Parts for Maytag IGD7200TW10: 03 - Bulkhead Parts

Color: gray. Measures about 13 inches wide by 11-1/2 inches high.

A flat metal washer used with fasteners to distribute load and prevent damage to mating surfaces for secure appliance assemblies. Replaces worn or missing hardware to reduce vibration and keep components aligned. What it does

• Sits under a nut or bolt head to spread clamping force and protect parts
• Helps maintain proper tension on mounting hardware and assemblies
• Reduces loosening from vibration or movement
• Can alleviate rattling or misalignment caused by missing or damaged washers

• Disconnect power and water to the appliance and follow all safety precautions before servicing
• Use appropriate sized wrench or socket to remove/install associated fastener; avoid overtightening
• Inspect mating fastener and surrounding parts; replace damaged hardware as needed

This dryer drum support roller holds the drum on its axle and lets it rotate smoothly. Replacing a worn or noisy roller restores quiet, even tumbling and helps prevent belt strain and added wear on related parts.

• Supports the dryer drum and allows low-friction rotation on the shaft
• Helps keep the drum aligned and stable during cycles
• Wear can cause squeaking, thumping, rumbling, or grinding noises
• Flat spots, cracks, or excessive wobble indicate replacement

• Disconnect power; turn off gas supply for gas models
• Access the roller by removing the front or rear panel/bulkhead per model; relieve belt tension and support the drum
• Install the new roller on the existing shaft, reusing model-specific washers/clips as required
• Inspect remaining rollers, idler pulley, and belt; replace any worn parts together to maintain smooth, quiet operation

Wire harness not included. For harness use part number 35001164.

The Dryer Blower Wheel Assembly is an essential component for maintaining the efficiency of your dryer. This genuine OEM part is designed specifically for Samsung dryers, ensuring a perfect fit and optimal performance. The blower wheel facilitates proper airflow, which is crucial for effective drying cycles and helps prevent overheating. Crafted from durable materials, this assembly is built to last, reducing the need for frequent replacements and providing long-term reliability. By installing the Dryer Blower Wheel Assembly, you can enhance your dryer's energy efficiency, leading to faster drying times and lower energy costs. Additionally, this part helps minimize noise and vibration, contributing to a quieter and more stable appliance operation. Easy to install, it allows you to quickly restore your dryerGÇÖs functionality without hassle. Whether you are repairing a faulty blower or upgrading your dryer, this genuine OEM part offers the quality and compatibility you need to keep your Samsung dryer running smoothly and effectively.

This thermostat is a temperature-sensitive switch that opens and closes the heating circuit to control heat. Replacing a worn or failed thermostat restores consistent temperature regulation and helps protect your appliance from overheating, shutdowns, or underheating.

• Monitors internal temperature and cycles the circuit on and off as designed
• Helps prevent overheating by opening at its calibrated threshold
• Failure can cause no heat, overheating, or intermittent cycling
• Irregular temperatures or longer run times are common symptoms

• Disconnect power (and shut off gas, if applicable). Allow the appliance to cool completely before service.
• Note wire positions; transfer one lead at a time to the new thermostat.
• Mount the thermostat firmly/flush against its mating surface or bracket for accurate sensing.
• Use a multimeter to check continuity per your model's service specs; replace if out of tolerance.

The Thermistor is an OEM part for Whirlpool dryers. This part measures the temperature inside the dryer drum and sends this information to the control board, which regulates the heat to ensure efficient drying.  

Causes of a bad thermistor can include regular wear and tear, exposure to high temperatures, or electrical faults.

Symptoms of a bad thermistor include:

• Dryer not heating or overheating
• Clothes taking longer to dry
• Inconsistent drying performance
• Error codes related to temperature issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This thermostat monitors temperature and opens or closes its electrical contacts to control and protect the appliance's heating circuit. Replacing a failed thermostat restores stable temperatures and helps prevent nuisance shutdowns or persistent no-heat issues. What it does:

• Senses temperature at its mounting location and switches the circuit on/off as designed
• Protects the heating system by interrupting power when temperatures exceed its rated limit
• Helps maintain consistent operation when the original thermostat is stuck open/closed or out of calibration
• Typical symptoms: no heat or intermittent heat, overheating/safety shutdowns, or failed continuity when tested cool

• 1 thermostat

• Disconnect power (and shut off gas supply if applicable) before servicing
• Note wire locations and transfer one at a time to the new thermostat
• Mount securely in the original position to ensure proper temperature sensing
• After installation, run a test cycle and monitor operation/temperature

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

• The dryer not heating or producing heat properly
• Error codes related to the gas system or ignition failure
• The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.