Parts for Hot Point RAS240DM2WW: Body Parts

This left side complement is a refrigerator interior trim piece that restores proper support and alignment for door components and liners. Replaces damaged or cracked left-side trim to help the door seal and close correctly. What it does:

• Replaces a cracked, broken, or missing left side interior trim piece
• Helps secure door liners and internal components to the cabinet frame
• Restores proper alignment so the door closes and seals as intended
• Reduces rattle or movement caused by a loose or damaged trim

• One left side complement piece

• Disconnect power to the appliance before beginning any repair
• Remove the door liner/panels and retainers as needed to access the left side complement
• Use basic hand tools; handle trim carefully to avoid damaging adjacent liners or gaskets
• OEM instructions for correct removal and torque specifications

This oven rack is a replacement sliding shelf that holds cookware and bakeware securely inside the oven for consistent cooking and easy access. Restores proper support and usable oven capacity when the original rack is missing, bent or worn. What it does

• Provides a stable, level surface for pans, baking sheets and cookware
• Slides in and out on oven rack supports for easy loading and checking food
• Replaces warped, bent or rusted racks that cause uneven cooking or tipping
• Helps restore full oven usable space and cooking flexibility

• One oven rack

• Install by sliding the rack into the existing oven rack supports until fully seated
• Allow oven to cool and disconnect power at the breaker if performing work near electrical components
• Use oven mitts or gloves when handling to avoid sharp edges or residual heat
• No special tools typically required; if rack won't seat, check for obstructions or damaged support rails

This tablet cover replaces a damaged or missing control-panel bezel to restore the look and basic protection of the appliance control area. It helps keep buttons and switches covered and prevents direct contact with wiring and components. What it does:

• Covers and protects the control panel area from spills, dirt, and everyday wear
• Restores cosmetic appearance when the original cover is cracked, warped, or broken
• Keeps the control buttons and display area secured and aligned
• Prevents accidental contact with internal components behind the console

• One tablet cover

• Disconnect power to the appliance before starting any work
• Removal typically requires removing the console or trim screws and lifting the old cover off its mounting tabs
• Handle plastic tabs gently to avoid breakage; reuse existing fasteners if in good condition

This is a replacement 8-18 x 5/16 machine screw used to secure appliance panels and components. It restores proper fastener fit so parts stay mounted and operate safely. What it does:

• Fastens panels, brackets, and small components where an 8-18 x 5/16 screw is specified
• Prevents loose parts, rattling, and misalignment caused by missing or worn screws
• Provides the correct thread size and length for reliable reattachment
• Works wherever the OEM calls for this specific 8-18 x 5/16 screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to threads or mounting surfaces
• If replacing multiple fasteners, use matching screws to maintain proper fit and function

This oven bottom panel provides the flat inner surface that supports cookware and protects oven components from spills and debris. It restores a clean, even cooking surface and helps contain drips for easier cleanup. What it does:

• Covers and protects the oven cavity floor and underlying components from food spills and debris
• Provides a stable surface for pans and baking sheets to sit on during cooking
• Helps prevent direct access of drips to lower heating elements
• Can reduce smoke from burned-on spills by replacing a warped or damaged bottom

• One oven bottom panel

• Disconnect power to the appliance before starting work
• Remove oven racks and any broiler drawer or lower panel as needed to access mounting screws
• Use caution—edges may be sharp; wear gloves and eye protection
• Reinstall all removed parts and test the oven on a low setting to verify proper fit and operation

This housing receptacle is the molded mounting and connection point that secures and protects the oven/range control wiring and plug-in module, helping maintain reliable electrical contact and safe operation of the control components. What it does:

• Provides a secure housing for the control module or wiring receptacle to prevent movement and wear
• Protects electrical connections from abrasion and incidental contact
• Keeps the control harness aligned for consistent plug-in engagement
• Can resolve issues like intermittent control operation or loose control module connections

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Basic hand tools are typically required; note wire harnesses and screw locations before removal.
• Handle plastic tabs and mounting points gently to avoid breakage; replace any damaged fasteners.

