Parts for Ge JGS760BP1TS: Door & Drawer Parts

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Speed nut clip secures your range oven bottom panel. Replace when missing or damaged to prevent panel rattling. Verify fit with your model number.

Range oven door hinge serves as the pivot point for smooth opening and closing. Replace when hinge is bent, worn, cracked, or damaged from use.

Pivot hinge that supports the range oven door for smooth opening and closing. Replace if broken, cracked, or door won't stay properly aligned.

Range bottom panel that forms the base of the cabinet frame. Replaces damaged, rusted, or missing bottom panels to restore structural integrity.

Left-hand drawer slide assembly for electric and gas ranges. Replaces cracked, broken, or worn slides that cause drawers to stick or misalign.

Right-hand slide assembly for range warming drawers. Replaces cracked, broken, or worn drawer glides that prevent smooth drawer operation.

Vent cover trim for gas ranges. Installs over the vent opening on the cooktop surface. Replace if cracked, chipped, discolored, or missing.

Complete door glass and panel assembly for gas ranges. Replaces cracked, shattered, or broken outer door glass. Essential for restoring appearance.

Replace cracked, shattered, or stained oven door window glass. Clear glass pane restores viewing into the oven cavity. Installs in door assembly.

This 10-24 machine screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. Small, service-grade fastener for repeatable repairs and safe operation. What it does:

• Fastens control panels, trim pieces, brackets, or assemblies that use a 10-24 threaded screw
• Restores secure mounting when a screw is missing, stripped, or damaged
• Helps stop panel rattling, misalignment, or intermittent contact caused by loose parts
• Compatible with repair or replacement tasks requiring the standard 10-24 thread size

• Unplug or disconnect power to the appliance before starting repairs
• Use the correct driver or socket to avoid stripping the head; do not overtighten
• Replace only like-for-like 10-24 fasteners to maintain proper fit and thread engagement
• If threads in the receiving part are damaged, repair or replace the mating component rather than relying on a longer or different screw

Inner door liner weld assembly for range ovens. Installs inside the door to restore structural integrity. Replace if cracked, bent, separated, or missing.

Secures and supports your range drawer to prevent sagging and ensure smooth operation. Replace when drawer misaligns or wobbles. Confirm fit with your model.

This barrier door restores the dryer's internal airflow path to help block backflow and direct exhaust air for proper drying performance. Replaces a damaged or stuck door that can interfere with venting. What it does

• Seals the dryer exhaust path to prevent air from flowing the wrong way.
• Helps maintain proper airflow so clothes dry more efficiently.
• Reduces the chance of lint or debris moving back into the drum area.
• Can stop rattling or scraping noises caused by a broken or loose door.

• One barrier door

• Disconnect power to the appliance before starting any repair.
• Remove the dryer front or lint-trap assembly as needed to access and replace the barrier door.
• Keep fasteners and mounting orientation the same; secure all screws and clips firmly.

A replacement handle mounting bracket that secures an appliance door handle to the door surface for safe, stable operation. Restores a loose or broken handle attachment so the handle stays firmly in place during use. What it does:

• Secures the door handle to the appliance door and provides a stable attachment point.
• Replaces a broken, cracked, or bent bracket that lets the handle wobble or detach.
• Helps eliminate handle movement and restore normal handle function.
• Compatible with the original handle mounting points to maintain proper alignment.

• Safety first: disconnect power and/or unplug the appliance before starting any repair.
• Use basic hand tools (screwdriver, socket) to remove trim or screws holding the old bracket; keep fasteners for reassembly.
• Support the handle while removing and installing the bracket to avoid dropping or damaging the door.
• Do not overtighten screws; snug fasteners to secure the bracket without stripping threads.

This handle bracket secures a refrigerator/freezer door handle to the appliance, restoring a solid grip and proper door operation. It replaces a worn, cracked, or broken bracket to keep the handle aligned and stable during use. What it does:

• Provides the mounting support for a door handle so the handle stays firmly attached
• Restores proper handle alignment to reduce wobble or shifting when opening the door
• Stops slipping or intermittent detachment caused by a cracked or damaged bracket
• Helps prevent further damage to the door or handle from continued use with a broken mount

• One handle bracket

• Designed for direct replacement; compare part number to the original before ordering
• Basic hand tools typically required; handle and trim may need removal to access bracket
• Disconnect power (and empty door area) if working near electrical components or lights
• If mounting hardware isn't present, reuse the original screws or order the specific fasteners listed by the OEM

Insulation panel for electric and gas ranges. Installs inside the range cavity to provide thermal protection. Replace if torn, deteriorated, or missing.

Mounting screw for refrigerator doors, shelves, kickplates, and interior components. Replace missing, stripped, or corroded screws during repairs.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Front bottom trim piece for electric and gas ranges. Replaces cracked, broken, or missing trim along the bottom edge of your range front panel.

Replace your range's badge assembly if the original is cracked, broken, or missing. This decorative nameplate installs on the control panel area.