I received the water valve in two days; It was amazingly fast and no extra charge. I had to move the refrigerator and shut the water; remove six screws to have access to the valve. I removed two screws holding the valve and disconnect the two electrical connectors. The connectors have different colors and sizes so you cannot make a mistake there. The water connectors are color coded and different size so no mistake there either. The only change was the water connectors, the old valve had plastic screwable connectors; the new valve had push-in locks. It was as simple as cutting the plastic tubes and insert them into the push-in locks, connect wires, secure the valve, close the back access and turn the water back on. I let the water run and the refrigerator is working fine ever since.