How to Troubleshoot & Replace Frigidaire AP2126499 / 316220805 Control Panel Overlay (Electronic Oven Control)

I bought a new clock assembly 

Researched the code, I read the instructions on the back of the oven, removed the OCB board, got online to shop around for a new one, got the best price from Appliance Parts Pro, Ordered it that evening, arrived next day.. Less than 10 minute fix .. 

Replaced the panel with the parts I ordered. This is the second time I have replaced the digital panel for my gas stove now 14 years old. 

First of all, Thank You for the quick service! I received my parts within 2 days. Thank You It was an easy fix, pretty much unplug one plug in the new one. Ordering parts from your website was quick and easy. Enter a few numbers from the appliance and what I was looking for and they came up. Can't say enough about how quick I received the parts. Thanks again 

I called appliance parts pros after no success with other service companies. Brandy answered and asked for my part number. I gave her the number but she said that wasn't a real part number. She told me likely places to look for it and I finally located it and sent her a picture of the part and serial number. She located the part but nobody had the plastic cover in bisque so she recommended the black which really looks good. I got the parts in a couple of days and it was really a plug in the new wires and we were fixed, 15 minutes at most. Brandy really knew her stuff. I would use them again. 

I removed the back top panel of the stove and took out the board. Something good to do which I did was to take a picture of the wiring in case you forget. I had to remove the actual board from the black "frame" in order to confirm that it was burnt/blown. And by the way I looked it up on YouTube to see what was wrong. Once I confirmed it was the same issue as what was on YouTube, I ordered the control board and paid $4 extra so it would get to me in a couple of days. The overlay that has the labels for the buttons is separate and is way overpriced but it is needed. I installed it and when I plugged in the stove nothing happened and it so happened I tested the outlet and there was no current. I checked the main switch and it got tripped when the board blew so I turned it completely off and then back on and then there was current. I plugged the stove in and then it worked. Overall a very easy fix and saved me a lot of money. 

Unscrewed the top back plate with a small nut driver and removed the controller with a phillips screwdriver (I used a 6-in-one for both). I replaced both the controller (AP3693959) and faceplate (AP2126499) at the same time rather than try to peel off the old faceplate. Before purchase, I was concerned my oven's 15 pin connector would not match the two 6 pin connectors on the controller. Here's how it goes: Plug the large 15 pin connector in matching up the first pin on the far left of the left 6 pin connector and it spans across both 6 pin connectors and works fine. There are three unused pins in the 15 pin connector at pin numbers 7, 14, and 15 (counting from the left). Pin 7 spans the bridge between the two 6 pin connectors and pins 14 and 15 extend beyond the right side of the right 6 pin connector. Take a picture of the old one before removal if you need to. Also, there are two unused spade terminals below the Bake-Broil-L1 spade terminals that do not get used on the new board. Hopefully, this new controller is more robust and does not fail in the FULL-ON condition as did the original board! 

AFTER BUYING THE PART FROM YOU AND WATCHING THE HOW TO VIDEO. YOU PROVIDED, A FRIEND SUCCESSFULLY REPLACED THE OLD UNIT WITH THE NEW. EVERYTHING IS WORKING PERFECTLY AGAIN. THERE WAS ONE OF THE CONNECTORS WHICH WAS DIFFICULT TO UNHOOK BUT NOT A BIG PROBLEM. I WAS SO HAPPY TO BE ABLE TO CONTINUE USING MY RANGE WHICH STILL LOOKS NEW. THANK YOU FOR PROVIDING THE PART AND ESPECIALLY THE HELP WITH INSTALLATION WHICH YOUR VIDEO MADE SO MUCH EASIER. 

Ordered the oven control board took about 20 minutes to change it took about 20 minutes to clean under the stove and clean the sides of the stove before sliding it back in position all went well . Thank you for your prompt attention! George 

Replaced oven control board oven working fine