Parts for Maytag MVWC415EW1: 04 - Basket And Tub Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This fabric softener dispenser replaces a worn or missing cup in your washer. It holds liquid softener and releases it automatically during the rinse cycle for even distribution and cleaner results without residue on clothes. What it does:

• Holds liquid fabric softener and dispenses it at the proper time in the cycle
• Helps reduce spotting or residue from pouring softener directly into the tub
• Replaces cracked, missing, or clogged dispensers that may leak or fail to dispense
• Restores consistent, mess-free softener delivery

• 1 fabric softener dispenser

• Disconnect power before servicing the washer
• Pull the old dispenser straight up to remove; some models have tabs—release carefully
• Clean any buildup from the mounting area to prevent future clogs
• Press the new dispenser fully into place and ensure it sits level and secure

• Periodically remove and rinse the dispenser; dilute thick softeners per product directions to avoid clogs.

The Washplate Bolt is an OEM part for Whirlpool washing machines. This bolt is designed to secure the washplate to the washer's drive shaft, ensuring stable and effective agitation during the wash cycle.

Causes of a bad washplate bolt can include stripping or wearing out from regular use, corrosion from exposure to water and detergents, or damage due to over-tightening or improper installation. A faulty bolt can compromise the washplate's stability and affect the washing machine's performance.

Symptoms of a bad washplate bolt include:

• The washplate being loose or wobbling during operation
• Unusual noises such as rattling or clunking during the wash cycle
• Poor cleaning performance due to ineffective agitation
• The washplate detaching from the drive shaft

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator Bolt Washer is an OEM part for Whirlpool washing machines. It sits beneath the agitator bolt, providing a secure and tight seal to ensure the agitator remains firmly attached to the drive shaft. This washer plays a crucial role in the smooth and effective operation of the agitator during the wash cycle.

You should replace this agitator bolt washer if it becomes worn out, cracked, or lost. Causes of a bad washer can include regular wear and tear, exposure to harsh detergents, or high levels of agitation that can degrade the material over time.

Symptoms of a bad agitator bolt washer include:

• The agitator being loose or wobbling during the wash cycle
• Unusual noises coming from the agitator area
• Ineffective washing performance
• The agitator not staying in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tub ring is the replacement sealing ring that fits around the washer's outer tub to help keep the wash basket secured and reduce vibration. It restores proper sealing and alignment for reliable washer operation. What it does:

• Provides a protective seal between the inner basket assembly and the outer tub
• Helps reduce noise and vibration caused by a loose or worn tub interface
• Prevents minor rubbing or chafing between rotating parts
• Can help address symptoms like unusual noise, rubbing sounds, or movement in the wash basket

• One tub ring

• Disconnect power and water supply before starting any repair
• Basic disassembly of the cabinet or tub may be required; follow the machine's service manual
• Use proper tools and take care not to damage the tub finish or nearby components

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

• Fastens panels, brackets, or internal parts to the cabinet/frame
• Helps maintain alignment to reduce vibration and rattling
• Replaces lost, stripped, or corroded screws
• Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

• Disconnect power; shut off water or gas if applicable
• Match thread and length to the original; replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

This replacement washplate is the low-profile impeller at the bottom of your top-load washer. It creates the wash action that moves fabrics through water and helps restore proper cleaning when the original plate is cracked, stripped, or warped.

• Generates water currents and fabric rollover for effective cleaning
• Transfers drive torque through the center hub to agitate the load
• Helps keep items from floating on the surface during the wash cycle
• Common failure signs: weak or no wash action, clothes not moving, grinding/clicking in wash, visible cracks or a stripped center that spins freely

• Disconnect power and turn off water before servicing
• Remove the center cap, then the mounting bolt; lift off the old washplate
• Clean/inspect the drive hub splines; align and press the new plate fully onto the shaft
• Reinstall and tighten the bolt, replace the cap, and run a quick test cycle to verify operation

The Whirlpool screw is an OEM replacement part responsible for securing various components and parts of your washing machine. These screws are designed to fasten different elements within the appliance, ensuring their stability and proper functioning. The specific location of these screws can vary depending on the washing machine model and design, but they are commonly used to secure panels, brackets, and other components in place.

This part fixes the following symptoms

• Excessive vibration or shaking during the wash or spin cycles
• Loud or unusual noises coming from the appliance
• Loose or wobbly parts within the machine
• Panels or components that become detached or dislodged
• Difficulty in assembling or disassembling parts during maintenance or repair

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Drive Hub Kit is an OEM replacement part for Whirlpool washers. This kit includes an important transmission component - the drive hub - along with mounting hardware. The drive hub transfers power from the washer motor to turn the wash basket and agitate laundry.

Symptoms of a bad drive hub can include:

• The washer failing to agitate clothes or spin excessively slow
• Strange noises coming from the drive assembly
• Difficulty shifting between cycles

Causes of a bad drive hub include normal wear over time, strain from heavy or unbalanced loads, or damage from impact or other external forces.

This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Drive hub retainer is an OEM replacement part for Whirlpool washing machines. It connects the drive motor and agitator gear, transmitting rotational power from the motor to enable drum rotation during the wash cycle. 

Causes of a bad retainer can include wear and tear over time, cracked or damaged retaining clips or plastic components, or failure of the retaining mechanism that secures the hub in place. 

