Parts for Lg LFXS26596S/02: Dispenser Parts

Replacement screw for securing refrigerator panels and trim pieces. Restores proper fit when original fasteners are damaged, missing, or stripped.

Replacement mounting bolt for refrigerator components and assemblies. Needed when original fastener is missing, stripped, or damaged during service work.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Control board cover assembly for bottom-mount refrigerators. Protects the PCB housing. Replace if cracked, broken, or missing to secure electronics.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Replace your cracked or broken refrigerator drawer tray assembly. Installs in the lower compartment for organized storage. Includes rails for smooth operation.

Fix a cracked or broken freezer drawer basket with this lower freezer drawer tray assembly. Simple snap-in installation takes minutes to restore storage.

Replaces cracked, broken, or missing refrigerator shelf assembly. Restores stable storage and organization for food and containers in your fridge.

Door bin net shelf for bottom-mount refrigerators. Replaces cracked, broken, or missing net shelf inserts in refrigerator door storage bins.

Replacement shelf net organizer that installs on refrigerator shelves to secure bottles and prevent items from shifting. Needed when original is broken or missing.

Replaces cracked, warped, or missing rear cabinet cover on your bottom-mount refrigerator. Protects internal TV components and restores exterior appearance.

Replacement shelf holder for bottom-mount refrigerators. Secures and supports shelves in place. Needed when original is cracked, broken, or missing.

Replaces the fresh room tray assembly in your bottom-mount refrigerator. Restores a stable surface for produce and deli items when original is cracked or broken.

Plastic tray cover for bottom-mount refrigerators. Installs over storage tray to protect contents. Replace if cracked, broken, or missing.

Deli drawer front cover panel for LG bottom-mount refrigerators. Replaces cracked, broken, or discolored decorative cover. Clips onto panel.

Snap-on trim piece that conceals mounting screws and fasteners on your refrigerator. Replace this cover if cracked, broken, or missing to restore appearance.

Replace your refrigerator crisper pan when cracked or warped to restore proper produce storage and prevent spills. Confirm fit with your model number.

Clear plastic vegetable tray that slides into the fresh food compartment. Replace if cracked, broken, or missing to restore organized produce storage.

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Protects tray surface and prevents spills or contamination.

Replacement rail guide assembly for bottom-mount refrigerator drawers. Restores smooth sliding when original is cracked, broken, or worn. Keeps drawer aligned.

Replaces worn or damaged drawer rail guide assembly in bottom-mount refrigerators. Restores smooth gliding and stable drawer support when original is broken or cracked.

Restores insulated core inside freezer door to maintain cold retention and reduce frost. Replace when door loses cooling efficiency or frost builds up.

Restores insulated core inside freezer door to maintain cold retention and reduce frost. Replace when door loses cooling efficiency or frost builds up.

Fix warm fridge temps and frost buildup with this refrigerator door gasket. Creates an airtight seal to keep cool air inside. DIY-friendly install.

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

Exterior trim piece for refrigerator door handle. Replaces cracked, scratched, or worn decorative trim to restore original appearance and finish.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Insulates refrigerator door to maintain temperature and reduce heat transfer. Replace if cooling is inconsistent or energy use increases. Verify fit.

Replace your refrigerator's home bar door assembly when the door is cracked, damaged, or no longer closes properly. Mounts to the home bar compartment.

Replace your refrigerator's inner door shelf that holds bottles and small items. Restores storage and a finished look when original is cracked or broken.

Replaces worn, cracked, or non-responsive control panel buttons on your refrigerator. Restores tactile feedback and proper panel appearance.

Seals your refrigerator's beverage compartment to maintain cold temperatures and prevent air leaks. Replace if torn, cracked, or loose. Verify fit.

Seals the gap between door and cabinet to keep cold air in. Replace if you notice air leaks, frost buildup, or a loose door seal. Confirm fit with your model number.

Seals the refrigerator door to prevent cold air leaks, frost buildup, and temperature fluctuations. Replace if torn, cracked, or no longer sealing tightly.

