Parts for Husqvarna 125E-CANADA: Cylinder / Crankshaft / Crankcase Parts

An air filter blocks tiny particles from entering and harming the engine. Over time, it will accumulate dirt and dust. If it is too worn-down, it will no longer be an effective barrier. Small debris may make its way into the engine and cause clogging. It can impede proper airflow. Replacing an air filter is a relatively quick and straightforward maintenance project. Let the device cool first. Then, loosen or remove the air filter cover. Take out the failed filter and install the replacement. Make sure to align it to the housing. Return the air filter cover to its original position. This part will fit several trimmer models from brands like Husqvarna, Poulan, and Craftsman. It has the same shape and cut as the trimmer’s original filter. This replacement does not come with the airbox cover. One genuine Husqvarna airbox filter per order is included, sold individually.

This is a replacement purge bulb. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective purge bulb on various models of outdoor power equipment. The purge bulb purges air from the carburetor and draws in fuel from the fuel tank to allow the engine to start. Over time, the purge bulb can crack or become brittle, requiring replacement. Proper tools are required to replace this part and work gloves are advised. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this purge bulb, the appropriate owner's manual and included diagrams should be referenced. As an authentic replacement part, this purge bulb is suitable for use on several different models of small engine power equipment such as string trimmers, leaf blowers, and edgers manufactured by Husqvarna, Craftsman, WeedEater, and Poulan. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This high quality choke lever is used on string trimmers and edgers from multiple manufacturers. The plastic choke lever actuates the choke valve which creates a limit to the amount of air that can enter the engine when the equipment is cold started. If the choke lever has been damaged or is broken, it may create problems with starting the tool. If this is the case, the choke lever will need to be replaced.This is a simple replacement project that requires only a screwdriver and a pair of work gloves. Before starting, make sure the tool is turned off and the spark plug wire has been removed. Place the tool on a flat surface and take out the choke lever. The broken choke lever can be removed using the screwdriver. The new replacement choke lever can be installed before tightening the screws and using the equipment again.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The choke lever is made for use with edgers and string trimmers manufactured by Craftsman, Husqvarna, and Poulan.

This part is a replacement carburetor adapter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective or broken carburetor adapter in various models of line trimmers.The carburetor adapter is found between the engine cylinder and the carburetor itself. It's critical for proper equipment functionality and thus will need to be replaced if rendered faulty in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this carburetor adapter, the appropriate owner's manual and equipment diagrams should be referred to. This carburetor adapter is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with line trimmer models that have been manufactured by Husqvarna, Poulan, and other brands.

This rewind spring is a genuine Husqvarna part, sold individually. This rewind spring can be used as a replacement part in a string trimmer or an edger. The rewind spring maintains the placement of the pulley in the pull start assembly, allowing the rope to power the appliance.The rewind spring could be dented, punctured, warped, eroded, cracked, chipped, or otherwise damaged to the point of reduced functionality or negated functionality, in which case the rewind spring should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This rewind spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

This fuel line kit is a part used in gasoline-powered edgers and trimmers. It delivers fuel from the gasoline tank to the carburetor where it is mixed with air that has come through the air filter. The mix flows into the combustion chamber where it is ignited to turn the driveshaft of the tool. As an added feature, this fuel line kit also has another line to feed excess fuel back into the gas tank. Extra, unneeded fuel sometimes flows into the carburetor when the engine is cold and users are trying to prime the engine. Although durable and intended to last, this fuel line is subject to weathering over the course of several years, especially when subjected to temperature extremes. A broken or fractured fuel line will leak gasoline, resulting in an extremely dangerous situation. Leaking fuel lines must be replaced immediately. This component is easily located, situated between the fuel tank and the carburetor. It is easily disconnected and replaced. When choosing a new fuel line kit, make sure to choose a part like this one, which is a genuine OEM certified part. This fuel line kit is compatible with Jonsered and Husqvarna equipment.

Here is an authentic fuel cap assembly that is a replacement for the cap that comes on many gas-powered lawn and garden tools. The cap provides protection and security for the fuel tank opening, so no dirt or debris gets into the fuel. This fuel cap assembly features a retainer, which will keep the cap attached to the tank when refueling. The retainer ensures that the cap does not become lost or fall to the ground. Over time, there could be many issues with the current fuel cap on the machine. It might no longer provide a tight seal. It might no longer have a retainer, or it could have cracked due to age or an accident. Regardless, it is a good idea for owners to get a new fuel cap assembly to ensure the integrity of their fuel. No tools are needed for adding the new cap to the machine. This genuine OEM replacement fuel cap assembly is sold individually. The assembly will work as a replacement for more than 50 machines including edgers, string trimmers, brush cutters, and leaf blowers. It is compatible with models from Husqvarna and Craftsman.

