White Outdoor Snow Removal Equipment Parts

This cam rod, also called a rod cam or a cam-rod, is a genuine MTD part. It is manufactured as a replacement part for snow blowers and snow throwers from a number of makers.This rod is long and thin, and although the original is made from durable material, it can become warped or damaged over time. It is an important component in the push function of the machine and must be replaced if damaged for safety purposes.This cam rod is a genuine OEM part which is sourced directly from the manufacturer. It is sold individually. It is compatible with snow blowers and snow throwers made by ACE, Craftsman, Huskee, Husky, Lawn Chief, Montgomery Ward, MTD, Power Pro, Ranch King, Ryobi, Select Series, White Outdoor, Yard Machines, and Yard-Man. Many of the compatible machines were made in the 1990s.

This axle support tube is a genuine MTD part, sold individually. This axle support tube can be used as a replacement part in a snowblower. The purpose of the axle support tube in a snowblower is to affix to the axle sprockets in order to bolster and secure the axles inside the gearbox, the function of which is to facilitate the smooth rotation of the blades during the typical operation of the snowblower.The axle support tube in a snowblower might need to be replaced if the tube is compromised and cannot facilitate the stable placement of the axles. If the axle support tube is damaged in the form of puncturing, scraping, denting, cracking, warping, or eroding to the point of reduced functionality or no efficacy, the axle support tube should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This axle support tube is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Man.

This chute control assembly is a genuine MTD part, sold individually. This rubber cap can be used as a replacement part in a snowblower. The purpose of the chute control assembly in a snowblower is to regulate the direction toward which snow is dispelled from the appliance.If the chute control assembly is subject to damage in the form of puncturing, denting, cracking, warping, or eroding, the component should be removed and replaced by this genuine OEM replacement part before using the snowblower again. It is a simple repair process that will require only basic tools to conduct; the repair should be performed in accordance with the proper instructions sourced from a relevant manual or handbook. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This rubber cap is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Huskee.

This drive pulley is a genuine MTD part, sold individually. This drive pulley can be used as a replacement part in a snowblower or an edger. This part is used in conjunction with the drive belt to move the appliance.The drive pulley in a snowblower or an edger might have to be ordered as a complete replacement part in a drive pulley that can no longer generate rotation in the wheels of the appliance. This could occur if the drive pulley has suffered damage from general wear and tear with long-term use or as the result of a collision with a hard object such as a rock or a curb.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This drive pulley is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

This part is a replacement handle bracket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace broken or defective handle brackets in a variety of snow blower and snow thrower models. This handle bracket secures the handle of the snow blower or snow thrower so the equipment can be properly and safely used. If the bracket is detached, bent, dented, or broken, the handle may become detached. Thus, the handle bracket should be replaced. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this handle bracket, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this handle bracket is suitable for use on several different models of snow blowers and snow throwers manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is an MTD drive idle bracket. The drive idle bracket holds the drive idle pulley in place. This pulley is a part of the drive belt system and works to engage the clutch/brake. When the clutch/brake system begins to malfunction, this could signify a drive idle pulley problem. The drive idle bracket can wear out over time leading to problems. If the idle bracket is not fastening the pulley properly, the pulley may move, causing the belt to jump off the pulley. When this happens, the clutch/brake system is not able to be engaged. For proper clutch engagement and braking, the bracket and idle pulley should be in satisfactory condition. The deck and wheels may need to be removed to install this component. Wear gloves for safety whenever working anywhere near the blade area of the lawn mower. Once the drive belt system can be accessed, the belt will need to be removed. It may be necessary to purchase a new belt to go along with this installation.This piece is sold individually as a genuine OEM part sourced directly from the manufacturer. This part is compatible with MTD and Cub Cadet machines.

This shave plate is a genuine MTD part, sold individually. This shave plate can be used as a replacement part in a snowblower. The purpose of the shave plate in a snowblower is to scrape up densely packed snow that might linger below the base of the appliance and get in the way of the operator while the snowblower is in use.The shave plate in a snowblower might need to be replaced if it can no longer efficiently and effectively serve its typical function. The shave plate might be dented, cracked, chipped, punctured, warped, or eroded and if this form of damage occurs, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM from the manufacturer. It is sold individually. This shave plate is compatible with the following outdoor appliance brands: MTD.

This replacement clutch drive is a part of the drive system and wheel assembly on snowblowers. The clutch drive engages the transmission when the engine is turned on so that the snowblower auger will rotate as the machine is pushed forward. This part is subject to repetitive motion and constant use so it sometimes just wears down with regular use. If something gets into the snowblower auger or other areas, that could damage the clutch drive, as well. In the event there is damage or the clutch drive no longer works as it should, it will need to be replaced with an OEM part like this one. This is a genuine replacement part made to OEM standards. It can be used in compatible machines from MTD, Craftsman, Troy-Bilt, and Yard-Man. The clutch drive is sold individually. It will not contain any additional parts or components. Disconnect the power supply or disengage the engine before working on outdoor power equipment. Allow the unit to cool and be cautious working around the auger as the blades can be quite sharp.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.

This key is a genuine MTD part, sold individually. A key can be used as a replacement part for outdoor appliances including lawn mowers, snowblowers, tillers, and edgers. This genuine OEM part is made out of high quality, durable metal material meant to withstand exposure to the elements and general wear and tear over long-term usage.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This key is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.

This is a genuine OEM gear housing assembly sourced directly from the manufacturer; it is used on snow blowers to protect the components in the gearbox. This solid metal housing prevents the components from being damaged by the elements, debris, and foreign objects. The gear housing assembly also keeps the internal components dry and lubricated by sealing lubricant in and keeping water out.Although the gear housing assembly is a heavy-duty metal part, it is possible that time, heavy use, and the elements can cause damage. If this is found during annual routine inspections, the gearbox housing should be removed and replaced. Before making this repair, remove the fuel from the snowblower and place the machine on a flat surface. Wear protective gloves and goggles. Keep a diagram of the machine nearby for reference as the machine is disassembled to access the gear housing assembly. After removing and replacing the gear housing assembly, reassemble the snowblower, and refill the gas. This gear housing assembly is made of heavy-duty metal and sold as an individual unit. It is compatible with snow blowers and snow throwers manufactured by Craftsman.

This gear housing assembly is a genuine replacement part that is designed to protect the gears and provide mechanical support so that the gears can work properly. This housing holds the gears and protects them from damage and other risks, as well as providing lubrication for the parts. Over time, the housing can crack or become damaged and it will need to be replaced to keep the gears protected and working properly. This genuine OEM part is manufactured to exact standards by MTD and designed for use in select models of snowblowers to protect the gears during use. It is compatible with models from Yard Man, Troy-Bilt, and Cub Cadet, as well. This part is sold individually and does not include any additional parts or hardware. Be sure to disconnect the power to install any parts, including this gear housing assembly. Wear gloves for hand protection and allow the unit to cool completely before starting work. Do not use a snowblower with a faulty gear housing assembly as it can cause serious damage.

This replacement part is a housing assembly. It ensures that multiple parts are connected to allow for the engine to run smoothly and effectively during use. A new housing assembly might be needed if the current one is no longer able to stay attached to the machine. This can be due to normal wear and tear over time.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.