Parts for Ge GDT535PSM0SS: Body Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replacement door spring for dishwashers. Provides tension to help the door open and close smoothly. Replace if broken, worn, or door won't stay open.

Adjustable leveling leg for dishwashers. Screws into the base frame to set height and stabilize the unit. Replace if worn, broken, or missing.

The Heating Element is an OEM replacement part for GE dishwashers. It is responsible for heating the water during wash cycles and assisting in drying dishes at the end of the cycle. The heating element ensures optimal cleaning and drying performance by raising the water temperature and promoting evaporation.

Over time, heating elements can fail due to wear, mineral buildup, or electrical issues. A malfunctioning element may result in poor cleaning or drying performance.

Symptoms of a bad heating element include:

• Dishes remaining wet after the drying cycle
• Water not heating adequately during the wash cycle
• Error codes related to temperature or heating issues
• Visible damage, such as cracks or corrosion on the element

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the dishwasher heating element to the tub from underneath. Replace if cracked, stripped, or missing to prevent leaks at the element mounting point.

Water pooling under your dishwasher? A loose or missing heating element nut causes leaks and unstable heating. Simple fix secures the element firmly.

Fix electrical grounding issues in your dishwasher with this metal grounding bracket. Ensures safe chassis ground connection and protects components.

Mounting screw for dishwasher tub assembly. Secures internal components like spray arms and baskets. Replace if stripped, corroded, or missing.

Replaces cracked, leaking, or worn drain hoses in your dishwasher. Creates the required elevated loop to prevent backflow. Essential for proper drainage.

Fix dishwasher leaks at the inlet with this water funnel assembly. Includes seals to restore proper water flow. Twist-lock design for easy installation.

Directs water from inlet to tub through the fill funnel. Replace if cracked or leaking to restore a sealed fill path and prevent water damage.

Replace this dishwasher O-ring when hardened, cracked, or flattened to restore watertight seals and stop leaks. Verify fit with your model number.

Conduit docking port for dishwashers. Connects wiring harness at the base of the unit. Replace if cracked, broken, or connection point is damaged.

Silicon-controlled rectifier that switches and regulates power to heating or motor circuits. Replace if the component is damaged, burned out, or failing.

Connects dishwasher door to spring mechanism to prevent door from dropping when opened. Replace if cable is broken, frayed, or detached from pulley.

Door hinge pulley for dishwashers. Works with springs and cables to balance door movement. Replace if cracked, broken, or causing uneven door operation.

Zinc-plated 10-32 x 1/4 inch screw secures internal panels and brackets in dishwashers. Replace missing, stripped, or corroded fasteners to restore fit.

Encloses the power-connection compartment at the base of your dishwasher. Replace if cracked, broken, or missing to protect wiring from debris.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Dishwasher not filling with water or filling too slowly? The water inlet valve controls water flow into the tub. DIY-friendly repair with video guide.

10-32 x 9/16" machine screw secures dishwasher panels, brackets, and internal assemblies. Replace missing, stripped, or damaged fasteners to restore fit.

If your dishwasher won't start or has no power, the control board fuse may be blown. This 4.1 amp fuse protects electronic components from overcurrent.

Fix a dishwasher with no power or that trips the breaker. This control board jumper wire restores electrical connections. Quick 15-minute repair.

Fix a dishwasher that won't start or respond to controls. This machine control board manages all automated functions. Requires multimeter testing.

Fix a dishwasher that won't start or has intermittent power with this AC harness assembly. Restores safe voltage distribution to control and components.

Replace a cracked or damaged control box bottom housing that's exposing your dishwasher's electronics. Secures control board and shields components.

Fix unresponsive controls or a damaged front panel with this dishwasher control box top cover. Protects internal electronics from moisture and dust.

Leaking dishwasher? A damaged hose clamp may be allowing water to escape at pump or drain connections. This clamp secures hoses to prevent leaks.

Secures hoses and tubing in your dishwasher to prevent leaks and ensure proper water flow. Replace if you notice water dripping or leaking around connections. Verify fit with your model number before ordering.

Stainless steel mounting screw for dishwasher components. Replaces rusted, corroded, or missing screws on handles, racks, and internal parts.

Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This latch assembly secures the door and activates switches. 5-10 min fix.

Seals dishwasher door perimeter to prevent water leaks during operation. Replace if you notice leaking from door sides or bottom. Easy 5-minute install.

Secures your dishwasher underneath the kitchen countertop. Replace if the bracket is cracked, broken, bent, or missing from installation.

Secure your dishwasher to the underside of countertops with this screw and button plug kit. Replace stripped, missing, or damaged fasteners.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.