Need Help?
Call or text
Fix unresponsive oven controls or blank displays with a new electronic control board. Restores temperature settings and cycle functions on gas ranges.
Fix a dryer that won't advance cycles or turn on due to a worn timer shaft. This plastic-shaft timer restores knob grip and timing control. 10-minute DIY fix.
Checked for the problem replaces that part along with some parts as preventive maint app made it easy parts for perfect and were shipped very fast app is the only place to buy parts great place Read more
If your dryer won't shut off or cycles won't advance, the timer may have failed. This control manages drying cycles and run time. DIY repair in 20 minutes.
With a Phillips screw driver, on the back of the control panel there was about 6 or 7 screws to undo, to take the cover off and 2 screws holding the timer in place. Just undone those, took out old timer, made sure I took wires from old timer one at a time, and, put on new timer. Put everything back, although I had to find a couple of very small washers to make the timer fit tight, in the 2 holes it came out of. Luckily I had those or would of been a very loose timer. Very easy to do. Read more
This OEM replacement part is an oven control board. The oven control board is the primary computer circuit board that controls the main functions of the oven. These functions include turning the oven on as well as adjusting and maintaining the temperature of the oven. Luckily, replacing a control board is a simple process.To replace the board, first, make sure the oven is unplugged. Gain access to the back of the oven and remove the upper back panel. Once the panel is removed, locate the old control board. Take note of the orientation of the wires by taking a photo with a phone camera. Disconnect the wire harness and any individual wires that are attached to the old board. Re-secure the wires into their correct positions. Snap the new board back in place and reinstall the upper back panel.This genuine replacement control board is compatible with Frigidaire Electrolux, Gibson, Kelvinator, and Westinghouse brand ovens.
Ohm'ed out the heat elements and both were good. Outlet had 240 volts. I had reviewed several items on the internet. Everything pointed to the control board. Ordered the part on a Sunday night using standard shipping and received it Tuesday. Replaced and tested. Over is working again. Read more
Fix F11 error codes, non-working clock displays, or temperature control issues. This electronic control board restores oven function and display accuracy.
Replaced the control board and got rid of the roaches. Read more
Fix unresponsive buttons or blank displays with this user interface control board. Restores keypad function and display readings on your laundry center.
Fix a refrigerator that stopped cooling overnight with this inverter control board. Moderately easy DIY repair with just two harness connectors to attach.
The Dispenser Control Board is an OEM replacement part for Frigidaire refrigerators. This component manages the operation of the ice and water dispenser, controlling functions like dispensing ice, water, and the corresponding display settings. It ensures that the dispenser operates correctly by communicating with other components, such as the ice maker and water valve.
Causes of a bad dispenser control board can include electrical malfunctions, power surges, or wear from regular use, which can affect the board’s ability to send signals to the dispenser components.
Symptoms of a bad dispenser control board include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Fixes blank display, unresponsive controls, or incorrect oven temperatures. This control board regulates all oven functions including timers and cooking modes.
Fix a dispenser that won't shut off or stops responding. This control module manages water and ice dispensing functions. DIY-friendly repair.
Called and asked what was wrong, your helpful people told me what I needed and ordered it right away. Watched the you tube video. Gathered my son and we proceeded to take on the job.( I handed him the screwdriver and held things in place.) Within minutes we had the job done. Plugged it back in and worked very well, 3 days later still no problems, happy camper! Read more
Refrigerator not cooling or door alarm won't stop? The control board regulates cooling cycles. Moderate DIY difficulty—disconnect power and match wires.
Purchased a new Control Board, as well as a new Thermister. Thermister was not absolutely necessary and could have been tested but it was simple enough to just replace during the control board replacement. Since it was a good time to replace the carbon air filter, I included that in the order too. Ordering the parts was very easy and completing the order the same. Parts arrived within a couple of days, which is good to know if you are depending on an appliance working. Impressed that... Read more
Fix F11, F14, or E15 error codes and unresponsive controls. This electronic control board restores oven temperature regulation and display functions.
My induction slide-in range was getting an E15 error code. First thing to do is look in the service manual, which should be in a plastic pocket at the back of the oven. I eventually did do that, but first I googled it. First, power cycle the stove, i.e. turn off the breaker, wait a minute, then turn it back on. That fixed it for a few months, but then it started doing it again, except now it only took a minute for the oven to beep E15 after turning the breaker back on. The service manual... Read more
Fix temperature fluctuations, defrost issues, or error codes with a new main control board. Controls cooling, defrost cycles, and display functions.
Ordered the condenser fan motor and control board for my Samsung refrigerator, used the videos provided and installed the parts myself. My refrigerator is now back in service. Read more
Fix unresponsive controls, erratic cycles, or error codes with this dishwasher electronic control board. Restores proper timing and operation.
Dryer won't start, advance through cycles, or shut off? A faulty timer is often the cause. This mechanical control selects and advances drying programs.
But the new part and installed it. It was super easy. Read more
If your dryer control knob slips or won't turn the timer properly, this plastic timer shaft restores secure engagement between knob and timer mechanism.