Connects French doors on refrigerators. Replace if cracked, broken, or spring-damaged. Installs between doors to maintain proper seal alignment.

Replacement guide rail that supports and aligns refrigerator or freezer drawers. Needed when original rail is bent, cracked, broken, or causing drawers to stick.

Replacement door basket for bottom-mount refrigerators. Restores door storage when original bin is cracked, broken, or missing. Holds bottles and condiments.

Replacement door bin for bottom-mount refrigerators. Mounts on the inner door panel to organize condiments, beverages, and small items. Needed when cracked or broken.

Molded plastic door basket that mounts on the refrigerator door to hold bottles, jars, and condiments. Replace a cracked, broken, or missing bin.

Clear plastic storage basket that mounts inside your refrigerator door. Holds condiments, spreads, and small items. Replace if cracked, broken, or missing.

Lower hinge assembly supports and pivots your refrigerator door for smooth operation. Replace if door sags, misaligns, or doesn't seal properly. Confirm fit with your model number.

Stabilizes rotating assemblies in your refrigerator to reduce wobble, wear, and noise. Replace when you notice excessive movement or grinding sounds.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Mounts at the hinge to limit your refrigerator door's opening angle. Replace if cracked, broken, or missing to prevent over-swing and protect the hinge.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replacement drawer slide rail for refrigerator freezer compartments. Restores smooth drawer gliding when original rail is cracked, broken, or worn out.

Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Center door hinge assembly supports refrigerator door pivot for smooth opening and closing. Replace if door sags, misaligns, or won't seal properly. Verify fit with your model number.

Center hinge assembly supports and pivots your refrigerator door at mid-point. Replace when door sags or won't close flush. Verify fit by model number.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Secures and aligns your refrigerator door at the top hinge point. Replace if door sags, binds, or seals unevenly. Confirm fit with your model number.

Secures and pivots your refrigerator door at the top for proper alignment and smooth operation. Replace if door sags or seals poorly. Verify fit.

Secures and aligns your refrigerator door for smooth operation. Replace if door sags, misaligns, or seals poorly. Verify fit with your model number.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Internal bracket assembly that mounts and secures the door handle to your refrigerator door. Replace if the bracket is cracked, broken, or stripped threads.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Fix a dispenser lever that won't activate ice or water flow. This refrigerator dispenser lever restores easy push-button operation in minutes.

Magnetic gasket strip that ensures your refrigerator door closes securely and maintains an airtight seal. Replace when door won't stay closed or seal feels weak. Confirm fit with your model number.

Rubber cap for bottom-mount refrigerators. Installs on various internal components. Replace if cracked, worn, missing, or damaged to restore appearance.

Fix a refrigerator not cooling or freezing over with a new evaporator coil assembly. This part circulates refrigerant to cool your fridge compartments.

Refrigerator won't cool or compressor won't start? This overload protector prevents compressor damage from overheating or power surges. Easy DIY fix.

Fix incorrect refrigerator temperatures with this thermistor assembly. Senses temperature and signals the control board for proper cooling operation.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fixes refrigerator running warm or compressor area overheating. This fan motor assembly circulates air over the condenser coils to regulate temperature.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly that collects condensation beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage issues.

Replaces a cracked, scratched, or damaged front panel on your bottom-mount refrigerator. Restores appearance and protects internal components.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Rear machinery compartment cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing covers that protect compressor components.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix a refrigerator that's not cooling properly with this condenser wire assembly. Connects condenser components for proper heat dissipation and cooling.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Fix a refrigerator that's not cooling in the fresh food section. This fan and grille assembly circulates cold air to maintain even temperatures throughout.

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix a refrigerator that's not cooling properly or making unusual noises with this evaporator fan motor. Direct replacement for bottom-mount models.

