Parts for Lg LMX25988ST: Door Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This refrigerator door gasket forms a tight perimeter seal to keep cold air in and warm, humid air out. Replacing a damaged or warped seal helps maintain temperature, reduce frost and condensation, and support efficient operation.

• Seals the gap between the door and cabinet to prevent air leaks
• Helps maintain stable internal temperature and humidity
• Reduces frost and condensation buildup inside the compartment
• Common symptoms: visible tears or warping, gaps or loose corners, moisture around the door, excessive frost, or the door not closing/staying closed

• Disconnect power and clear items from the door before starting
• Allow the new gasket to warm to room temperature; use low, indirect heat (hair dryer) to relax folds—do not overheat
• Remove the old seal and clean the mating surface/retainer; install the new gasket starting at the corners and seat it fully and evenly
• After installation, perform a "dollar-bill" test around the perimeter and adjust seating/door alignment as needed; allow time for the gasket to set

The Door Gasket Assembly is an OEM part for LG refrigerators. It maintains the refrigerator's efficiency and performance by providing an airtight seal for the door. This seal ensures that the cold air stays inside while preventing warm air from entering, which is vital for the preservation of food and energy conservation. Over time, the gasket can become worn or damaged due to regular use or accidental mishandling, leading to a poor seal and potential increases in energy consumption.

Causes of a bad Door Gasket Assembly include wear and tear from normal use, damage from cleaning, or deformation due to improper installation or accidents. 

Symptoms of a bad Door Gasket Assembly include:

• Noticeable gaps or tears in the gasket.
• Condensation or frost buildup around the door edges.
• The refrigerator runs more frequently than normal.
• Difficulty maintaining consistent internal temperatures.

This OEM LG part is also compatible with Sears/Kenmore.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

This basket assembly restores the washer drum that holds laundry and lets water flow for effective cleaning. It replaces damaged or worn baskets to reduce fabric snags and help restore smooth tumbling and even loads. What it does:

• Holds clothes during wash cycles while allowing water and detergent to circulate.
• Replaces baskets with dents, holes, corrosion or rough surfaces that can catch or damage fabric.
• Helps correct tumbling problems and reduce imbalance-related noise or vibration when the basket is damaged.
• Works with the washer's tub/bearing system to maintain proper rotation and drainage.

What's included: One basket assembly. Install notes:

• Disconnect power and water before starting any repair.
• Replacing the basket typically requires disassembling the washer cabinet and removing the drive pulley, motor coupling or belt and possibly the tub/bearing—use appropriate tools.
• Inspect tub bearings, seals and suspension components while replacing the basket; replace any worn parts to prevent repeat failure.

This Door Basket Assembly is the refrigerator door shelf bin that mounts to the inner door. Replacing a damaged bin restores secure, usable storage for condiments and bottles and helps prevent spills and items falling when the door swings.

• Mounts to molded tabs/slots on the door liner to provide shelf storage
• Keeps containers upright and reduces movement during door opening/closing
• Replace if cracked, has broken tabs, won't stay seated, falls off, or is missing
• Restores proper fit and organization on the door

• Empty and support the old bin; lift straight up and out from the door tabs
• Align the new bin with the slots and press down until fully seated
• Confirm the bin is level and locked in place before loading
• Allow cold plastic to warm to room temperature before installation to reduce risk of cracking

The Door Basket Assembly is an OEM part for LG refrigerators. It attaches to the interior of the refrigerator door, providing convenient storage for condiments, bottles, and small food items. This basket assembly helps maximize storage space and keep your refrigerator organized, making it easier to find and access items quickly.

Over time, the basket assembly may need to be replaced due to wear and tear, such as cracking, breaking, or becoming loose. Damage can occur from overloading the basket with heavy items or from an accidental impact.  

Symptoms of a bad Door Basket Assembly include:

• Difficulty fitting into its designated spot on the refrigerator door
• Cracks or breaks in the plastic material
• The basket becoming dislodged or falling off the door easily

This OEM LG part is also compatible with some Kenmore models.

The Door Basket Assembly is an OEM part for LG refrigerators. It helps keep your refrigerator organized and maximizes storage capacity, allowing for easy access to frequently used items.

Causes of a faulty door basket assembly can include wear and tear over time, damage due to mishandling or impact, or broken or worn-out components. These factors can result in a loose or unstable basket, difficulty in keeping items secure, or the basket not fitting correctly on the door.

Symptoms of a bad door basket assembly may include:

• Basket falling off or not staying securely attached to the door
• Limited or compromised storage capacity on the refrigerator door
• Visible cracks, damage, or deformities in the basket

This OEM LG part can also be used on Kenmore/Sears appliances. 

STOPPER ASSEMBLY,DOOR

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

This joint assembly is the connector that joins two refrigerator water tubes to form a tight, leak-resistant seal. Replace it to stop leaks at a line coupling and restore reliable dispenser and icemaker water flow.

• Connects two plastic water lines within the refrigerator's water system
• Maintains a watertight seal to prevent drips and air intrusion
• Common fix for leaks at a coupling or tubing that won't stay seated
• Symptoms include slow/sputtering dispenser, small/no ice production, or visible seepage at the connector

• Unplug the refrigerator and shut off the water supply before servicing
• Dispense water to relieve line pressure
• Depress the connector collar to release the tubing; cut damaged tube ends square and fully insert tubing until it bottoms out
• Restore water and power, then check all connections for leaks

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Water Line Connector is an OEM replacement part for LG refrigerators. It is responsible for connecting the water supply line from the home plumbing to the refrigerator's internal water distribution system, allowing for ice and water dispenser functionality. 

Causes of a bad water line connector can include cracking, leaks, or deterioration of the connector material over time due to regular water pressure and temperature fluctuations. Connectors may also become damaged if exposed to impact.

Symptoms of a bad water line connector include:

• Leaks at the connection point between the line and refrigerator
• Loose, slipping, or disconnected water line fitting  
• Reduced water pressure or no water flow to the dispenser
• Error codes related to water flow from the refrigerator diagnostics

 This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Water Tank Assembly is an OEM part for LG refrigerators. It stores and supplies water for the refrigerator's dispenser and ice maker, ensuring a steady and clean water flow for these features.

Causes of a bad water tank assembly can include mineral buildup from hard water, leaks due to cracks or punctures, or contamination from mold or bacteria if the tank is not regularly cleaned. Over time, wear and tear from repeated use can also lead to failure.

Symptoms of a bad water tank assembly include:

• Water dispenser not functioning properly
• Reduced or no ice production
• Leaks or puddles inside the refrigerator
• Unpleasant taste or odor in the water

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Water Inlet Valve is an OEM part for LG refrigerators. It controls the flow of water into the refrigerator for the ice maker and water dispenser, ensuring a steady and controlled supply of water.

You should replace the water inlet valve if it becomes clogged, damaged, or fails to function properly. Causes of a bad water inlet valve can include mineral buildup from hard water, electrical malfunctions, or general wear and tear over time.

Symptoms of a bad water inlet valve include:

• The ice maker not producing ice
• The water dispenser not dispensing water
• Leaking water from the valve area
• Unusual noises when the valve is operating

This OEM LG part is also compatible with Sears/Kenmore refrigerators.