Customer Questions and Answers for Drive Motor Assembly by Whirlpool

William, The F11 error code indicates there's a communication error between the CCU WP8182689 and the MCU W10756692 or failed motor WP8182793. It usually winds up being a faulty MCU, but you need to check for any loose connections between the two control boards, and the motor. Then check the motor winding resistances with a multimeter ( on the motor check pin 1 to pin 2, pin 1 to pin 3 and pin 2 to pin 3 and should have the same resistance on all the checks, approximately 6 ohms.) If all checks OK, replace the MCU. Here's some meter usage information, should you need it [http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html] Good Luck and Thanks