Parts for Maytag MEDB850WR0: 02 - Cabinet Parts

Mounts the washer top panel to the cabinet frame. Replace if screw is stripped, rusted, missing, or damaged during cabinet disassembly and repair work.

This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.

Dryer won't heat or stops working? A burnt or melted terminal block disrupts power flow. DIY repair in under an hour with video guidance included.

Fixes dryer that won't start when button is pressed or runs without door closed. Restores reliable circuit control for start, stop, and safety functions.

Dryer belt protector wire connects belt to thermal protector. Replace if broken, frayed, or causing belt slippage. Verify fit with your model number.

Dryer cabinet housing that encloses internal components. Replace if the outer cabinet is cracked, dented, rusted, or structurally damaged beyond repair.

Adjustable leveling foot that screws into the bottom of your dryer cabinet. Replace missing, broken, or cracked feet to stabilize and level your unit.

Adjustable leveling foot that screws into the bottom of your dryer cabinet. Replace missing, broken, or cracked feet to stabilize and level your unit.

If your dryer motor has come loose or makes grinding noises, this motor clamp secures the drive motor. Simple DIY repair with basic tools in under an hour.

Idler arm spring maintains tension in your dryer's belt system. Replace if spring is stretched, broken, or unable to keep proper tension on the drum belt.

Secures the idler pulley to maintain proper drum belt tension in your dryer. Replace if worn, loose, or causing squealing noises. Confirm fit with your model.

Replacement mounting nut for dryer assembly. Secures components and panels in place. Order a new nut if yours is stripped, corroded, or missing.

Idler pulley assembly maintains tension on the dryer belt. Replace if the pulley wheel is worn, seized, or makes squealing noise during operation.

Fix a dryer that won't heat or has burning smell at the power connection. This terminal wire kit replaces burned wires and connectors. Easy DIY repair.

Secures the front panel to the dryer cabinet. Replace if cracked, broken, or damaged during disassembly. Installs at the panel-to-cabinet seam.

Replacement door hinge for your dryer. Mounts between the door and cabinet to allow smooth opening and closing. Needed when hinge is cracked or broken.

Replaces broken or bent dryer door hinge pin assembly. Secures door pivot, restores proper alignment, and ensures smooth opening and closing.

Mounting plate for dryers. Secures and supports internal components. Replace if cracked, bent, or damaged to restore proper structural integrity.

Dryer door won't stay closed or latch properly? This door catch securely holds the door shut during operation. Easy DIY repair in under 30 minutes.

Dryer door seal prevents air leaks and retains heat inside the drum. Replace when loose, torn, or causing heat loss. Includes adhesive. Verify fit.

Dryer belt slipping off motor pulley or making squealing noises? The belt restrainer keeps the drive belt aligned. Moderate DIY repair with video guide.

Dryer won't start or makes squealing noise? A faulty motor assembly stops operation or causes loud grinding sounds. Moderate DIY repair restores function.

Motor drive pulley for dryer drum belt. Installs on motor shaft to transfer power and spin the drum. Replace if worn, cracked, or causing belt slippage.

Connects the dryer drum to the motor for rotation. Replace if drum won't turn, makes squealing noises, or belt shows wear. Verify fit with your model.

Fix belt slipping, squealing, or drum not turning with a new dryer motor pulley. Restores proper belt alignment and eliminates abnormal noise.

Dryer won't power on or has loose power cord connection? This terminal block screw kit secures electrical connections. Easy DIY fix in 15 minutes.

Mounting screw for dryers. Secures panels, components, and internal parts. Replace if stripped, missing, or damaged during appliance maintenance.

If assemblies shift or rattle during dryer operation, this snap-down locator clip secures components in place. Simple snap-in installation restores alignment.

Screw secures appliance panels and access covers. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattles or gaps.

Dryer door won't stay closed? This door strike engages with the catch to secure the door. Simple DIY fix in minutes with basic tools and video guide.

Control panel for dryers. Mounts on the top front of the unit and houses buttons and displays. Replace if cracked, broken, or cosmetically damaged.

Flat head screw secures panels, brackets, or trim for a flush fit on your dishwasher. Replace worn or missing screws to prevent rattling and shifting.

Replace your dryer's damaged or broken door assembly. This complete door unit installs on the front panel to restore proper access and appearance.

Complete dryer door assembly that mounts to the front panel. Replace when your existing door is cracked, damaged, or no longer seals properly.

If your dryer top panel rattles or won't stay secure, this panel lock restores a tight fit to the front frame. Quick DIY fix eliminates gaps and vibration.

Seals the gap between the dryer bulkhead and front panel around the door opening. Replace if torn, deformed, or causing air leaks. Confirm fit by model.

Replace your dryer's cracked, broken, or missing cover panel. This structural part restores the exterior appearance and protects internal components.

Supports and pivots the hinged dryer top panel for service access. Replace if cracked, broken, or causing wobble, scraping, or alignment gaps.

Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.

Secures washer door handles to the outer panel. Replace if stripped, missing, or damaged to restore a tight handle fit and prevent loosening.