Drawer, Shelf, Pan

The Front Shelf Trim is an OEM part for Frigidaire refrigerators. This part enhances the appearance and functionality of refrigerator shelves by providing a finished look and preventing items from sliding off. The trim snaps onto the front edge of refrigerator shelves, adding stability and a sleek, polished appearance to the shelving unit.

Over time, the front shelf trim can become cracked, discolored, or even break due to frequent cleaning, exposure to cold temperatures, or accidental damage. This can lead to a less secure shelf edge, which might not effectively prevent items from sliding off as intended.

Symptoms of a bad Front Shelf Trim include:

• Visible cracks or breaks in the trim
• Difficulty in fitting or staying attached to the shelf
• Aesthetic issues such as discoloration or warping
• Reduced effectiveness in preventing items from sliding off the shelf

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as a lid or shelf above the crisper drawers, where fruits and vegetables are stored. This cover helps maintain humidity levels in the crisper compartments, preserving the freshness and extending the life of perishable items. It also provides additional shelving space for other items, enhancing the refrigerator's storage efficiency. The cover measures approximately 19-5/8" x 16-3/8". 

Symptoms of a bad Crisper Pan Cover include:

• Cracks or damage that can impair structural integrity or aesthetics,
• Warping that affects fit and function within the refrigerator,
• Difficulty in sliding or removing the cover, which could indicate size changes due to temperature fluctuations or damage.

Causes of crisper pan cover failure often include physical impact from storing or removing items, environmental stress from cold temperatures, or material fatigue over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The GE End Cap is an OEM replacement part designed for compatibility with various GE refrigerator models. This end cap supports your door shelf bars allowing your items to stay firmly in place. It is white in color and 2.5 inches high and 3 inches deep. This end cap is used for both left and right sides for both freezer and fridge doors.

Symptoms that may indicate the need to replace the end cap include:

• Cracks, chips, or visible damage to the existing end cap
• The end cap becoming loose or detached from the refrigerator cabinet

Causes of needing a new end cap can include physical impact or mishandling during moving or cleaning, exposure to extreme temperatures, or general wear and tear over an extended period of use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

The Door Bin is an OEM part for Frigidaire refrigerators. This part attaches to the inside of the refrigerator door, offering additional storage space for bottles, jars, and other condiments. Designed for ease of installation and removal, the door bin enhances the refrigerator's storage capacity and organization, allowing for quick access to frequently used items. 

Over time, door bins can become cracked, warped, or broken due to overloading, accidental impacts, or general aging. This can compromise their ability to securely hold items, leading to potential spills or damage to stored goods.

Symptoms of a bad Door Bin include:

• Visible cracks or breaks in the bin
• The bin sagging or not attaching securely to the refrigerator door
• Difficulty in sliding the bin in or out, or it not fitting properly
• Reduced effectiveness in holding items securely

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Vegetable Drawer Cover Frame is an OEM part for GE refrigerators. It serves as a supportive structure and shelf for the crisper drawers, helping to maintain organization and accessibility within the refrigerator. This frame also helps to seal the vegetable drawer area, preserving the humidity and temperature that keep your fruits and vegetables fresh longer. This is just the frame and does not include the glass.

Symptoms of a bad Vegetable Drawer Cover Frame include:

• Cracking or breaking of the frame, which may cause the drawers to sag or not close properly.
• Difficulty in sliding the drawers in and out due to misalignment caused by a damaged frame.
• Visible warping or deformation of the frame, affecting its functionality and appearance.

Causes of a bad vegetable drawer cover frame can include heavy loading that exceeds the frame's weight capacity, impacts from moving the drawers in and out, or environmental factors such as moisture that can weaken the plastic over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Glass Crisper Cover is an OEM part for Whirlpool refrigerators. It serves as the cover for the crisper drawers, providing a sturdy surface for storing items while helping to maintain the humidity levels inside the drawers to keep fruits and vegetables fresh. Measuring approximately 15 1/4" by 18", it ensures the drawer slides in and out smoothly.

Causes of a bad glass crisper cover can include accidental impacts that cause cracks or shattering, stress from heavy loads placed on top of the cover, or general wear and tear over time. Exposure to extreme temperatures or mishandling during cleaning can also lead to damage.

Symptoms of a bad glass crisper cover include:

• Cracks or breaks in the frame
• The cover not fitting securely over the crisper drawers
• Difficulty sliding the crisper drawers in and out
• Food items falling through due to gaps or damage

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Bin is an OEM part for Frigidaire refrigerators. It is a storage compartment designed to fit securely onto the interior of the refrigerator door, providing convenient and easily accessible storage space for items like beverages, condiments, or other small food items.

Causes of a bad door bin can include cracks or damage due to impact or mishandling, warping or discoloration from exposure to heat or moisture, or wear and tear on the hinges or mounting mechanisms that attach the bin to the door.

Symptoms of a faulty door bin may include:

• Cracks, chips, or other visible damage
• The bin not fitting properly or securely onto the door
• Leaks or spills due to a poorly sealed or damaged bin
• Difficulty opening or closing the bin
• Obstructed access to the bin due to misalignment or warping

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This is the 2 liter bin. For the gallon door bin use part number 240383801.

The End Cap is an OEM part for GE refrigerators. It is designed to fit on the ends of refrigerator shelf supports, providing a finished look and helping to secure the shelf in place. This small but important component prevents the edges of the shelves from becoming damaged or causing injury by covering sharp ends and supporting the overall structure of the shelving system.

