Parts for Frigidaire FGHG2344MF7: 07 - Cabinet Parts

Filters contaminants from refrigerator water and ice. Replace every 6 months or when flow slows for clean, fresh-tasting water. Verify fit by model.

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

Replaces worn or damaged shaft support bushing in your refrigerator. Cushions rotating shafts to reduce friction and noise. Order a new bushing today.

Seals the coil cover area to maintain proper airflow and prevent dust buildup. Replace if worn, cracked, or losing seal efficiency. Verify fit with your model.

Plastic cover that shields the evaporator coil and directs airflow in the freezer compartment. Replace if cracked, broken, or missing to prevent debris.

Insulation for refrigerator air duct. Installs inside cabinet to maintain temperature efficiency. Replace if worn, torn, or missing insulation.

Fix SY EF error codes or warm refrigerator temperatures with this evaporator fan motor. Moderate DIY repair restores air circulation and cooling.

Fix a refrigerator light that won't turn on or off when the door opens or closes. This door-activated light switch is a simple 5-minute DIY repair.

LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.

Wiring harness for refrigerators. Connects electrical components inside the appliance. Replace if wires are frayed, damaged, or connections are loose.

Wiring harness for bottom-mount refrigerators. Connects electrical components inside the unit. Replace if wires are frayed, damaged, or corroded.

Refrigerator cover cap that installs on the exterior cabinet or internal components. Replace if cracked, broken, discolored, or missing to restore appearance.

Fix a refrigerator light that won't turn on, flickers, or has a loose bulb. This interior light socket secures the lamp and restores reliable lighting.

Fix intermittent refrigerator operation caused by worn or heat-damaged component sockets. This receptacle restores secure plug-in connections for reliable performance.

Replace your refrigerator door gasket seal to restore proper sealing and energy efficiency. Worn gaskets cause temperature loss and higher bills.

Support plate for refrigerator light socket assembly. Mounts inside the fresh food compartment. Replace if cracked, broken, or missing to secure socket.

Cover cap for bottom-mount refrigerators. Replaces cracked, broken, or missing covers. Installs on exterior or interior panels to restore appearance.

Genuine mounting screw secures panels, brackets, and covers inside your refrigerator. Replace missing, stripped, or corroded fasteners to restore secure fit.

Secures panels, brackets, and internal components in your refrigerator. Replace when the original fastener is missing, stripped, or corroded for proper fit.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Secures internal components to the refrigerator frame. Replace this mounting bracket if the original is bent, broken, or missing to restore alignment.

Washer for bottom-mount refrigerators. Replaces lost, damaged, or worn washers used to secure components. Essential for proper assembly and fit.

Plastic spacer that mounts between refrigerator door components to maintain proper alignment and spacing. Replace if cracked, broken, or missing.

Door spacer for bottom-mount refrigerators. Maintains proper spacing between door panels and cabinet. Replace if cracked, missing, or worn to prevent rubbing.

Corner trim kit for refrigerator installation. Replaces cracked, broken, or missing corner trim pieces. Cosmetic finishing component for cabinet fit.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.

Plastic hinge cover that conceals the upper hinge assembly on your refrigerator door. Replace if cracked, broken, or missing for a clean finish.

Plastic cover that shields the upper door hinge on your refrigerator. Replace if cracked, broken, or missing to restore a clean appearance.

Hex head screw secures refrigerator door hinges to the cabinet. Replace if missing, stripped, or lost during moves or repairs. 1/4-20 thread size.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Replacement screw for refrigerator panels, brackets, and covers. Secures interior and exterior components. Needed when original is missing, stripped, or corroded.

Fix unresponsive buttons or a control panel that won't register commands. This user interface board restores cycle selection and input. Moderate DIY repair.

Refrigerator door guide channel that helps align and support the door mechanism. Replace if cracked, broken, or worn to restore proper door alignment.

Secures panels, brackets, handles, and trim inside your refrigerator. Replace missing, stripped, or damaged screws to eliminate rattling and looseness.

Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.

Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.

Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.

Grey plastic grille kickplate that covers the base of your refrigerator. Includes mounting clips. Replace if cracked, melted, broken, or missing.

Small bearing insert that supports the refrigerator door stop mechanism. Replace when worn, cracked, or causing loose door alignment and excess play.

Insulated cardboard cover assembly that installs on the rear bottom of your refrigerator. Replaces a cracked, torn, or missing original cover.

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Molded plastic evaporator cover that protects the freezer coil assembly and directs airflow. Replace if cracked, broken, or missing for proper cooling.

Refrigerator cover panel that conceals internal components or provides finished appearance. Replace if cracked, discolored, broken, or missing.

Clear light shield lens protects interior refrigerator bulb from moisture and impact while diffusing light. Replace if cracked or tabs broken. Confirm fit.

Replacement light lens cover for your refrigerator. Replace when cracked, yellowed, or damaged to restore proper lighting. Verify fit with your model number.

Top air duct for bottom-mount refrigerators. Guides airflow from freezer to fresh food compartment. Replace if cracked, broken, or missing for proper fit.

Plastic cover that protects and conceals electrical wiring connections in your refrigerator. Replace if cracked, broken, or missing to restore appearance.

Replacement screw for securing refrigerator panels, brackets, and trim. Restores proper fit and reduces rattling from loose or missing fasteners.

Fix a fridge that's freezing food or not cooling properly. This air damper controls cold airflow between compartments. Moderate DIY repair for most models.

Seals the air damper opening to maintain proper airflow between compartments. Replace if torn or compressed to fix uneven cooling and drafts.

Seals refrigerator door to maintain temperature and reduce energy loss. Replace if worn, torn, or compressed to restore cooling efficiency. Verify fit.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.

Directs cold air from the evaporator through your freezer compartment. Snaps into the back wall. Replace if cracked, warped, or missing to restore airflow.

Replacement sump cover for bottom-mount refrigerators. Installs under drawers to protect components. Needed when original is cracked, broken, or missing.

Mounting screw for washer and pedestal installation. Replaces lost, stripped, or corroded screws. Secures components and panels during assembly.

Foam insulation installs in refrigerator cabinet walls and interior surfaces. Replace if cracked, compressed, torn, or missing to restore efficiency.

Foam sleeve insulation that wraps around the refrigerator air duct. Replace worn, torn, or missing insulation to reduce condensation and moisture buildup.

Replacement wiring harness for refrigerators. Connects electrical components throughout the unit. Replace if wires are frayed, damaged, or connectors broken.

White button plug insert for refrigerator door handles and panels. Replaces cracked, broken, or missing plugs. Restores clean finished appearance.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.