Parts for Frigidaire GMOS196CAFA: Cabinet,Oven Parts

This replacement cover protects and finishes a specific component area on your appliance. Replacing a cracked or missing cover helps keep out debris, restores proper protection, and maintains a clean, factory appearance.

• Shields the underlying assembly from dust and accidental contact
• Maintains proper enclosure as designed by the manufacturer
• Direct replacement when the original is cracked, warped, or missing
• Typical symptoms include a loose or rattling panel, broken tabs, or exposed parts

• Disconnect power before servicing; also shut off gas/water if applicable
• Note screw/clip locations and orientation for correct reassembly
• Transfer any reusable hardware from the old cover
• Do not overtighten fasteners into plastic to avoid damage

This genuine replacement refrigerator water filter cartridge improves drinking water quality by reducing taste- and odor-causing particles and other common impurities for clearer, better-tasting water straight from the dispenser. What it does

• Filters sediment and chlorine taste/odor to improve water flavor
• Helps reduce common particulate contaminants found in tap water
• Can restore normal water appearance and taste when an old filter is causing cloudiness or off-flavors
• Replaces a worn or clogged cartridge that may cause reduced dispenser flow

• Follow your refrigerator manufacturer's instructions for removal and insertion—no tools usually required
• Flush several cups of water after installation to clear air and initial carbon fines
• Dispose of used cartridge according to local regulations

This replacement motor restores power to the appliance's fan or blower assembly so airflow and cooling performance resume. Use it to replace a failed or noisy motor and get your appliance running normally again. What it does

• Spins the fan/blower or driven component to circulate air or operate the mechanism.
• Replaces motors that stall, hum, or do not run at all.
• Can resolve reduced airflow, warm compartments, or uneven cooling when motor failure is the cause.
• Designed to match the appliance's original motor function and mounting.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Verify the motor part number and physical fit against the unit before installation.
• Basic hand tools required; access may require removing panels or shelves.

This replacement capacitor helps the refrigerator's motor start and run more reliably, restoring normal cooling operation and reducing hard-start symptoms. It's a direct-fit component used in compatible Frigidaire refrigeration systems. What it does:

• Provides the electrical pulse needed for the compressor/condenser motor to start and maintain stable operation
• Helps prevent slow or failed starts that can cause warm temperatures or compressor strain
• Can reduce excessive motor humming or cycling tied to a failing capacitor
• Supports overall cooling performance when the original capacitor is weak or faulty

• Capacitor as shown

• Disconnect power to the appliance before accessing electrical components
• Handle and connect terminals carefully to avoid short circuits; observe polarity/terminal labeling if present
• Dispose of the old capacitor per local electronic waste regulations

Replacement electrical diode for Frigidaire refrigerators that directs current flow to protect control circuitry and help defrost and compressor systems operate correctly. Installs quickly to restore proper electrical function when a diode fails. What it does:

• Allows electrical current to flow in only one direction to protect sensitive control and compressor circuits.
• Prevents backfeed that can damage control boards or other components.
• Common symptom: intermittent or no compressor/defrost operation.
• Other symptoms: blown fuses, tripped breakers, or erratic electrical behavior in the appliance.

• Disconnect power to the appliance before beginning any service.
• Handle electrical connections carefully; use insulated tools and avoid touching live terminals.
• Confirm connector fit and orientation before finalizing installation.

The Thermostat is an OEM part for Frigidaire microwaves. The thermostat accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

The Thermostat is an OEM part for Frigidaire microwaves. Situated near the top of the microwave cavity, it accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

This mechanical thermostat controls refrigerator temperature by sensing evaporator or cabinet temperature and switching the compressor and fans on and off. Replaces a worn or faulty control to help restore consistent cooling and temperature regulation. What it does

• Senses temperature and closes/open circuit to run the compressor and cooling fans
• Helps maintain set temperature by cycling refrigeration system components
• Commonly linked to symptoms like warm or fluctuating temperatures, compressor not running, or continuous running
• Works as the control point for user temperature settings

• One thermostat

• Disconnect power to the appliance before accessing controls to avoid shock or injury
• Access may require removing interior panels or control housing
• Handle sensing bulb and capillary tube carefully to avoid kinks or damage

This thermostat is a temperature-sensing switch used in select appliances to control operation or provide over-temperature protection. It opens or closes the circuit at a calibrated point to help maintain proper, consistent performance. What it does

• Senses temperature at its mounting/location and switches contacts at a set point
• Regulates cycling of the system or ends a heating/cooling/defrost event as designed
• Helps prevent overheating or overcooling conditions and protects components
• Supports stable, reliable operation when the original thermostat fails

