear gloves; components may be under spring tension—support the tub when removing the old assembly
• Access location varies by model; follow your model's service/diagram guidance
• After installation, level the washer and run a test spin to verify balance

This washer drain hose carries used water from the tub to your home drain. Replacing a cracked, clogged, or kinked hose helps restore proper draining and prevents leaks during the drain/spin portion of the cycle.

• Routes wastewater from the washer to the household standpipe or laundry sink
• Damage or blockage can cause leaks, slow or no draining, or water on the floor
• Replace if you see cracks, splits, bulges, or persistent leaking at the back of the washer
• A pinched or flattened hose can also lead to standing water after a cycle

• Unplug the washer and turn off water; place towels or a pan to catch residual water
• Note the routing; loosen clamps and remove the old hose from the washer outlet and drain connection
• Install the new hose and secure with clamps; avoid kinks or sharp bends
• Verify correct drain height/air gap to prevent siphoning, then run a drain/spin to check for leaks

This genuine OEM part is sold individually. It is a transmission assembly for washing machines. The transmission assembly is the gearbox in the washing machine's motor that allows the washing machine to work at different speeds and different intensities. If the washing machine is no longer spinning properly and has lost its normal level of washing power, it could mean that the transmission assembly needs to be replaced. Luckily replacing this part is not as difficult as it might seem at first glance.To replace the transmission assembly, start by turning off all power to the washing machine. Proceed to remove the upper control panel. To do this, pull forward on the bottom of the console and remove the two retaining clips as well as the harness connector to the lid switch. Using a flathead screwdriver remove the clips. After this, remove the entire cabinet from the back panel to gain access to the interior of the washer. Next, remove the 7/16 bolt from the agitator and pull it straight up to remove it from the shaft. Once completed, access the motor and pump and remove by releasing the screws and tabs that attach it. Remove the wire harness attached to the transmission. Remove the bolts that secure the motor mount to the transmission and proceed to pull the old transmission out of its place. Install the new transmission and reassemble the other parts.This replacement part is compatible with General Electric, RCA, and Hotpoint brand washers.

This motor assembly kit replaces the dryer's drive motor so the drum turns smoothly and reliably. Restores normal tumbling and helps stop motor noise or a drum that won't rotate. What it does:

• Powers the dryer drum so clothes tumble during operation
• Replaces worn or seized motors that cause the drum to stop turning
• Stops loud grinding, squealing, or humming noises from the motor area
• Helps eliminate intermittent starting or unresponsive drum rotation

• Disconnect power before beginning any repair to avoid shock or injury
• Basic installation involves removing the dryer front or rear panel, disconnecting wiring harnesses, and replacing the motor assembly
• Check belts, idler pulley, and drum support rollers while servicing; replace if worn

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This motor assembly kit replaces the dryer's drive motor so the drum turns smoothly and reliably. Restores normal tumbling and helps stop motor noise or a drum that won't rotate. What it does:

• Powers the dryer drum so clothes tumble during operation
• Replaces worn or seized motors that cause the drum to stop turning
• Stops loud grinding, squealing, or humming noises from the motor area
• Helps eliminate intermittent starting or unresponsive drum rotation

• Disconnect power before beginning any repair to avoid shock or injury
• Basic installation involves removing the dryer front or rear panel, disconnecting wiring harnesses, and replacing the motor assembly
• Check belts, idler pulley, and drum support rollers while servicing; replace if worn

This motor assembly with integrated clutch replaces the dryer's drive motor to restore drum rotation and normal tumbling. It's the direct-fit drive unit used to move the dryer drum and enable reliable drying performance. What it does:

• Turns the dryer drum so clothes tumble and dry evenly.
• Clutch helps control drum start/stop and prevents backward spinning.
• Commonly replaces a worn motor or failed clutch causing no tumbling.
• Stops grinding or squealing noises if the clutch or motor bearings are failing.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Wear gloves and eye protection; follow the dryer service manual for disassembly steps.
• Reinstall drum belt and alignment per factory instructions; mounting hardware is secure.
• After installation, test with a short cycle to ensure proper drum rotation and noise-free operation.

This is a replacement washer used with appliance fasteners to secure and space components for stable operation. Installing a correct washer helps maintain proper fit and reduces wear at connection points. What it does:

• Provides a stable bearing surface between a fastener and the mounted part
• Helps maintain correct gap/spacing for aligned components
• Reduces wear and prevents metal-on-metal contact at the joint
• Can stop loosening that causes vibration or rattling near fastened panels

• Disconnect power and water before accessing internal components.
• Use the correct matching fastener and size; do not substitute an incorrect diameter or thickness.
• Hand-start fasteners to avoid cross-threading, then torque to manufacturer specs; avoid overtightening.
• If multiple washers or fasteners show wear, replace all affected hardware for best results.

This thermistor assembly senses appliance temperature and sends readings to the control board so the unit can regulate cooling. Replaces a failed or intermittent sensor to restore accurate temperature monitoring. What it does:

• Measures internal temperature and provides variable resistance feedback to the control board.
• Helps the control system maintain desired cooling by reporting temperature changes.
• A faulty thermistor can cause temperature fluctuations, poor cooling, or incorrect temperature readouts.
• Can clear temperature-related error codes when replaced as directed by diagnostics.

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle the sensor and wiring gently; avoid pulling on wires or connectors.
• Install in the original sensor location and route wiring as OEM to prevent interference or damage.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.