Parts for Frigidaire FGHB2868TF4: Cabinet Parts

Removes contaminants for clean, fresh-tasting water and ice. Replace every 6 months for optimal filtration. Confirm fit with your model number.

Replacement access panel cover for refrigerators. Shields internal components from dust and debris. Needed when original is cracked, broken, or missing.

Seals your freezer door to keep cold air in and warm air out. Replace when worn, cracked, or causing frost buildup. Verify fit with your model number.

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Spring component for bottom-mount refrigerators. Replace this part when the original is broken, stretched, worn, or missing to restore proper function.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

Refrigerator making loud buzzing or vibrating noises? This evaporator fan motor mount bushing cushions vibrations and secures the motor in place.

Seals the coil cover area to maintain proper airflow and prevent dust buildup. Replace if worn, cracked, or losing seal efficiency. Verify fit with your model.

Fix improper cooling and uneven temperatures in your refrigerator with this air tower assembly. Distributes cold air throughout the compartment.

Plastic cover that shields the evaporator coil and directs airflow in the freezer compartment. Replace if cracked, broken, or missing to prevent debris.

Refrigerator not cooling or freezer warm? A failed evaporator fan motor stops air circulation over coils. Easy DIY repair from inside freezer compartment.

Interior light stays on or won't turn on when door opens? This door-activated switch restores automatic on/off lighting. Easy 15-minute fix.

Light lens cover for refrigerator interior lighting. Replaces cracked, yellowed, or missing lens covers. Snaps into place over bulb compartment.

Replace your dim or flickering refrigerator interior LED light assembly for bright, clear visibility. Essential when light fails or flickers. Verify fit with your model number before ordering.

Rubberized seal creating airtight connections between ductwork and fans. Replace if air leaks cause uneven cooling or frost buildup. Confirm fit with model.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

Replacement screw fastener for securing panels, trim, and components inside your refrigerator. Needed when original screws are stripped or missing.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Secures your refrigerator to the floor or wall to prevent tipping. Replace if bracket is bent, broken, or missing to restore proper stability.

Metal hinge assembly connects refrigerator door to cabinet. Replace if hinge is cracked, broken, bent, or causing door misalignment and poor sealing.

Metal hinge assembly that connects refrigerator doors to the cabinet. Replace if hinge is cracked, broken, or worn causing door misalignment or sagging.

Protects cabinet corners from chips and moisture damage. Replace when trim is cracked, missing, or no longer seals properly. Verify fit with your model.

Replacement corner trim that covers the cabinet edge of your refrigerator. Restores a finished look to cracked, chipped, or missing corner pieces.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.

Replacement trim cover cap for your refrigerator. Conceals exposed openings and components for a neat appearance. Order when original is cracked or missing.

Trim cap that covers the upper door hinge assembly. Restores finished appearance and protects hinge area. Replace if cracked, broken, or missing.

Replaces worn or broken cabinet lid hinge to restore smooth opening and alignment. Install when lid sags or closes unevenly. Confirm fit with model number.

Plastic hinge cover that conceals the hinge mechanism on your refrigerator door. Replace if cracked, broken, or missing for a clean appearance.

Replace a cracked or missing upper hinge cover on your refrigerator door. This trim piece conceals hinge hardware for a clean, finished look.

Molded plastic trim piece that conceals the upper door hinge assembly. Replace if cracked, broken, or missing to restore a finished look.

Covers and protects the upper door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look.

Secures refrigerator grille or trim to cabinet, preventing rattles and gaps. Replace when broken or missing to restore proper panel alignment. Verify fit with your model number before ordering.

Left-hand gray upper hinge cover snaps over the top door hinge to conceal hardware and restore a finished look. Replace when cracked, broken, or missing.

Hex head screw secures refrigerator door hinges to the cabinet. Replace if missing, stripped, or lost during moves or repairs. 1/4-20 thread size.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Replacement screw for refrigerator panels, brackets, and covers. Secures interior and exterior components. Needed when original is missing, stripped, or corroded.

Fixes refrigerator not cooling, dispenser won't stop running, or unresponsive controls. Main control board regulates temperature and defrost cycles.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.

Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.

White front grille kickplate for bottom-mount refrigerators. Covers the lower front panel beneath the door. Replace if cracked, discolored, or missing.

Black front grille kickplate panel for refrigerators. Installs at the bottom base of your unit. Replace if cracked, broken, faded, or missing to restore appearance.

Grey plastic grille kickplate that covers the base of your refrigerator. Includes mounting clips. Replace if cracked, melted, broken, or missing.

Hex washer head screw for washers and laundry centers. Replaces missing, stripped, or damaged screws during repairs or component replacement.

Insulated cardboard cover assembly that installs on the rear bottom of your refrigerator. Replaces a cracked, torn, or missing original cover.

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Replacement outer housing cover for refrigerators. Shields internal components and restores exterior appearance. Needed when original is cracked or broken.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Refrigerator light not turning on or staying on? This light switch controls interior lighting when the door opens and closes. Easy 15-minute fix.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Refrigerator won't cool properly or runs constantly? The thermistor monitors temperature and signals the control board. Moderate DIY repair.

Molded plastic evaporator cover that protects the freezer coil assembly and directs airflow. Replace if cracked, broken, or missing for proper cooling.

Refrigerator cover panel that conceals internal components or provides finished appearance. Replace if cracked, discolored, broken, or missing.

Replace a cracked, broken, or missing cover on your refrigerator. This structural part installs to protect internal components and maintain appearance.

Keeps refrigerator air fresh by reducing odors and filtering unwanted smells. Replace every 6 months for optimal performance. Verify fit with your model.

Seals refrigerator door to maintain temperature and reduce energy loss. Replace if worn, torn, or compressed to restore cooling efficiency. Verify fit.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

Secures components to the cabinet frame for solid support and alignment. Replace this bracket if worn, bent, or broken to restore structural stability.

Directs cold air from the evaporator through your freezer compartment. Snaps into the back wall. Replace if cracked, warped, or missing to restore airflow.

Replacement sump cover for bottom-mount refrigerators. Installs under drawers to protect components. Needed when original is cracked, broken, or missing.

Mounting screw for washer and pedestal installation. Replaces lost, stripped, or corroded screws. Secures components and panels during assembly.

Wiring harness for bottom-mount refrigerators. Connects electrical components throughout the unit. Replace if wires are frayed, damaged, or corroded.

Replace a cracked or missing protective trim cover on your refrigerator. This cover shields internal components from dirt and restores a clean look.

Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

White button plug insert for refrigerator door handles and panels. Replaces cracked, broken, or missing plugs. Restores clean finished appearance.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Secures panels, brackets, and internal components in your refrigerator. Replace when the original fastener is missing, stripped, or corroded for proper fit.