Answer Hello Frank. Here are the instructions for the problem your having from the manufacturer. Hope this helps. Check the door lock and make sure the lock light comes on. If not, replace the machine control board 12001725 and the wax motor WP22002119. If it does lock, check all the out of balance switches and make sure they are good, with no broken wires. If they are good, test the spin enable switch WP22002162 inside the latch assembly and make sure it is good. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, May 26, 2011