White Outdoor Snow Removal Equipment Parts

This part is a replacement friction wheel assembly. It is intended to replace a defective or broken friction wheel assembly in snow blowers.The friction wheel works with the friction disc to turn the drive wheel axle. This part is essential to proper equipment functionality but may be damaged with regular equipment usage. Before beginning this repair job, disconnect spark plug. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before beginning. This friction wheel assembly is a genuine MTD OEM part made of durable materials and is sold individually. It is suitable for use with snow blower models that have been manufactured by MTD, Craftsman, Troy-Bilt, and some other brands.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

This replacement part is a bolt. This is a genuine replacement part made by MTD. This part is small but important to the overall workings of the machine. Bolts work with other parts such as screws and nuts to ensure that different parts are held in place and are secure during use. A new bolt might be needed if the current one has become loose, is missing, or has been damaged. This can include being dented, bent, or lodged in place. Be sure to replace it as soon as possible if this is the case. This should be a fairly simple repair and only require common household tools such as a screwdriver and pliers. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This drive shaft is a genuine MTD part, sold individually. This drive shaft can be used as a replacement part in a snowblower. The purpose of the drive shaft in a snowblower is to allow the operator to steer and regulate the motion of the appliance while in use.The drive shaft in a snowblower might have to be replaced if the drive shaft exhibits clear signs of damage or malfunctioning during the typical lifespan of the appliance. If the area in and around the drive shaft is excessively vibrating, generating strange noises, or is not serving its typical function at any point, the drive shaft should be removed and replaced by this genuine OEM replacement part in order to guarantee safe continued use of the snowblower. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This drive shaft is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard-Man.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a snowblower. The purpose of the clevis pin in a snowblower is to serve as a u-shaped fastening component used in the place of a bolt and rivet to secure various parts within the internal mechanisms of the appliance.The clevis pin in a lawnmower might have to be replaced if the clevis pin can no longer hold one or more components in place within the lawnmower. The clevis pin could suffer damage from general wear and tear with long-term use, due to collision with a hard object, or from exposure to the elements. If any damage occurs that reduces the functionality of the clevis pin, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This clevis pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard-Man.

This replacement part is a hex nut. This is a genuine replacement part made by MTD. Hex nuts are small but important to the overall workings of many appliances. These parts work with other small pieces such as screws and washers to ensure that all parts of the machine are secure during use.A new hex nut might be needed if the current one is missing or damaged in any way. This can be caused by normal wear and tear with years of extended use. Hex nuts can experience large amounts of friction over time and may become stripped down. Be sure to replace the part as it might not be as effective as in prior uses. Refer to the user manual for specific directions on how to replace this part.This hex nut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This ignition switch cap is a genuine MTD part, sold individually. This ignition switch cap can be used as a replacement part in lawn mowers and snowblowers. The purpose of the ignition switch cap for one of these small engine outdoor appliances is to protect and cover the ignition switch.The ignition switch cap can be damaged to the point of exposing the ignition switch. If this occurs, it should be removed and replaced by this genuine OEM replacement part with the intention of protecting the ignition switch.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This ignition switch cap is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Yard Machines, Huskee, Montgomery Wards, and Yard-Man.

This plastic slide shoe is a genuine MTD part, sold individually. This plastic slide shoe can be used as a replacement part in a snowblower. The purpose of the plastic slide shoe in a snowblower is to allow a small bit of snow to hold over below the snowblower so that the appliance does not come into direct contact with the concrete surface, which could damage the appliance.The plastic slide shoe in a snowblower might have to be replaced at some point within the typical lifespan of the appliance if the plastic slide shoe can no longer protect the snowblower from damage while in use. If the plastic slide shoe is lost, misplaced, or compromised to the point of reduced or negated functionality, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This plastic slide shoe is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Troy-Bilt.