Parts for Ge JGS760BP1TS: Gas & Burner Parts

Converting your gas range from natural gas to propane? This LP conversion kit includes orifices for all burners and oven. Basic DIY project.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Small mounting bracket secures components beneath your cooktop surface. Replace if damaged, bent, or missing to restore proper alignment and stability.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Fix wobbly control knobs or valves not turning properly with this gas range switch harness. Connects burner controls to valve assembly.

If your ice maker isn't filling properly or ice cubes are misshapen, this inlet jet restores correct water flow to the dispenser and ice-making area.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

Gas range orifice holder secures burner orifices for proper gas flow. Replace if damaged, cracked, or causing uneven flames. Confirm fit with model number.

Left rear orifice holder for gas ranges. Secures the gas orifice in place. Replace if cracked, broken, or missing to restore proper burner assembly.

If your right-front burner won't ignite, has a weak or uneven flame, or gas flow is inconsistent, this orifice holder secures the burner orifice.

Right rear burner won't ignite or flame is uneven? This orifice holder secures the burner orifice for proper gas flow and stable ignition.

Fix weak or uneven flames on your gas range center burner. This orifice holder secures the orifice to the valve for proper gas flow and ignition.

Oven not heating evenly or won't reach temperature? This bake burner assembly restores proper heat distribution for reliable baking and roasting performance.

Weak or uneven broiling? This tubular broil burner restores concentrated high-heat performance for even browning and crisping in gas range ovens.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix a burner that won't turn off or has a stiff knob with this gas range burner valve. Controls gas flow to individual burners. DIY repair takes 1-2 hours.

If knobs feel loose or debris gets into burner controls, this valve seal prevents spills from entering the valve stem area. Simple 5-minute fix.

Routes gas from manifold to burner ports for proper ignition and flame stability. Replace if burners won't light or flames are uneven. Confirm fit with your model.

Gas range burner won't light or has weak flame? This manifold supply tube routes gas from the valve to the burner. Moderate DIY repair restores ignition.

If your gas burners won't ignite or click but don't light, this electrode and harness assembly delivers the spark needed to restore reliable ignition.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Fix oven ignition issues or gas smell problems with this valve control assembly. Controls gas flow to burners for precise flame regulation.

Oven won't heat or ignite? A failing igniter is the most common cause. This glow bar igniter heats up and draws current to open the gas valve. Easy DIY fix.

Fix a gas oven that won't heat or takes too long to preheat by replacing a weak or cracked igniter. This hot surface igniter lights the burner reliably.

Stamped metal shield that protects the oven's lower cavity and insulation from excessive heat. Replace if cracked, rusted, corroded, or damaged.

Fixes water leaks or low flow to ice maker and dispenser. This 90° elbow connects your range's water line to the fill system. Direct-fit replacement.

If your oven shuts off during preheating around 200°F, the tangential blower may be failing. This cooling fan circulates exhaust air from the cavity.

Fix F97 error codes and overheating ovens with this cooling fan sensor. Monitors ventilation and temperature control. Moderate difficulty repair.

This cover latch secures the appliance's top access cover so it stays closed during use and lets you open the cover for service or maintenance. It restores a positive, smooth-closing latch action for safe access. What it does:

• Holds the top/access cover closed to prevent accidental opening during operation
• Provides a solid engagement point for the cover to snap or latch into place
• Replaces a broken, worn or loose latch that causes rattling or an unsecured cover
• Helps ensure proper alignment of the cover for safe servicing and operation

• Disconnect power (unplug or shut off breaker) before beginning any service
• Typically installs with simple snap-in or screw fasteners; keep fasteners from the original part

Fix a non-working convection fan or cooling blower with this range blower motor wiring harness. Common repair for ovens with electrical failures.

Restores proper gas flow when burners won't light or flame is weak. This supply tube connects the valve to the burner for reliable ignition and heat.

This air deviator routes and directs cold airflow inside the refrigerator to balance temperatures between compartments and improve cooling performance. It restores proper air distribution when the original piece is cracked or misaligned. What it does:

• Redirects chilled air from the evaporator to the correct compartment to help maintain even temperatures
• Helps prevent warm spots caused by blocked or misdirected airflow
• Works with the fridge's air circulation path to support normal cooling cycles
• Common symptom: uneven cooling or air bypass near the evaporator cover

• One air deviator

• Inspect and replace only when the existing deviator is broken, warped, or missing
• Handle plastic parts gently to avoid cracking; align tabs before snapping into place
• Always unplug the appliance before accessing internal panels or components
• No special tools typically required;