Craftsman Snow Removal Equipment Parts

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.

This is a genuine throttle return spring used on select small engines. The throttle return spring is part of the throttle system. It is attached to the throttle cable and the throttle body or carburetor, and is responsible for pushing the throttle closed when the gas is released and opening the throttle when the throttle trigger is engaged. If the spring is faulty, the throttle will not be able to open and close properly. This can affect the machine's ability to operate and even prevent it from operating at all if the throttle remains closed and no power can get through. A replacement should be done as soon as possible to prevent further damage to the engine. This genuine OEM throttle return spring is manufactured by Tecumseh, and compatible with machines from Toro, Husqvarna, MTD, Lawn Boy, and Tecumseh. There are over 150 models that can use this replacement part. It is made of durable metal and sold as an individual part. This throttle return spring is a simple replacement that should only take a few minutes. Be sure to use care when replacing the spring because it can be susceptible to damage under excessive pressure or strain.

This dampening spring float is for use in lawn and garden carburetors. It is a vital component that prevents flooding in the carburetor, particularly if the equipment is going over rough terrain or is otherwise unstable.When replacing a missing or damaged spring float, be sure to refer to the manual and diagrams for the carburetor it is being installed in. Location and application of this hardware will vary based on the model of the carburetor.This dampening spring float is a genuine OEM part sourced directly from the manufacturer. It is sold individually. The manufacturer is Tecumseh. This dampening spring float is compatible with products by the following brands: Tecumseh, Craftsman, Toro, Cub Cadet, Lawn Boy, and Husqvarna.

This is a main nozzle tube replacement for use with a range of different types of outdoor equipment and small engines. Another name for the main nozzle tube is the fuel jet. The fuel will turn into a vapor and then travel through the main nozzle in a vacuum process. This draws the air into the Venturi pipe. The main nozzle tube is made from plastic, and it can eventually start to break down and wear away. When this happens, it will no longer be efficient. Owners might find that the engine is not running smoothly, or that it is difficult to start the engine. Replacing this element of the system could be what is needed. This is a genuine OEM main nozzle tube replacement. It is sold individually and works for various models of lawn mower, snowblower, tiller, pressure washer, generator, log splitter, wood chipper, and other small engines. Compatible brands include MTD, Toro, Cub Cadet, Lawn-Boy, Craftsman, and Briggs & Stratton. Owners should always ensure they are getting the correct replacement for their make and model.

This part includes the primer bulb in addition to the carburetor itself. A carburetor mixes fuel and air before delivering it to the engine to produce power. The gaskets form a seal that prevents too much air from getting mixed with the gas. A new carburetor may be needed if there is an air or gas leak. When there's a slight air leak, the operator may notice engine roughness when it's at idle. A larger air leak will cause the engine to vibrate, misfire, or hesitate under acceleration.It's important to let the engine cool and to drain the gas tank before beginning a replacement of the carburetor. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This carburetor is used on engines and snowblowers manufactured by Tecumseh, Husqvarna, and Toro.

This is a genuine replacement flywheel nut that comes from the manufacturer Tecumseh. Nuts are used in various applications in a range of different types of machines. This flywheel nut is made from metal and is used to fasten the engine's flywheel to the crankshaft assembly. It helps to ensure that the connection is tight and that it does not start to come loose during operation. Nuts are a commonly lost part when making repairs on a machine or even during routine maintenance. The flywheel nut could also become corroded or otherwise damaged over years of use. If this happens, owners will want to be sure to replace the nut as soon as possible. Replacement for the flywheel nut tends to be fast and simple. This is an authentic OEM flywheel nut that is sold individually. The nut is a common part and can be used on many different machines. These include lawn mowers, snowblowers, generators, log splitter, wood chippers, pressure washers, generators, tillers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

The screw is used on various parts of lawn and garden equipment for various purposes. It is used to help fasten different pieces to one another. The screws ensure the machine is working properly, and it can help to reduce vibrations. The screws in the equipment may need to be replaced for any number of reasons. In some cases, they might have developed issues with the threads and no longer hold properly. They could have become corroded or they could have been lost when working on the engine. When there is an issue with the screw, it should be replaced right away. The authentic replacement screws are sold individually. They can be used with lawn mowers, snowblowers, log splitters, wood chippers, tillers, pressure washers, generators, and other small engines. The compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity. When buying screws, owners need to get the correct size for their needs. It may be a good idea to have several extra screws on hand.