Need Help?
Call
Dryer won't advance cycles or shuts off at wrong times? A faulty timer is usually the cause. This control restores proper cycle timing and progression.
Appliancepartspros supplied the appropriate materials and the installation was quick and easy. My GE gas dryer works like new again. Read more
Washer stops mid-spin or shows F6E1 error? The motor control board regulates drive motor speed and direction. Most DIYers replace it in 15-30 minutes.
On-line chat with AppliancePartsPros told me the error code was was for motor speed and they sent me a .pdf file on what to do to T/S it. Following the sheet I checked motor and Tack resistance and wiring - all OK, so I ordered a Motor Controller Ckt board assy. It arrived in 24 hours, during that time i watched the replacement videos and removed the old part. Upon receiving the new part I installed it (15 min), tested the washer (it worked), then put all the panels back on, pushed the washer... Read more
Fix F11 error codes, non-working clock displays, or temperature control issues. This electronic control board restores oven function and display accuracy.
Replaced the control board and got rid of the roaches. Read more
Fixes refrigerator not cooling, dispenser won't stop running, or unresponsive controls. Main control board regulates temperature and defrost cycles.
Fix a refrigerator that stopped cooling overnight with this inverter control board. Moderately easy DIY repair with just two harness connectors to attach.
This is a Whirlpool range control board. It manages and monitors temperatures for the range and features a digital display and user interface buttons. The control board can short out due to power surge or exposure to excessive heat. For example, if the oven's self clean function is run too long or too frequently, parts of the control board could melt or otherwise malfunction.Before installing this part, be sure to cut power to the appliance and allow it to cool completely. The stove may need to be pulled away from the wall to access the screws holding the control panel in place. Remove the screws from each side of the control panel to gain access to the old control board. Disconnect any wire harnesses connected to it and remove any screws mounting it in place before installing the new part.This is a genuine OEM part compatible with ranges manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product is just the panel and contains no additional parts or hardware.
After trouble shooting, ordered electronic board from appliance parts pros.com I received it the next day and installed it. works find. Read more
Fix a dryer that won't advance cycles or turn on due to a worn timer shaft. This plastic-shaft timer restores knob grip and timing control. 10-minute DIY fix.
Checked for the problem replaces that part along with some parts as preventive maint app made it easy parts for perfect and were shipped very fast app is the only place to buy parts great place Read more
Won't start, spin light blinking, or won't stop spinning? This control board manages cycles and settings. Common DIY repair, typically installed in minutes.
Remove the 2 screws that hold on the front cover just above the washer, the control board is in front of you. Remove the 2 small screws that secure the board, they are star screws, very small ones, do not drop them, for they will fall into the washer tub. Take a picture of the wiring harness, press the 2 tabs on each side of the board, left and right side, the board will pop out. replace the wiring harness, wiring harness has tabs that hold them in place. Also, check the magnetic lid switch,... Read more
Oven not heating or display not responding? This electronic control board manages temperature, timing, and keypad functions. Moderate DIY repair.
My 15 year old son and I examined the new parts and made a plan for how we were going to take the front off of the oven. Turns out it was fairly simple. We removed the knobs, the knob shrouds, two philip screws on the side of the head and about 6, 6mm hex sheet screws. Voila! It came apart. We carefully looked at how the old parts were assembled and simply reversed the assembly with the new parts. Since one of our parts was the entire front head, it went together quickly and it was a perfect... Read more
This is a high-quality refrigerator power supply board. It's an internal component that is made to control the refrigerator functions. This part is made with small precision parts to help with timing defrost and cooling cycles. This part can be damaged or malfunction and stop operating correctly. This may prevent the refrigerator from running, cause strange sounds, or cause the refrigerator to run at the wrong temperature.If this part is damaged, it will need to be replaced. Before replacing the power supply board, make sure the refrigerator is unplugged from the wall. The process will require a flathead screwdriver and a nut driver. Use the tools to unthread the screws on the access cover. Depress the retaining tab to remove the inner cover and disconnect the wires. Press the tab to release the power supply board and snap in the new component. Make sure the wires are properly connected and reassemble.This genuine OEM replacement part is sold on an individual basis. It is directly acquired from the manufacturer and is designed to be compatible with refrigerators made by Kenmore, Whirlpool, Maytag, and KitchenAid.
Oven not heating or display blank? This control board manages clock, timer, and heating functions. Restores temperature control and keypad responsiveness.
Refrigerator won't respond or shows error codes? This power control board regulates operations and coordinates key components. DIY-friendly repair in 10 minutes.
DIY the part worked fine Read more
If your mixer won't start smoothly or speed settings aren't accurate, this speed control board regulates motor power. DIY-friendly replacement.
Fixed with your replacement Read more
Fix a refrigerator that won't cool, clicks repeatedly, or has a blank display by replacing the main electronic control board. Moderately difficult repair.
I replaced the ice door motor with new hardware, circuit board on touch panel display then the main ECB on top in the doghouse. It finally came to life and started working! No issues with the front panel and everything works as it did! Read more
Fix a dishwasher that won't start, stops mid-cycle, or has dim lights with a new electronic control board. Moderate DIY repair, 45-60 minutes.
Replaced control board. This project took about 45 minutes to complete. It helps if you have two people because at one point you need to squeeze 4 plastic clips. Also helps when switching wire from one board to the other. I am 71 years old and this was a very easy task. Read more
Refrigerator not cooling or door alarm won't stop? The control board regulates cooling cycles. Moderate DIY difficulty—disconnect power and match wires.
Purchased a new Control Board, as well as a new Thermister. Thermister was not absolutely necessary and could have been tested but it was simple enough to just replace during the control board replacement. Since it was a good time to replace the carbon air filter, I included that in the order too. Ordering the parts was very easy and completing the order the same. Parts arrived within a couple of days, which is good to know if you are depending on an appliance working. Impressed that... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.