• Runs continuously or won't cycle off
• Shuts off too soon or won't turn on
• Inconsistent temperature (too warm/too cold)
• Erratic cycling or failure to maintain set temperature

• 1 thermostat

• Disconnect power before servicing; allow any hot surfaces to cool
• Note wire positions; move leads one at a time to the new thermostat
• Mount in the original location and orientation; ensure firm contact/fit
• Route any sensing bulb/capillary exactly like the original; avoid kinks

This temperature sensor monitors internal fridge/freezer temperature so the control board can regulate cooling and defrost cycles for more consistent temperatures and food safety. What it does

• Measures compartment temperature and sends readings to the control board.
• Helps the refrigerator maintain set temperatures by enabling accurate cooling cycles.
• Supports proper defrost control when used in defrost/evaporator applications.
• A failing sensor can produce temperature fluctuation, poor cooling, or longer run times.

• One temperature sensor

• Disconnect power before servicing to avoid shock or compressor damage.
• Handle the sensor and connector gently; avoid pulling on wires.
• Verify location and routing match the original; secure sensor to prevent contact with moving parts.

This evaporator fan assembly circulates cold air through the freezer and refrigerator compartments to help maintain even temperatures and proper cooling. Replaces a worn or failed fan to restore airflow. What it does:

• Spins to move cold air across the evaporator coil and into the appliance interior
• Commonly linked to symptoms like unusual noise, weak cooling, or no airflow in compartments
• Helps prevent frost build-up by maintaining steady airflow over the coil
• Works with the appliance's evaporator motor circuit and fan housing

• One evaporator fan assembly

• Disconnect power to the appliance before beginning any work
• Access may require removing interior panels or the evaporator cover; follow your model's service instructions
• Handle the fan blades and motor carefully to avoid damage; avoid contact with sharp sheet metal and edges
• Test the fan operation after reassembly and restore all panels and fasteners

The fuse is a protective link in the appliance's power circuit. When excessive current or a short is detected, it opens the circuit to help safeguard wiring and electronics. A blown fuse often leaves the unit completely unresponsive.

• Interrupts power during an overcurrent or short to prevent further damage
• Helps protect control boards, motors, and wiring
• Typical symptoms: no power, blank display/controls, won't start
• Tests open (no continuity) when blown

• Disconnect power at the breaker or unplug before servicing
• Replace only with the same type and rating specified by the manufacturer
• If a new fuse blows again, locate and correct the underlying short or failed component before further use
• For microwave repairs, high-voltage capacitors can retain a dangerous charge.

This replacement refrigerator water filter cartridge helps restore clean tasting water and ice by trapping common impurities. Designed as a direct-fit replacement to maintain your fridge's filtered water supply and improve taste clarity. What it does:

• Filters particulates and common contaminants to improve water and ice taste
• Helps reduce visible sediment and cloudiness from the dispenser and ice maker
• Restores normal dispensing performance when an old filter causes off-flavors or odors
• Supports consistent filtered water flow when installed and maintained

• Turn off the water supply and follow the refrigerator's filter-replacement instructions before starting
• Push/rotate or slide per your model's procedure until the filter locks in place; ensure a secure seal
• Run water through the dispenser for a short time after installation to flush air and initial carbon fines
• Replace regularly per the refrigerator manufacturer's recommendation or sooner if flow decreases or taste returns

The Lamp is an original and genuine OEM replacement part for Frigidaire microwaves. It is located inside the microwave and provides light to easily see food and monitor cooking progress.

Causes of a bad lamp can be natural bulb burnout over time, damage from foods accidentally jostling the lamp during cooking, or general wear and tear.

Symptoms of a bad lamp include:

• Dimming or flickering light inside the microwave when in use
• No light turning on when the microwave is powered on
• Broken or cracked bulb housing

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

• The microwave failing to operate or function properly with the door closed  
• Inability to start or pause operation when the door is opened
• Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

The Door Switch is an OEM part for Frigidaire microwaves, designed to ensure the appliance operates safely by signaling when the door is securely closed. This switch is critical for preventing the microwave from running if the door is open, a key safety feature that protects users from exposure to microwave radiation.

Causes of a bad Door Switch can include mechanical failure due to normal wear and tear from repeated opening and closing of the microwave door. 

