Parts for Weedeater GHT225LE TYPE 3: Cylinder / Crankshaft / Crankcase Parts

Tapping screw for outdoor power equipment. Secures various components in chainsaws, trimmers, blowers, and hedge trimmers. Replace if missing or stripped.

Engine gasket kit seals your hedge trimmer's engine to prevent damage. Replace if you see smoke from exhaust or oil leaks. Verify fit with your model.

Retaining ring fastener for brush cutters and trimmers. Holds components securely together. Replace if cracked, worn, or missing for proper assembly.

Heavy metal flywheel assembly connects to the rotating shaft to regulate power delivery from the motor. Replace if cracked, damaged, or worn from use.

Flat washer for trimmers, blowers, and hedge trimmers. Replaces worn, missing, or damaged washers. Essential hardware for secure assembly and fit.

Replace a broken or cracked starter handle that won't recoil or pull smoothly. This handle restores easy pull-starting on your trimmer in minutes.

Engine won't start or rope pulls out completely? This starter rope kit wraps around the recoil pulley to engage the engine. Simple DIY fix, 3 feet long.

Rubber grommet for line trimmers and outdoor power equipment. Replaces cracked, worn, or missing grommets that provide vibration dampening and protection.

Tapping screw for outdoor power equipment. Secures various components in chainsaws, trimmers, blowers, and hedge trimmers. Replace if missing or stripped.

Starter rope won't retract? This recoil spring tensions the starter pulley to retract the pull cord. Durable metal construction. DIY-friendly repair.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

Crankshaft outer bearing creates a flexible joint for moving components. Replace when you notice excessive vibration or noise during operation. Verify fit with your equipment's model number before ordering.

Seals the crankcase opening to prevent oil leaks around the crankshaft. Replace if you notice oil seepage or grinding noises. Confirm fit with model.

Bearing facilitates smooth rotation in outdoor power equipment. Replace when you notice grinding noise, vibration, or rough operation. Verify fit.

Replacement mounting screw for outdoor power equipment. Secures various components and reduces vibration. Order when screws are stripped, lost, or damaged.

Engine gasket kit seals your hedge trimmer's engine to prevent damage. Replace if you see smoke from exhaust or oil leaks. Verify fit with your model.

Replacement piston kit for gas trimmers, blowers, and handheld equipment engines. Includes piston and cylinder components. Needed when worn or damaged.

If your trimmer won't start or has lost power, a worn connecting rod assembly with failed bearings may be the cause. Connects crankshaft to piston.

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.

Engine gasket kit seals your hedge trimmer's engine to prevent damage. Replace if you see smoke from exhaust or oil leaks. Verify fit with your model.

Carburetor adapter for gas line trimmers and leaf blowers. Connects the carburetor to the engine intake. Replace if cracked, broken, or deteriorated.

This replacement screw is intended for use on a variety of lawn and garden tools to attach components. It is a genuine OEM part sourced directly from the manufacturer. It is used to attached the trimmer head to the shaft in weed eaters and in many other applications on other tools. Overuse and normal wear and tear can cause damage to the screw. The screw can also become stripped when it is over-tightened or bent from contact with heavy debris. The screw will need to be replaced if this happens. Routinely inspecting equipment will help reveal broken or missing screws that need to be replaced or tightened. This screw is a star-slotted screw that requires a Torx screwdriver to remove it from the machinery. If the screw is in a tight-fitting area, an extension socket with a Torx bit can be used to remove the screw and to install a new one. When replacing a screw, check the remaining screws for damage and tighten any that are loose. This screw is a silver-colored, heavy-duty metal screw sold individually. It is compatible with trimmers, leaf blowers, leaf vacuums, hedge trimmers, and other equipment manufactured by Craftsman, Weed Eater, Poulan, and Husqvarna.

Carburetor for hedge trimmers mixes air and fuel before sending to the engine. Replace if cracked, clogged, damaged, or causing flooding issues.

