Steve for Model Number MDB7749AWB1 When we select a cycle, the correct lights work--BUT when we press the start button OR the cancel button machine does not start nor does it drain--(there is no water in it). Could the hi-temp fuse be the cause--or would all lights be out? Other than that, I can only assume that the control panel (p/n W10298356) has some type of problem. I do note that the female receptacle for the door closer is very loose and the door really does not latch closed correctly. That happened after I tried to move it manually with a flat blade screwdriver. (MY FAULT) Doesn't explain why machine start light and sequence wouldn't light and machine wouldn't start.. Was intermittent for a couple of days--then finally stopped entirely.
Answer Steve, If the "hi-temp fuse" was the issue, the dishwasher would not function and the LED's would not illuminate. Your suggestion of the control panel [W10356466] is on target (not the control board). When you dismantle the door, to access and replace the control panel, you'll need to check to see if you damaged the door latch WPW10404412 assembly or just moved something out of alignment. Read More... Answered by AppliancePartsPros.com | Friday, January 10, 2014