Symptoms of a bad Door Switch include:

• The microwave not starting or heating when the door is closed.
• The appliance continuing to operate when the door is opened.
• Intermittent operation or sudden stopping during use.
• Displaying error messages related to the door or switches.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement switch restores reliable on/off control to the circuit it serves. When the original wears out or overheats, installing a new switch can resolve non-responsive controls and intermittent operation so your appliance functions as intended.

• Opens and closes an electrical circuit when actuated by the appliance's lever, button, or mechanism
• A failed switch can cause no response, intermittent operation, or components that won't turn off
• Common signs include a stuck/loose actuator or burned/broken terminals
• Continuity testing with a multimeter can switch failure

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Note/photograph wire locations and transfer one lead at a time to matching terminals
• Use needle-nose pliers to remove spade connectors—do not pull on the wires
• Verify continuity and test operation before reassembly

This replacement electrical wire harness routes power between components so your appliance can run reliably. It restores connectivity for circuits affected by damaged or worn wiring. What it does

• Carries electrical current between internal components to restore power and signal continuity.
• Replaces frayed, cut, or burnt wiring that can cause intermittent operation or component failure.
• Helps eliminate arcing, visible burn marks, or loose-disconnect issues at terminals.
• Matches original connector types and color-coded leads for a straightforward swap.

• Always disconnect power before starting any repair to avoid shock or injury.
• Verify connector orientation and wire colors match the original before finalizing connections.
• Route and secure the harness away from moving parts and hot surfaces to prevent wear.

This thermostat is the temperature control that tells the refrigerator when to run and when to stop, helping keep food at the right temperature. Replaces a failed or out-of-spec temperature switch to restore normal cycling. What it does:

• Senses interior temperature and opens/closes the compressor circuit to regulate cooling
• Can stop excessive running if the control is functioning correctly
• Commonly linked to symptoms like inconsistent temperatures, fridge running nonstop, or not cooling
• Works with the fridge's control system—does not include user interface knobs or wiring harnesses unless specified

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle sensing bulb/capillary tube carefully—do not kink or excessively bend
• Verify correct mounting location and electrical connections per OEM instructions

This interior lamp restores lighting inside the refrigerator so you can clearly see food and shelves. It replaces a burned-out or damaged light to improve visibility when loading, unloading, or checking contents. What it does:

• Provides interior illumination for the fresh food compartment.
• Replaces a bulb or lamp assembly that is burned out, dim, or flickering.
• Helps you locate items quickly and reduces the need to open the door longer to find things.
• Works as the appliance's primary interior light source when the door switch is activated.

• Always disconnect power (unplug the appliance or shut off circuit power) before servicing the light.
• Allow the old lamp to cool before removing; handle bulbs or glass components carefully to avoid breakage.
• Use a soft cloth or gloves when installing to avoid oils on bulbs that can shorten life.
• After installation, restore power and test the lamp by opening the door or actuating the door switch.

This heating element replaces the oven's bake element to restore even baking and browning. It heats the oven cavity so food cooks properly and helps maintain set temperatures for reliable results. What it does:

• Heats during the bake cycle to provide consistent oven temperature and even cooking
• Replaces a burned-out, visibly broken, or non-heating bake element
• Helps resolve symptoms like no heat on bake, uneven baking, or visible element damage
• Works with the oven's control and safety systems to cycle heat as needed

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle gently to avoid bending or touching element terminals; reconnect wires to matching terminals
• Inspect mounting and door seals while installing; tighten mounting screws securely but do not overtighten

This is a stamped metal mounting bracket that secures internal components to the appliance frame, restoring proper alignment and support for affected assemblies. Replace a damaged or missing bracket to stop movement and maintain structural fit. What it does:

• Secures internal panels or assemblies to the cabinet to prevent shifting or vibration
• Restores correct alignment for attached components, helping reduce rattling or misfit
• Maintains stable mounting for controls, trim, or wiring harnesses that rely on frame attachment
• Works where a bent, cracked, or missing bracket causes loose parts or improper clearances

• Typical install requires basic hand tools; disconnect power before starting
• Inspect surrounding fasteners and mating surfaces; replace any damaged screws or clips
• Reinstall carefully to avoid bending the bracket; verify secure fit and component alignment

This replacement lever restores reliable manual control of the appliance component it attaches to, letting the door, dispenser or mechanism operate smoothly and predictably. Durable molded construction resists wear from normal use. What it does

• Replaces a broken, cracked or worn lever that no longer engages or pivots correctly
• Restores proper mechanical linkage so doors, latches or dispensers can open and close as intended
• Prevents slipping, binding or intermittent operation caused by damaged lever geometry
• Matches the OEM shape to fit mounting posts and pivots without modification