This replacement screw is OEM and has been directly sourced from the manufacturer. The screw is used in many machines, including lawnmowers, tractors, tillers, and other lawn and garden equipment.These screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to the mower and cause other parts to need replacement. Before checking the screws, make sure the mower has cooled off enough to touch. Letting the mower cool for a couple of hours is best to avoid burns. The screws can be tightened with a screwdriver. The screw is a genuine OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, and Jonsered machines.

This replacement part is a starter handle and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This starter handle aids the user in starting and shutting down the lawn mower safely. A new starter handle might be needed if the current one is damaged or broken in anyway. It is easy to replace this part. If the user is unable to start or shut down the appliance it might be faulty. Be sure to reference the owner's manual for detailed instructions on this replacement. Always be sure the engine is powered down before attempting to replace this part. This part is sold individually. It is also sourced directly from the manufacturer and is intended for different types of lawn mowers. This is also a genuine OEM replacement part.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or stripped screw in outdoor power equipment. Screws are a standard piece of equipment hardware with different uses. They help to secure parts of the equipment together properly. If a screw becomes corroded, stripped, misplaced, or is otherwise defective, then it should be replaced. Wear work gloves and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This is a muffler guard kit that is used on many kinds of lawn and garden equipment from Husqvarna. The guard is located on top of the muffler on the tool. It is designed to protect the muffler from damage. It also protects the user of the tool from excess heat that comes from the muffler. The muffler guard kit is made of durable plastic but can become damaged, broken, or lost. If this occurs, it will need to be replaced to prevent damage to the tool or injury to the user.When replacing the muffler guard kit, a pair of work gloves and a T25 Torx driver are needed. Take the outdoor lawn equipment and turn it off before moving it to a level surface. Access the spark plug and disconnect the wire to prevent the engine from turning on. Use the driver to remove the old muffler guard and replace it with the new component.The muffler guard kit is designed to be compatible with edgers, trimmers, and brush cutters manufactured by Husqvarna. The component is sold as an individual part. It is an authentic OEM replacement part that is directly sourced from the manufacturer.

This is an authentic OEM replacement ignition module built specifically for Husqvarna lawn appliances. An ignition module, also known as an armature-magneto, is an essential part of a combustion engine's ignition. The ignition module creates pulses of high voltage electricity that the spark plug uses to generate a charge and start the ignition. Without a functional ignition module, the spark plugs and ignition will not engage. The most common reason for an ignition module to break is if the spark plugs have gone bad or are missing from the ignition. The charge generated by an ignition module is quite high, so if the spark plugs are not in place to receive the charge, the high voltage can fry and melt the module. If the spark plugs are not receiving a spark but can carry a charge, the odds are that the ignition module has been fried and will need to be replaced. To make this repair, use a wrench set and screwdriver. Although this high-quality replacement part is designed specifically for Husqvarna appliances, it may also work with some Jonsered appliances, too. It comes sourced from the original manufacturer and does not include any additional hardware.

This replacement part is a flywheel. This is a genuine replacement part made by Husqvarna. This part is a heavy wheel that is attached to the motor in the engine. The flywheel regulates the speed of the machine and stores excess energy during use. A new flywheel might be needed if the current one is visibly damaged or no longer spinning. If the engine seems to be working intermittently, it might be a problem with the flywheel. Be sure the engine is powered off during this repair as the spinning mechanisms can cause injury if precautions are not taken. Refer to the owner's manual for more information about how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.

This is a genuine replacement air box cover. It fits over the air box housing and helps to prevent dirt and debris from entering, while also preventing the air filter from becoming wet in the case of rain or falling out during use. The air filter is essential for ensuring clean air for combustion within the engine. The air box cover is made of durable plastic. However, over time, plastic components can become brittle with exposure to high heat and harsh sunlight, leading to cracks and damage. The air box cover can also be damaged if the machine is dropped or through contact with hard surfaces. Replacing the air box cover is a simple process. A plastic knob holds the cover to the base. Simply twist and remove the knob, and then remove the damaged air box cover. Replace it with the new cover and put the knob back in place. This replacement air box cover fits several Husqvarna edgers, brush cutters, and trimmers. Note that this is a genuine OEM part and is sold individually.

This is an air cleaner knob that is used on various types of lawn and garden equipment. It is made to ensure the air filter cover is kept secure at all times. The part is made up of a threaded metal shaft and a plastic knob that can be screwed and unscrewed to replace the air filter. Through use and time, the air cleaner knob can become loose, damaged, or broken and will need to be replaced. Inspect the air cleaner knob visually to see if it is missing, damaged, or otherwise malfunctioning. If it is, a replacement is needed. This is an easy part to replace since it screws into the lawn and garden tool. Take the old air cleaner knob and unscrew it from the tool. If the knob is stuck, pliers or a hammer can be used to remove it so the new part can be installed.This replacement air cleaner knob is a genuine OEM component that is sourced directly from the manufacturer. It is sold as an individual part. The knob is compatible with string trimmers, leaf blowers, brush cutters, and edgers made by Craftsman and Husqvarna.