Symptoms of a bad retainer include: 

• The washtub or drum not spinning during the wash cycle 
• Grinding or screeching noises coming from the drive components
• The agitator wobbling or becoming loose inside the washtub

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tie wire secures wiring and small components to a tree-style mounting post, helping keep harnesses organized and preventing chafing or loose connections. Durable metal construction holds wiring in place for reliable operation. What it does:

• Secures wiring bundles and small components to a tree-style mount or post
• Helps prevent wires from rubbing against sharp edges or vibrating loose
• Reduces risk of intermittent electrical connections caused by loose harnesses
• Keeps internal wiring organized for safer, cleaner repairs

• Tie wire

• Disconnect power and unplug the appliance before servicing
• Position wires on the tree mount and wrap or fasten the tie wire
• Trim or bend any sharp ends to avoid contact with other parts or wiring
• Replace if damaged, corroded, or no longer holds wiring securely

Note: Bearings are only available with the gearcase assembly.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Tub Seal is an OEM part for Whirlpool washing machines. Located between the outer tub and inner basket, it forms a barrier preventing leaks that could damage surrounding components and structures.

Causes of a bad tub seal can be cracks or compression failures due to repetitive impacts and stresses from continual clothes tumbling. Detergents and temperature fluctuations also break down rubber over decades when exposed to laundry environments.

Symptoms of a bad tub seal include: 

• Water leakage noticed around the base of the washer cabinet
• Reduced or inefficient cleaning from leaking wash water 
• Potential water damage risks to floors and home infrastructure

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This pump drain filter helps protect the appliance's drain pump by screening out debris before it enters the pump. A clean, intact filter supports proper draining and helps prevent clogs and pump damage.

• Screens debris before it reaches the drain pump
• Helps maintain proper draining performance
• May resolve issues like slow or incomplete draining, standing water, or drain-related noises
• Replacing a damaged or missing filter can reduce repeat clogs

• Unplug power and shut off water supply before service
• Access location varies by model; have towels ready for any residual water
• Note orientation of the old filter for correct placement
• After installation, check for leaks and run a brief drain cycle to verify operation

This machine screw secures components in place to maintain proper alignment and stability during appliance operation. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Provides a secure mechanical fasten for panels, brackets, or internal assemblies
• Helps correct rattling, vibration, or loose-fitting parts
• Useful when an original screw is stripped, corroded, or lost
• Sized to match 8-18 thread applications in compatible units

• Disconnect power and shut off water or gas before servicing
• Note original screw location and orientation for correct reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace any damaged clips or mounts the screw engages

This washer suspension rod kit supports and steadies the tub so your machine can spin smoothly with less vibration and noise. Replacing worn suspension helps reduce banging, off-balance interruptions, and wet loads after spin. What it does:

• Supports and centers the wash tub within the cabinet
• Dampens movement to reduce shaking, thumping, and "walking"
• Helps the washer reach and maintain proper spin speed
• Resolve UL/unbalanced errors, excessive vibration, and a tub that sags or leans

• Four suspension rods with pre-attached springs

• Disconnect power and water; move the appliance to access service panels safely
• Lift the top/remove the cabinet; support the tub during service
• Replace rods one at a time to keep the tub supported; match any color-coded positions
• Level the washer after reassembly; perform calibration/diagnostics if the model requires it

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire harness routes power and signals between a refrigerator's control and its components so the appliance can operate reliably. It replaces a damaged or worn harness to restore proper electrical connections and component function. What it does:

• Carries power and control signals between the main control and components (compressor, fans, lights, dispenser, etc.)
• Restores connection when burnt, frayed, or broken wires cause intermittent operation or component failure
• Helps stop shorts and reduces risk of erratic behavior caused by loose or damaged connectors
• Resolves symptoms like no power to a component, intermittent operation, or error/communication faults related to wiring

• One wire harness as shown

• Disconnect power (unplug or shut off breaker) before starting any work
• Observe connector orientation and secure all plugs; replace if terminals are corroded or damaged
• Route harness away from sharp edges, heat sources, and moving parts; use existing clips or ties to secure

This is a clear plastic hose that runs from the water level switch to the bottom of the tub.

The Water Level Pressure Switch Hose is an OEM part for Whirlpool washers, playing a critical role in the accurate measurement of water levels within the machine.  

Causes of damage to the Water Level Pressure Switch Hose can stem from natural wear and tear over time, leading to cracks or holes in the hose. 

Symptoms of a bad Water Level Pressure Switch Hose include:

• The washer overfills or underfills, indicating a problem with water level detection.
• Unusual noises during the fill cycle, which may suggest air leaks in the hose.
• Error codes related to water level or filling issues displayed on the washer.
• The machine stops mid-cycle due to incorrect water level readings.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This agitator for top-load washers mounts on the drive shaft to move clothes through water and detergent. Replace it to restore proper wash action when the original agitator is cracked, stripped, or wobbling. What it does

• Transfers the drive system's oscillating motion to churn and roll over laundry
• Keeps the load circulating for effective cleaning and rinsing
• Common symptoms of a failed agitator: no or weak agitation, clothes not moving, clicking/grinding during wash, visible cracks, or a loose fit on the shaft

• 1 agitator

• Disconnect power and shut off water before servicing
• Remove the fabric softener dispenser and agitator cap to access the retaining bolt
• Remove the bolt, lift out the old agitator, then align and seat the new agitator on the splined shaft; secure with the original bolt and cap
• Run a short wash test to ensure proper engagement and agitation

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.