A replacement cover support base that secures the appliance's top/cabinet cover and helps keep the control area stable for reliable operation. Restores proper fit and reduces movement or rattling of the top cover assembly. What it does:

• Provides a mounting surface that holds and supports the top/cabinet cover
• Keeps the control/console area aligned to prevent sagging or misfit
• Helps stop vibration and rattling caused by a damaged or missing support
• Restores proper cover spacing to reduce gaps and improve appearance

• Disconnect power to the appliance before beginning any repair
• Basic hand tools typically required; remove top/cabinet cover or console to access mount
• Inspect surrounding clips and fasteners and replace any that are damaged

This cover support base secures the appliance control/console cover, restoring proper support and alignment so the cover stays in place during use and service. Fits the original mounting location to prevent sagging or vibration. What it does:

• Supports the control or console cover at its mounting point to keep the cover stable
• Restores proper cover alignment to reduce rubbing, rattling, and gap-related noise
• Allows safe access to internal components by holding the cover correctly during service
• Replaces cracked, worn, or broken support pieces that cause loose or unstable covers

• Disconnect power before beginning any service to avoid shock or injury
• Basic hand tools are typically required to remove the cover and replace the support
• Handle the control/console cover carefully to avoid scratching or damaging adjacent parts
• Verify alignment and secure mounting after installation; do not overtighten fasteners

This is a #8-18 machine screw used to secure panels and components on compatible appliances. It replaces missing, stripped, or damaged screws so parts stay fastened and appliances run quietly and safely. What it does

• Fastens panels, trim, brackets, and small components to the appliance chassis
• Restores secure mounting when a screw is missing or damaged
• Helps eliminate rattling or movement caused by loose fasteners
• Used where a #8-18 machine-thread screw is specified by the manufacturer

• One #8-18 machine screw

• Use the correct driver and size to avoid stripping the head or threads
• Hand-start the screw to ensure proper thread engagement before using a power tool
• Do not overtighten; stop when parts are snug to avoid cracking plastic or deforming metal
• Disconnect power to the appliance before accessing internal components for repair

This spacer base provides a durable mounting spacer used to properly position and support appliance components, helping maintain correct alignment and fit for reliable operation and safe use. What it does:

• Positions and spaces panels or assemblies to ensure proper alignment
• Supports components to reduce stress and vibration during operation
• Helps maintain correct clearances for seals, doors, or trim pieces
• Can prevent rubbing or binding caused by a missing or damaged spacer

• Inspect surrounding parts and mounting points for wear before replacing the spacer
• Use correct screws/fasteners and tighten to OEM torque specifications where provided
• Disconnect power to the appliance before performing any work that exposes wiring or electrical components

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

• Diminished light output, making it hard to see inside the oven
• Cracks or damage to the lens itself
• Discoloration or cloudiness that cannot be cleaned off
• The lens becoming loose or falling off

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bail is the replacement door/handle support used to secure a handle or attach components to an appliance door or panel. It restores a stable grip and proper attachment when the original bail is cracked, bent, or missing. What it does

• Replaces a worn, broken, or missing bail that supports a door handle or accessory
• Restores a secure connection so the handle or component doesn't wobble or detach
• Helps prevent further damage from a loose or improperly supported handle
• Fits into the existing mounting points to re-establish proper alignment

• One replacement bail

• Disconnect power and remove any removable panels or doors before starting
• Use basic hand tools; retain original screws and fasteners unless damaged
• Align bail with existing mounting holes and secure without over-tightening

This bake element replaces the lower heating element used for baking in electric ovens, restoring even oven temperatures so food cooks properly. Designed to fit compatible GE ranges and restore standard bake function. What it does:

• Heats the oven cavity during bake cycles to produce consistent oven temperatures.
• Commonly replaces a broken, burnt, or non-glowing element that prevents baking.
• Fixes symptoms like no heat from the oven during bake, uneven cooking, or visible breaks/warping in the element.
• Works as the lower/bake heating element; not for broil or convection-only functions.

• 1 bake element (lower)

• Disconnect power to the appliance before servicing to avoid shock; this is an electrical component.
• Remove oven racks and access the element screws from inside the oven; handle carefully to avoid bending.
• Verify terminal connections are secure and match original orientation before restoring power.

This 240V broil heating element restores high, direct heat for electric ovens so broiling works evenly again. It replaces a burned, broken, or weak broil element to bring back proper browning and searing performance. What it does:

• Heats the oven's broil zone to deliver intense, direct top heat for broiling and finishing dishes
• Replaces a visibly damaged, broken, or non-heating broil element
• Helps stop symptoms like no broil heat, uneven browning, or oven sparking at the top element
• Designed to match OEM fit and connections for straightforward replacement

• Disconnect power to the appliance at the breaker before starting any work.
• Handle the element carefully to avoid bending; wear gloves to protect hands from sharp edges.
• After installation, restore power and test broil function; stop and re-check wiring if arcing or unusual behavior occurs.

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

Size: 10-32 GXTT FLP.595 S