Symptoms of a bad End Cap include:

• Shelves becoming loose or falling down,
• Visible cracks or breaks in the end cap,
• Difficulty in securing the shelf properly.

Causes of end cap failure typically include physical stress from overloading shelves, accidental impacts during loading or unloading items, or material degradation over time due to the environmental conditions within the fridge.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Rack is an OEM part for Frigidaire refrigerators. This rack provides additional storage space for bottles, jars, and other condiments. It's an essential component for maximizing the storage capacity and organization of your refrigerator, making the most out of the available space. 

Over time, door racks can experience wear or become damaged due to overloading, accidental impacts, or the natural aging process. This can lead to issues such as the rack becoming loose, cracking, or not being able to securely hold items.

Symptoms of a bad Door Rack include:

• Cracks or breaks in the rack, compromising its structural integrity
• The rack sagging or not attaching securely to the refrigerator door
• Difficulty in sliding the rack in or out, or it not fitting properly
• Reduced effectiveness in holding items securely

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Rack Support is an OEM part for Frigidaire refrigerators. It is designed to support the door rack or bin, providing a secure mounting point that helps hold items in place within the refrigerator door. This support piece ensures that the door racks remain stable, allowing you to store and organize items like bottles, jars, and condiments efficiently.

Causes of a bad door rack support can include regular wear and tear from frequent use, overloading the door racks with heavy items, or accidental damage from impacts or mishandling. Over time, these factors can cause the support to crack, break, or lose its ability to hold the door rack securely.

Symptoms of a bad door rack support include:

• Door racks sagging or falling out of place
• Difficulty in fitting or securing the door racks
• Visible cracks, breaks, or damage to the support

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Slide Assembly RH is an OEM part for GE refrigerators. This slide assembly is designed to support and guide the refrigerator's drawers, ensuring smooth opening and closing. The slide measures approximately 10 inches x 1 3/8 inch x 1 5/16 inch. This is the right-hand side. For the left-hand side order WR72X241. For the slide bearing order WR1X2048.

Over time, the slide assembly can become worn out or damaged. Causes of a bad slide assembly can include frequent use, physical damage from overloading the drawers, or wear and tear on the sliding mechanism.

Symptoms of a bad Slide Assembly RH include:

• Difficulty opening or closing the refrigerator drawers
• Drawers not sliding smoothly or getting stuck
• Unusual noises when moving the drawers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Rack Support is an OEM replacement part for Frigidaire refrigerators. It serves as the mounting bracket or structure that holds and secures the door racks or bins in place on the inside of the refrigerator door.

Symptoms of a need to replace the door rack support:

• Loose or wobbly door racks or bins
• Racks or bins falling off the door when opened
• Visible cracks, breaks, or damage to the support structure

Causes of a faulty door rack support can include general wear and tear over time, physical impact or mishandling, or manufacturing defects in the material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. It serves as a critical component in the refrigerator's door, providing support for the shelves that hold various items like bottles, jars, and other containers. This support measures approximately 2 1/2" tall x 1 1/2" deep. 

Causes of a bad door shelf support can include cracking due to overloading, material fatigue from regular use, or accidental damage. When the supports weaken or break, it affects the structural integrity of the door storage, leading to potential spills or damaged goods.

Symptoms of a bad Door Shelf Support include:

• Shelves leaning or sagging noticeably
• Difficulty in fitting the shelf into the door
• Cracks visible in the support
• Shelves falling off or failing to hold items securely

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Meat Pan Hanger is an OEM part for Frigidaire refrigerators. It provides support and organization for the meat pan or deli drawer in your refrigerator. The meat pan hanger is built to securely hold the meat pan in place, preventing it from sliding or falling out. It ensures that your meat or deli items are properly stored and easily accessible.

A bad meat pan hanger can occur due to wear and tear over time or accidental damage. If the hanger becomes loose, cracked, or broken, it can compromise the stability of the meat pan, making it difficult to use and potentially causing damage to the drawer or its contents.

Symptoms of a bad meat pan hanger include:

• Loose or wobbly meat pan/deli drawer.
• Difficulty in opening or closing the drawer.
• Noticeable damage or deterioration of the hanger.
• Inability to securely attach the meat pan to the hanger.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This is a left hand track only. Screws not included. For the mounting screws order 215005101.

The Door Shelf Bar is an OEM part for GE refrigerators. It is designed to hold items securely on the door shelves, providing additional storage space and organization within the refrigerator. The shelf bar ensures that items such as bottles, jars, and condiments stay in place when the door is opened and closed. The shelf measures approximately 21 inches long by 2 inches wide.

Causes of a bad door shelf bar can include wear and tear from regular use, accidental damage from heavy items, or plastic fatigue over time. When the shelf bar is damaged, it can no longer hold items securely, leading to spills and disorganization.

Symptoms of a bad door shelf bar include:

• Cracks or breaks in the bar
• Items falling from the door shelves
• Difficulty keeping the bar in place
• Loose or wobbly shelf bar

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Gallon Door Bin is an OEM replacement part for Frigidaire refrigerators. It is a spacious storage compartment designed to be mounted on the refrigerator door, providing convenient access to frequently used items. This bin measures approximately 13" wide and 7-1/4" deep.

Causes of a faulty gallon door bin can include physical damage, such as cracks or breaks, or issues with the mounting mechanism that secures it to the door.

Symptoms of a need to replace the gallon door bin:

• Cracks, chips, or other visible damage to the bin
• Difficulty in opening or closing the refrigerator door due to the bin's positioning
• Loose or unstable mounting, causing the bin to detach or fall off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.