Parts for Jenn-Air JGRP648HL01: Cooktop, Burner, And Grill Parts

This side compartment is a replacement refrigerator door shelf that restores secure storage on the door and keeps bottles, jars and other items organized. It fits into a compatible refrigerator door to replace a cracked, broken or missing shelf. What it does:

• Provides a stable shelf on the refrigerator door for bottles, jars and small containers
• Replaces a cracked, broken or missing door shelf that allows items to tip or fall
• Restores proper spacing and organization inside the door storage area
• Helps keep stored items contained when opening and closing the door

• One side compartment

• High-level, snap-in installation—inspect mounting pegs or clips for damage before installing
• Power does not usually need to be disconnected, but remove all items from the shelf and wear gloves to avoid sharp edges
• If mounting clips are damaged, replace clips or the entire assembly to ensure a secure fit
• Test door operation with the shelf loaded to secure installation

This side compartment is a direct-fit door bin that restores storage on the refrigerator door, keeping bottles and small items secure and organized. Durable molded plastic replaces cracked or missing bins for reliable everyday use. What it does:

• Replaces a cracked, broken or missing door bin to restore storage capacity and organization
• Holds bottles, condiments and small containers along the inside of the refrigerator door
• Prevents items from falling when the door opens and closes
• Matches the factory shelf design for correct fit and alignment

• High-level snap-in/screw-in replacement; remove existing bin then install new bin until it seats
• Disconnect power only if removal requires working near electrical components; otherwise power disconnection is not typically needed
• Handle carefully to avoid damage to adjacent door liners or gaskets

Weak or uneven flame? This burner orifice meters gas flow for proper flame size and consistent heat. Restores reliable ignition on gas ranges and cooktops.

Burner producing weak, uneven, or no flame? This natural gas orifice meters precise gas flow to restore proper flame size and consistent heating.

If your gas range oven won't ignite or has weak sparks, this igniter wire connects the igniter to the safety valve for reliable spark transfer.

Insulating pad that protects cooktop surface under burner grates. Replace if worn, damaged, or causing scratches. Confirm fit with your model number.

Trim ring that mounts behind control knobs on gas cooktops and ranges. Replace if cracked, loose, or missing to restore a finished look and proper spacing.

Replace your gas cooktop burner cap when flames are uneven, discolored, or won't ignite properly. Covers the burner head for even heat distribution.

Uneven flames or weak heat from your gas burner? This surface burner head restores proper gas flow and even heating. Simple DIY swap in under 15 minutes.

Directs and shapes gas flame for even heating on your cooktop. Replace if damaged, warped, or flame pattern is uneven. Verify fit with your model number.

Plastic retainer clip that secures panels, trim, or wiring in your gas range. Replace if clip is cracked, broken, or missing to restore proper fit.

Stainless-steel mode selector knob installs on your gas range control panel. Replace your cracked, broken, or faded knob to restore cooking mode selection.

This burner box assembly houses and protects the range's burner components, helping direct heat and support reliable burner operation. It replaces a damaged or corroded box to restore proper burner alignment and safe operation. What it does

• Supports and positions the surface/broil burner so the flame or heating element operates correctly.
• Shields underlying wiring, igniters, and gas lines from spills and debris.
• Helps direct heat away from surrounding cabinetry and internal components.
• Commonly replaced when the box is warped, rusted, cracked, or causing burner misalignment or ignition problems.

• One burner box assembly

• Turn off electricity to the appliance at the breaker; for gas models, shut off the gas supply before starting.
• Use basic hand tools; keep track of mounting screws and any small brackets.
• Watch for sharp sheet-metal edges and wear cut-resistant gloves.
• After installation, restore power/gas and test burners for correct operation and any gas leaks.

Replace your damaged or worn gas range cooktop surface. This assembly installs on top of your range and is needed when the existing cooktop is cracked or chipped.

Replace your damaged or worn gas range cooktop surface. This assembly includes the cooking surface where burners install. Ideal for cracked, stained, or broken cooktops needing renewal.

Replace your gas range's worn, cracked, or missing surface burner control knob. This stainless steel dual-function knob installs on the control panel.

Decorative trim panel for gas range or cooktop. Replaces cracked, chipped, or discolored trim pieces along the top edge. Restores appearance.

Decorative bezel that fits around gas range control knobs. Replace this trim ring if cracked, discolored, or missing to restore your cooktop's appearance.

Decorative trim panel for gas range cooktops. Replaces cracked, chipped, or worn trim pieces. Installs around burner area to restore clean appearance.

Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.

Replacement 8-32 x 5/8 mounting screw for securing internal panels, brackets, and components in stand mixers. Restores tight fit if original is missing or stripped.

Fix unresponsive or sticky control panel buttons on your range. This push button restores reliable input for selecting settings and starting cycles.

Fix unresponsive or stuck range buttons with this control panel push button. Restores tactile feedback so cycles register correctly. Simple swap repair.

Fix unresponsive controls, blank displays, or cycles that won't start with a new main electronic control board for your refrigerator or freezer.

Replacement mounting screw for refrigerators, ranges, and other appliances. Replaces lost, stripped, or damaged screws during repairs or maintenance.

Replace a cracked, broken, or missing control knob on your gas range. This knob installs on the control panel and restores grip for turning and selecting settings.

This replacement control knob restores user control of temperature and burner/oven settings on compatible ranges and ovens. It provides a secure, easy-to-grip interface for selecting heat levels and functions. What it does:

• Replaces a cracked, stripped, missing, or loose control knob so the selector stays engaged with the control shaft
• Lets you accurately set burner or oven temperatures and function positions
• Prevents slipping or accidental changes caused by worn knobs
• Matches the original fit and rotation style for straightforward operation

• Disconnect power to the appliance (unplug or switch off breaker) before servicing
• Align the knob with the control shaft and push firmly into place; do not force on misaligned splines
• Inspect the control shaft for damage; a damaged shaft may require additional parts

Secures cooktop panels, burner components, and trim pieces. Replace missing, stripped, or damaged screws to eliminate rattles and keep parts aligned.

Fix a washer with no beeps or cycle alerts. This speaker restores button press sounds and end-of-cycle signals. Simple repair, typically 15-30 minutes.