Replace a damaged or missing motor cover on your bottom-mount refrigerator. Protects the compressor motor from dust and debris. Simple installation.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

This door stopper cushions and limits the travel of a refrigerator door to prevent slamming and reduce wear on the hinge and cabinet. Replaces a worn or broken stopper to restore smooth, controlled door movement. What it does:

• Acts as a bumper and travel limiter to prevent the door from hitting the cabinet
• Absorbs impact to reduce noise and protect hinge components
• Helps the door close and align properly when opening and closing
• Commonly replaced when cracked, missing, or excessively worn

• Turn off and unplug the appliance or disconnect power before starting any work
• Remove the hinge or door trim as needed to access the stopper following the manufacturer service instructions
• Replace the stopper by removing the old piece and securing the new stopper in the same position; retain original fasteners unless replacement is required

Fix unusual noises or warm temperatures caused by a loose evaporator fan motor. This mounting bracket secures the circulation fan in your refrigerator.

Fix ice buildup in your refrigerator with this defrost heater. Melts frost from the evaporator during defrost cycles to restore consistent cooling.

LED light assembly for refrigerator interior lighting. Installs in fresh food or freezer compartment. Replace if cracked, dim, or not illuminating properly.

Fix a dim or flickering refrigerator interior with this LED light assembly. Direct replacement part restores bright, even lighting in minutes.

Fix a refrigerator that won't power on, has an unresponsive control panel, or operates erratically by replacing the main control board assembly.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Cracked or scratched control panel lens? This display cover assembly restores a clean, readable display and protects electronics. Snaps into place.

Fix your refrigerator when it stops making ice or produces small/hollow cubes. Complete ice maker assembly kit includes bin and mounting hardware.

Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.

Ice maker stopped making ice or won't shut off when bin is full? This assembly automates the fill, freeze, and harvest cycle to restore ice production.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Refrigerator not cooling properly? A failed evaporator fan motor stops cold air circulation. This motor replacement restores airflow across the coils.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

If ice spills in your freezer or the dispenser won't pick up ice, this refrigerator ice bucket assembly restores proper storage and delivery.

This dispenser lever is the user-operated push arm that activates a refrigerator's water or ice dispenser. It replaces a broken or worn lever so the dispenser responds correctly when pressed. What it does:

• Acts as the push actuator for the fridge water/ice dispenser
• Transfers user pressure to the dispenser switch/valve so water or ice is released
• Restores proper alignment and feel if original lever is cracked, loose, or missing
• Fits into the dispenser housing and connects to the dispenser mechanism

• One dispenser lever

• Disconnect power to the appliance before starting any repair
• Remove the dispenser bezel or front panel per your model's service instructions to access the lever
• Inspect surrounding clips and pins; replace any damaged fasteners for a secure fit

If your refrigerator is making loud noises or not cooling properly, the AC motor may have failed. This motor powers essential cooling components.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Replaces cracked or leaking water line connector tubes in refrigerators. Restores proper water flow between components. Confirm fit with your model number.

Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.

Fix ice maker not filling or water dispenser not working with this refrigerator water inlet valve assembly. Solves leaks and no-water issues. DIY repair.

Fix no water or ice issues with this water inlet valve. Common when ice maker won't fill or dispenser trickles. Easy 10-minute DIY with video guide.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for bottom-mount refrigerators. Snaps over mounting screws or fasteners to conceal hardware. Replace if cracked, broken, or missing.

Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.

Secures and protects your refrigerator's internal air filter while maintaining proper airflow. Replace if cracked or loose to restore the sealed fit.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Replace a broken or leaking water filter housing that prevents water flow to your dispenser and ice maker. Direct fit for bottom-mount refrigerators.

Secures and protects your refrigerator's air filter, maintaining proper airflow and filtration. Replace if cracked or loose. Verify fit with your model.

Complete freezer door assembly for bottom-mount refrigerators. Replaces cracked, dented, or damaged freezer doors. Includes door shell and inner components.

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Freezer door won't lock or close securely? This lever cover protects the door lock mechanism from wear and impact damage. Easy DIY installation.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.

Taptite mounting screw for bottom-mount refrigerators. Secures interior components and panels. Replace if stripped, missing, or broken during repair.