Parts for QAS740RM2SS: Body Parts

This oven rack is a replacement sliding shelf that holds cookware and bakeware securely inside the oven for consistent cooking and easy access. Restores proper support and usable oven capacity when the original rack is missing, bent or worn. What it does

• Provides a stable, level surface for pans, baking sheets and cookware
• Slides in and out on oven rack supports for easy loading and checking food
• Replaces warped, bent or rusted racks that cause uneven cooking or tipping
• Helps restore full oven usable space and cooking flexibility

• One oven rack

• Install by sliding the rack into the existing oven rack supports until fully seated
• Allow oven to cool and disconnect power at the breaker if performing work near electrical components
• Use oven mitts or gloves when handling to avoid sharp edges or residual heat
• No special tools typically required; if rack won't seat, check for obstructions or damaged support rails

This tablet cover replaces a damaged or missing control-panel bezel to restore the look and basic protection of the appliance control area. It helps keep buttons and switches covered and prevents direct contact with wiring and components. What it does:

• Covers and protects the control panel area from spills, dirt, and everyday wear
• Restores cosmetic appearance when the original cover is cracked, warped, or broken
• Keeps the control buttons and display area secured and aligned
• Prevents accidental contact with internal components behind the console

• One tablet cover

• Disconnect power to the appliance before starting any work
• Removal typically requires removing the console or trim screws and lifting the old cover off its mounting tabs
• Handle plastic tabs gently to avoid breakage; reuse existing fasteners if in good condition

This housing receptacle is the molded mounting and connection point that secures and protects the oven/range control wiring and plug-in module, helping maintain reliable electrical contact and safe operation of the control components. What it does:

• Provides a secure housing for the control module or wiring receptacle to prevent movement and wear
• Protects electrical connections from abrasion and incidental contact
• Keeps the control harness aligned for consistent plug-in engagement
• Can resolve issues like intermittent control operation or loose control module connections

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Basic hand tools are typically required; note wire harnesses and screw locations before removal.
• Handle plastic tabs and mounting points gently to avoid breakage; replace any damaged fasteners.

This plunger switch is the push-style electrical switch that completes a circuit when an actuator is depressed, restoring reliable on/off signaling. Use it to replace a worn or broken plunger switch that causes intermittent or non-responsive operation. What it does:

• Closes an electrical circuit when the plunger is pushed, sending a signal to the appliance control.
• Commonly used where a door, lever or dispenser actuator must register a position or user input.
• Can correct symptoms like intermittent operation, a dispenser or mechanism that won't activate, or a stuck/unresponsive actuator.
• Acts as a direct mechanical-to-electrical interface—no electronics required.

• Disconnect power (unplug or turn off breaker) before servicing to avoid shock.
• Remove the access panel or housing to reach the switch; note actuator orientation before removal.
• Disconnect terminals or harness, then swap the old switch for the new one; reconnect terminals securely.
• Test the plunger action and appliance function before reinstalling panels.

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

• Diminished light output, making it hard to see inside the oven
• Cracks or damage to the lens itself
• Discoloration or cloudiness that cannot be cleaned off
• The lens becoming loose or falling off

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bail is the replacement door/handle support used to secure a handle or attach components to an appliance door or panel. It restores a stable grip and proper attachment when the original bail is cracked, bent, or missing. What it does

• Replaces a worn, broken, or missing bail that supports a door handle or accessory
• Restores a secure connection so the handle or component doesn't wobble or detach
• Helps prevent further damage from a loose or improperly supported handle
• Fits into the existing mounting points to re-establish proper alignment

• One replacement bail

• Disconnect power and remove any removable panels or doors before starting
• Use basic hand tools; retain original screws and fasteners unless damaged
• Align bail with existing mounting holes and secure without over-tightening

This is a replacement 8-18 x 5/16 machine screw used to secure appliance panels and components. It restores proper fastener fit so parts stay mounted and operate safely. What it does:

• Fastens panels, brackets, and small components where an 8-18 x 5/16 screw is specified
• Prevents loose parts, rattling, and misalignment caused by missing or worn screws
• Provides the correct thread size and length for reliable reattachment
• Works wherever the OEM calls for this specific 8-18 x 5/16 screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to threads or mounting surfaces
• If replacing multiple fasteners, use matching screws to maintain proper fit and function

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This door gasket seals the refrigerator door to help maintain a consistent internal temperature and reduce energy loss. It replaces a worn, torn, or hardened seal to improve cooling performance and reduce frost buildup. What it does:

• Creates an airtight seal between the door and cabinet to help keep cold air in
• Helps prevent warm air infiltration that can cause frost, condensation, or temperature swings
• Reduces compressor run time and energy waste caused by a failing seal
• Fits the refrigerator door opening; restores proper door shut and alignment

• One door gasket

• Unplug the appliance before starting any repair
• Clean the door frame and gasket channel before installing to ensure a proper seal
• Soften and position the gasket in the channel, then fasten any retainers or screws if present; follow OEM instructions for final seating
• If the gasket is stiff, warm it (per OEM guidance) to help form fit; avoid cutting or altering the gasket unless specified by the manufacturer

Size: 10-32 GXTT FLP.595 S