Parts for Whirlpool WETLV27FW0: 02 - Washer / Dryer Control Panel Parts

The Washer Timer is an OEM part for Whirlpool washing machines. It controls the various cycles and timing functions of the washer, ensuring that each cycle runs for the correct duration.

Causes of a bad washer timer can include wear and tear from regular use, electrical faults, or mechanical issues within the timer mechanism.  

Symptoms of a bad washer timer include:

• The washer not advancing through cycles
• Incorrect cycle times or skipped cycles
• The washer stopping mid-cycle
• Inconsistent washing performance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This cycle selector switch lets the user choose wash or dry cycles by turning the control dial. It restores reliable cycle selection and responsive dial behavior so the machine starts the intended program. What it does:

• Selects the appliance cycle position when the control knob is turned
• Sends the chosen cycle signal to the timer/control assembly
• Commonly replaced when the dial slips, feels loose, or won't advance between cycle positions
• Helps resolve issues where the machine won't start the selected cycle or changes settings unexpectedly

• Disconnect power (and water if a washer) before servicing
• Access typically requires removing the control console or panel; follow your model service manual
• Avoid bending terminals; match connector orientation during reassembly

This replacement dial restores a worn, cracked, or missing selector on compatible Whirlpool controls so you can easily choose cycles and settings. It provides a secure grip and clear position feedback for reliable operation. What it does:

• Replaces a broken or stripped selector dial so the control shaft can be turned smoothly
• Restores clear visual indicator for cycle, temperature, or function positions
• Helps resolve symptoms like a loose, cracked, or missing knob that won't turn or stays in one position
• Fits directly onto the control shaft to re-enable normal user operation

• Disconnect power (unplug or switch off breaker) before repairing electrical appliances
• Pull off the old dial straight from the control shaft; align splines and push the new dial on until fully seated
• If the dial is tight or stuck, use gentle rocking motion — avoid forcing to prevent shaft damage

A 3-position rotary switch that lets the user select between functions or cycles on compatible appliances. Replaces a worn or failed selector control to restore reliable function selection and knob response. What it does:

• Selects between three switch positions to route power/signals for different functions.
• Replaces a faulty selector that causes unresponsive or intermittent knob operation.
• Helps stop incorrect or no-function behavior when the control won't stay in a chosen position.
• Works as the user-facing control for changing modes or settings on the appliance.

• Disconnect power to the appliance before beginning any repairs.
• Take a photo of wiring and knob orientation before removal to ensure correct reassembly.
• Handle terminals gently and reconnect wires to the matching terminals; secure fasteners.
• Test the appliance function after reassembly to confirm correct operation.

This temperature switch (selector) controls oven/burner temperature settings so heat responds to your control inputs. Replaces a failed or worn selector to restore accurate temperature selection and reliable cooking performance. What it does:

• Routes the control knob position to the oven's temperature control circuitry
• Changes electrical contacts as you select different temperature settings
• Common symptom: oven or burner won't reach or hold selected temperature
• Common symptom: temperature knob feels loose, clicks, or doesn't change heat

• Disconnect power (and gas if applicable) before starting work
• Access typically requires removing the control panel or console; keep fasteners and trim organized
• Label or photograph wire locations before disconnecting to ensure correct reconnection

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Push To Start Switch is an OEM part for Whirlpool dryers. It is the interface between the user and the dryer, initiating the drying cycle when pressed. This switch is essential for the safe and efficient operation of the dryer, ensuring that it starts only when the button is deliberately pressed, thereby preventing accidental start-ups.

Causes of a bad Push To Start Switch can include electrical failures within the switch mechanism, wear and tear from repeated use, or damage from spills or moisture exposure.

Symptoms of a bad Push To Start Switch include:

• The dryer not starting when the button is pressed
• The need to press the button multiple times to start the dryer
• The dryer starting without the button being pressed 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a round control knob that replaces a worn or broken appliance control interface, restoring a secure grip and accurate setting selection. It fits on splined control shafts used for temperature or function selection. What it does:

• Replaces a cracked, faded, or loose control knob so settings turn smoothly and stay in place
• Provides a clear tactile stop for selecting temperature, timer, or function positions
• Restores safe user control when the original knob slips or will not engage the shaft
• Matches common splined shaft connections for direct push-on installation

• Unplug the appliance or switch off power at the breaker before servicing
• Align the knob with the control shaft splines and push straight on until fully seated
• Do not force the knob past resistance; if it does not fit, verify shaft type and part number

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

• Produces audible tones for cycle end, timers and other appliance notifications
• Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
• Helps you hear and identify completed cycles and timed alerts
• Small, mountable unit that fits behind the control panel and connects to the control board

• One adjustable buzzer kit

• Disconnect power before servicing to avoid shock risk
• Access may require removing the control panel; keep fasteners organized for reassembly
• Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
• Test buzzer function with power restored before fully reassembling

The Timer is an OEM part for Whirlpool dryers, designed to control the duration of various drying cycles. This part ensures your dryer operates efficiently, cycling through its programmed times for drying, cooling, and tumbling. 

Common causes of a malfunctioning dryer timer include corrosion or wear of electrical contacts, mechanical failure from stuck gears, and electrical shorts impacting circuitry.

Symptoms of a failing Timer include:

• The dryer not starting or stopping at the correct time.
• The dryer skipping certain parts of a cycle or not advancing through cycles at all.
• Inconsistent drying times, leading to clothes being either too damp or overly dry.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This hinge bracket secures a refrigerator door hinge to the cabinet, restoring proper door alignment and support so the door seals and closes reliably. Designed to replace a worn, bent, or broken hinge mounting bracket. What it does:

• Provides a stable mounting point for the door hinge assembly to prevent sagging or drooping
• Restores correct door alignment to improve sealing and reduce cold air loss
• Stops excess movement or rattling at the hinge area
• Helps eliminate door-binding or uneven gaps that keep the door from closing fully

• Unplug the appliance and remove food/items from the door before starting
• Support the door while removing/installing the bracket to avoid damage or injury
• Reuse or replace fasteners as required; tighten securely but avoid over-torquing
• After installation, check door alignment and gasket seal; make minor adjustments as needed

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.