• One replacement lever

• Disconnect power (and water if applicable) before starting any repair
• Remove the panel or housing that covers the lever mounting area to access fasteners and clips
• Keep small screws and clips organized; lever typically secures on a post or with a retaining clip

This replacement lever restores the original lever action so your appliance opens, closes or engages controls smoothly. It's a direct-fit part that replaces a cracked, worn or broken lever to regain normal operation. What it does:

• Replaces a damaged lever that prevents a door, latch or control from operating properly
• Provides a secure pivot or release point so components engage and disengage as intended
• Common symptom fixes: lever broken, loose, stuck, or not engaging reliably
• Durable plastic construction matches the OEM fit and alignment

• Disconnect power or unplug the appliance before starting any repair
• Remove any nearby panels or fasteners to access the existing lever; retain screws for reassembly
• Align the new lever on its pivot, then snap or fasten it into place without forcing parts

This is a replacement tension spring that restores proper tension and movement on compatible Frigidaire appliance components. It helps the mechanism operate smoothly and reduces sagging, binding, or uneven motion. What it does:

• Provides tension for hinge or linkage assemblies so doors or moving parts return and stay aligned
• Restores smooth, controlled movement and reduces slapping or sudden drops
• Helps prevent binding or uneven operation caused by a weakened or broken spring
• Commonly used where a small coil spring is required to maintain part position or preload

• One tension spring

• Disconnect power and remove food/items before accessing appliance interiors or doors
• Use gloves and eye protection; springs can be under tension and may release suddenly
• Note spring orientation and attachment points before removal so reassembly matches OEM positioning

This wrapper is a molded trim panel that covers and protects an appliance cabinet area for a clean, finished appearance and to hide internal components. It restores the appliance's exterior look and helps prevent dirt buildup. What it does:

• Covers and protects internal cabinet/frame components from debris and damage
• Restores a smooth exterior surface and improves appliance appearance
• Helps direct airflow and channel clearance around the cabinet area
• Replaces cracked, warped, or cosmetically damaged trim that can catch dirt

• One wrapper

• Disconnect power to the appliance before starting any repair
• Remove adjacent panels, shelves, or doors as needed to access fasteners
• Handle edges carefully—plastic trim can be sharp or brittle when damaged
• Use the OEM fasteners and follow manufacturer torque guidance to avoid warping

This mounting nut kit secures a threaded connection or component inside your appliance, keeping it tight and stable during operation. Replacing a worn or stripped nut restores a solid hold and helps prevent leaks, rattling, and poor performance. What it does:

• Fastens a component or fitting to its mating surface, maintaining proper alignment
• Restores grip when original threads are stripped, cracked, or worn
• Helps prevent vibration-related loosening during cycles
• Can resolve symptoms such as a loose/wobbly assembly, rattling noises, seepage at the joint, or visible thread damage

• One mounting nut kit

• Disconnect power; shut off water supply if the joint carries water
• Support the mating component while installing to avoid strain on plastic parts
• Start threads by hand to prevent cross-threading; tighten only until snug—do not overtighten
• Inspect any related gasket/O-ring and replace if worn or damaged

The Vent Damper is an OEM part for Frigidaire microwaves. It is designed to control the flow of air through the microwave’s ventilation system, ensuring proper ventilation during operation. This component helps to prevent the backflow of air, keeping the microwave's interior and its surroundings free from unwanted odors and heat.

Causes of a bad vent damper can include wear and tear over time, accumulation of grease or debris, or damage from external impact. 

Symptoms of a bad vent damper include:

• Poor ventilation
• Unusual odors lingering around the microwave
• Excessive heat buildup
• Increased noise during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Damper is an OEM part for Frigidaire microwaves. This part regulates airflow within the microwave, ensuring that steam and odors are properly vented out during cooking.

Causes of a bad damper can include wear and tear over time, buildup of grease and debris, or damage from high temperatures.  

Symptoms of a bad Damper include:

• Poor ventilation during cooking, leading to lingering odors and steam
• The microwave overheating or not ventilating properly
• Unusual noises coming from the damper area
• The damper not opening or closing as it should

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This Support Ring is an OEM part for Frigidaire microwaves. This support ring is an integral component that sits beneath the microwave's turntable, providing stable and balanced support. It ensures the smooth rotation of the turntable, which is essential for even cooking and heating food. 

The support ring can become worn or damaged due to regular use, leading to issues with the turntable's rotation. Common causes of deterioration include mechanical stress, uneven weight distribution from dishes, or accidental damage.