This is a choke control which is used on various types of trimmers for yards and gardens. It is made of durable plastic and is responsible for letting fuel go into the engine whenever the motor is running. The choke control comes with a steel ball, metal valve door, and a spring. If the choke control is damaged or stops working, it will need to be replaced. The engine will not receive fuel if the part is malfunctioning or otherwise damaged.This is a fairly easy replacement project that requires no tools other than a screwdriver. First, make sure the trimmer is turned off to prevent any accidents. Place it on a flat surface while making the replacement. The first step is to remove the carburetor from the engine. At that point, the choke control can be removed and the new replacement part can be installed. Reinstall the carburetor and the equipment will be ready for use.This choke control is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The choke control is designed to be used in string trimmers and hedge trimmers created by Craftsman, Poulan, and Weed Eater.

Replacement screw for leaf blower and trimmer engines. Secures housing and internal components. Replace if stripped, damaged, or lost during repairs.

Foam air filter cleans incoming air to prevent dust and debris from entering the carburetor. Replace when clogged or worn to restore performance. Verify fit.

Replacement screw for brush cutters, chainsaws, and trimmers. Used to secure various components. Replace if stripped, missing, or damaged during use.

Engine gasket kit seals your hedge trimmer's engine to prevent damage. Replace if you see smoke from exhaust or oil leaks. Verify fit with your model.

This throttle cable is made for string trimmers and hedge trimmers. The part is designed to link the throttle trigger with the carburetor to ensure the equipment runs smoothly at all times. The small connectors on the end of the throttle cable can break or become brittle through time and use. Throttle cables can also kink or become damaged in other ways and will need to be replaced. If there is damage to the throttle cable, it will need to be removed for the replacement process. This can be done by pulling the two sides of the throttle parting apart from each other. The throttle trigger can be removed as well as the back cover. Once that's complete, the throttle cable can be taken out. Pass the new cable through the hole in the carburetor mounting plate and the engine housing. Reassembly before use.This throttle cable is sold as an individual component. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The cable is made to fit string trimmers and edger trimmers manufactured by Weed Eater and Craftsman.

If your edger won't start or runs rough, a worn spark plug is often the culprit. This part restores ignition for smooth starts. Quick 5-minute fix.

Loss of compression or power in your trimmer? This cylinder works with the piston assembly to restore engine performance. Moderate DIY repair project.

Fix engine overheating or oil leaks with this cylinder head bolt. Secures the cylinder to the manifold in trimmers and blowers. Easy 15-minute repair.

Engine gasket kit seals your hedge trimmer's engine to prevent damage. Replace if you see smoke from exhaust or oil leaks. Verify fit with your model.

Secures the muffler cover to the muffler on chainsaws and small engines. Replace if screw is stripped, missing, or no longer holds the cover securely.

Complete spark arrestor kit for line trimmer and blower mufflers. Replace worn, clogged, or damaged arrestor screens to prevent hot debris emission.

Plastic housing screw for trimmers, hedge trimmers, and blowers. Replaces cracked, stripped, or missing screws that secure external covers and panels.

The fuel line pickup assembly includes the fuel filter and fuel line. This line carries the fuel to the carburetor, passing it through the filter on the way to remove any impurities that may be in the fuel. This ensures optimal performance and keeps the carburetor in good condition and free from debris and other buildup. Over time, the filter and line can become clogged. Typically, fuel filters are a part of routine maintenance, but they can also fail intermittently from a clog or other issue. In some cases, it may be best to replace the entire pickup assembly. This genuine fuel line pickup assembly is an OEM manufacturer replacement part from Husqvarna. It is designed to be used on select models of hedge trimmers from Poulan, Craftsman, Weed Eater, and Husqvarna. The part should be installed in a well-ventilated area and fuel should always be drained before working on the carburetor or other fuel line parts. Disconnect the spark plug before beginning repairs and be sure to wear gloves for hand protection.

If your chainsaw won't start or runs then stalls, a cracked fuel line may be blocking fuel flow. This replacement line restores proper fuel delivery.

Fuel supply line kit for chainsaws and trimmers. Replaces cracked, brittle, or deteriorated fuel lines. Essential for maintaining fuel system integrity.

Fix fuel leaks and engine starting problems with this fuel line fitting. Connects separated fuel line sections on trimmers, blowers, and chainsaws.

Engine gasket kit seals your hedge trimmer's engine to prevent damage. Replace if you see smoke from exhaust or oil leaks. Verify fit with your model.