Symptoms of a faulty support ring include:

• Unsteady or wobbly turntable movement.
• The turntable struggling to rotate or not rotating at all.
• Noises such as scraping or clicking when the microwave is in operation.
• Uneven cooking or heating of food, indicating a disruption in turntable motion.
• Visible cracks, breaks, or warping of the support ring.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Glass Turntable Plate is an OEM part for Frigidaire microwaves. As the surface food rests upon during cooking, it features heat-resistant tempered glass construction suitable for high-power microwave usage. 

Causes of damage can include cracking or splitting from thermal shock of sudden temperature changes during repeated heating and cooling cycles. Improper cleaning methods using harsh chemicals may also degrade protective coatings.

Symptoms of a faulty glass plate involve: 

• Cracks or chips exposing sharp edges presenting a hazard
• Denting or warping preventing level rotation inside the cavity
• Staining or clouding compromising visibility of cooking foods

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

This front trim grill restores the appliance's finished look and protects the lower vent area from debris. It's a direct-fit replacement that keeps the front of the unit looking clean and helps maintain proper airflow at the base. What it does:

• Covers and protects the lower front vent/opening from dust and large debris
• Restores damaged, cracked, loose or missing trim for a finished appearance
• Helps direct airflow at the appliance base for normal ventilation
• Secures to the cabinet with snap tabs or screws depending on model

• One replacement grill

• Disconnect power to the appliance before attempting any service
• Remove any retainers or screws holding the old grill; many grills snap into place
• Align tabs carefully and press or secure with screws until seated; avoid forcing to prevent damage
• Retain original fasteners if reinstalling

The Mounting Bracket is an OEM part for Frigidaire microwaves. This part securely attaches the microwave to the wall or cabinetry. This bracket is designed to ensure that your microwave is mounted safely and remains stable during operation, preventing any potential movement that could lead to damage or operational issues. 

Causes of a bad Mounting Bracket can include physical damage from improper installation or accidents, wear and tear over time that weakens the bracket's integrity, and corrosion due to exposure to moisture or kitchen vapors, which can compromise its strength and stability.

Symptoms of a bad Mounting Bracket include:

• The microwave tilting or sagging
• Unusual vibrations or noise during operation, indicating that the microwave is not securely fastened
• Visible damage or rust on the bracket itself, which could weaken its support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Mounting Kit is an OEM part for Frigidaire microwaves. It provides the necessary hardware to mount a built-in microwave securely above a cooktop or range. The mounting kit contains mounting brackets, and screws to facilitate a safe and sturdy installation. This kit does not include the installation instructions.

Causes of a bad mounting kit can include deterioration of mounting brackets or screws over time and repeated use, or if the original kit was missing components needed for a secure installation.

Symptoms of a bad or missing mounting kit include:

• The microwave become loose or detached from the wall
• Screws fall out or strips during installation
• Brackets bend or break over time
• Microwave is not level after installation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Keep your microwave's ventilation performing its best. This replacement air filter helps screen cooking vapors before the air is recirculated or exhausted, restoring proper airflow and helping maintain cleaner, more effective ventilation.

• Filters air drawn through the microwave's ventilation system during cooking
• Helps reduce cooking odors and airborne particles in the exhaust stream
• Supports proper airflow and fan performance for effective venting
• Replace when saturated, damaged, or visibly dirty; do not operate without required filters
• Common signs of a spent filter: persistent odors, weaker ventilation, or a discolored/brittle filter

• Disconnect power by unplugging the unit or switching off the circuit breaker before service
• Access the filter from the underside panel or top/front grille, per your model
• Note the old filter's orientation; install the new filter the same way and secure any tabs or screws
• Ensure all panels/grilles are reinstalled securely before restoring power

This replacement shield is a molded protective cover designed to guard internal appliance components from debris and accidental contact. It helps maintain reliable operation by keeping parts covered and reducing the chance of component damage. What it does:

• Protects electrical and mechanical parts from dust, food particles, and accidental contact
• Helps maintain proper airflow routing around nearby components
• Reduces risk of shorts or damage caused by loose objects entering the compartment
• Can address symptoms such as exposed components, intermittent contact, or foreign-object noise

• One replacement shield

• Always disconnect power before attempting any repairs to avoid shock or injury
• Remove the access panels or trim that cover the damaged shield; keep fasteners for reinstallation
• Install the replacement in the same orientation as the original; secure with the OEM fasteners
• If the original shield is cracked or mounting points are damaged, inspect surrounding components for related damage

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft