Parts for Lg LRTN22310TT: Door Parts

This replacement screw secures panels and internal components in compatible LG appliances, restoring proper fit and preventing rattles or loose parts. Use it to replace a missing or stripped fastener for a snug, reliable fit. What it does

• Fastens panels, brackets, or components to appliance frame or assemblies
• Helps stop vibration and rattling caused by missing or loose screws
• Restores proper alignment of removable panels or covers
• Works where the original appliance screw has worn, stripped, or gone missing

• Replacement screw as shown

• Disconnect power and water supply to the appliance before beginning any repair
• Use the correct-size screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid over-tightening to prevent damage to threads or components
• Keep removed screws organized and compare head and length to the replacement before installing

This replacement screw secures appliance components in their proper position. Replacing a missing or damaged fastener restores a snug fit, reduces rattling or vibration, and helps keep assemblies aligned for reliable operation.

• Secures panels, brackets, and internal components as specified by your model's parts diagram
• Replaces stripped, rusted, or missing hardware
• Helps address symptoms like rattling/vibration noise, loose panels/trim, or minor misalignment
• Maintains a stable, safe assembly during normal use

• Disconnect power; turn off water and gas supplies if applicable
• Match screw to its original location; do not mix different lengths or types
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• Follow your model's service/parts diagram for correct placement

This door gasket creates an airtight seal between the refrigerator door and cabinet to keep cold air in and humid air out. Replacing a worn gasket helps restore proper temperatures, reduce frost and condensation, and improve efficiency. What it does:

• Seals the door perimeter to prevent air leaks
• Helps maintain stable interior temperature and humidity
• Reduces frost, moisture, and icing near the door opening
• Common signs of failure: tears, cracks, warping, gasket won't stay seated, door not closing fully, condensation or frost along the gasket

• 1 door gasket

• Unplug the appliance before servicing
• Let the new gasket warm and relax (room temp or warm water) to remove folds
• Remove the old gasket from the retainer/channel; install the new one starting at the corners and working evenly around
• If your model uses retainer screws, loosen to remove/seat the gasket and retighten snugly—do not overtighten
• Use low heat (hair dryer) to gently smooth waves; verify seal all around (paper-slip test) and adjust hinges/leveling if needed

This refrigerator guide aligns and supports a mating component so it travels smoothly and stays on track. Replacing a cracked or missing guide restores proper movement and helps prevent binding, jamming, or premature wear.

• Guides and stabilizes the movement of the associated part to ensure smooth travel
• Keeps components aligned to prevent rubbing, derailment, or gaps
• Common signs of failure: sticking or binding, wobbling/misalignment, or parts coming off track
• Visible damage such as cracks, broken tabs, or missing pieces on the guide

• Disconnect power; if working near a dispenser or water path, turn off the water supply
• Remove the access panel/bin as needed and retain any screws/clips
• Seat the new guide and reuse existing hardware; verify a secure fit
• Restore power and test the component's movement for smooth operation

This door gasket assembly is the appliance door seal that helps keep cold air inside the refrigerator, improving cooling efficiency and reducing frost and moisture buildup around the door. What it does:

• Creates an airtight seal around the refrigerator door to help maintain proper internal temperature.
• Helps reduce energy use and prevents warm air from entering the cabinet.
• Commonly replaced when you notice warm spots, excessive frost, visible gaps, or moisture between door and cabinet.
• Restores proper door sealing to help preserve food freshness and prevent compressor overwork.

• Disconnect power to the appliance before starting any repairs.
• Remove the old gasket and clean the gasket channel before installing the new seal.
• Press and align the new gasket into the channel, ensuring the magnetic/edge flange seats fully around the door.
• After installation, close the door and check for uniform contact; allow the gasket to settle before final testing.

This door basket is a refrigerator door shelf that restores storage space and secures bottles, jars and small items on the door. It replaces a cracked, broken or missing door bin so items stay organized and easy to reach. What it does

• Holds bottles, condiments and other small food items on the refrigerator door
• Replaces cracked, warped or damaged door shelf that no longer secures items
• Restores usable door storage to reduce shifting or spills during normal use
• Helps maintain proper organization and access to frequently used items

• One door basket

• High-level swap: remove the old bin by lifting or unclipping, then seat the new basket into the door rails until it locks in place
• Check door rail alignment and clean mounting area before installing
• Handle with care to avoid cracking the new plastic during installation
• Disconnect power only if working near electrical components; this is a non-electrical replacement

This door basket is a replacement refrigerator door bin that restores inside-door storage for bottles, jars and small containers. It helps keep foods organized and prevents items from shifting or falling when the door opens. What it does:

• Provides a secure shelf on the interior door for bottles, condiments and other small items
• Replaces cracked, broken or missing door storage to restore usable space
• Helps reduce shifting and spillage when opening and closing the refrigerator door
• Matches OEM fit and mounting points for straightforward replacement when correct part number is used

• One replacement door basket

• Inspect mounting pegs or tracks on the door for damage before installing
• Align the basket tabs with the door slots and snap into place until fully seated
• Use only the exact replacement part number to ensure proper fit

A replacement hinge cap that covers and protects the upper door hinge, restoring a finished look and helping keep the hinge area free of debris. Durable plastic restores appearance and prevents direct wear on the hinge. What it does:

• Covers the exposed upper door hinge to protect it from dirt, dust and moisture.
• Helps prevent cosmetic damage to the door edge by shielding the hinge.
• Replaces cracked, broken or missing caps that leave the hinge exposed.
• Can reduce rubbing or noise caused by a damaged or misaligned cap.

• Typically snaps into place; basic hand tools may be helpful to remove the old cap.
• Support the door or follow manufacturer guidance if hinge removal or adjustment is needed.
• Inspect surrounding hinge components for wear when replacing the cap.

This freezer door stop cushions and limits the freezer door's movement to prevent over-travel, reduce impact noise, and protect the door and cabinet from damage. Replacing a worn or missing stop restores smoother, quieter door operation. What it does:

• Stops the freezer door from swinging too far and absorbing impact at full open
• Helps prevent door misalignment and sealing gaps that can lead to cooling issues
• Common symptoms: loud thud when opening, visible crack or missing bumper, door catching on cabinet
• Simple wear item — replace when cracked, flattened, or missing

• Unplug the appliance or disconnect power before working near electrical components
• Many door stops snap or slide into place; a flat screwdriver or trim tool may help with removal
• Avoid forcing parts; inspect surrounding trim and gasket for damage before reassembly

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.

This white plastic holder bracket secures a small component or trim piece inside the appliance, restoring proper fit and preventing rattling or misalignment. It's a simple replacement that helps the affected area sit correctly. What it does:

• Replaces a cracked or broken bracket that no longer holds parts in place
• Restores secure alignment for the attached trim, panel, or internal component
• Stops rattling or movement caused by a failed bracket
• Helps prevent damage from loose parts rubbing or falling out

• Disconnect power (and water supply if applicable) before servicing
• Remove the surrounding trim or panel to access the bracket; small clips or screws may secure it
• Use appropriate hand tools and gentle pressure when removing the old bracket to avoid damaging adjacent parts
• Compare the new bracket to the original before final installation

This rail guide assembly helps align and support a sliding drawer or shelf so it opens and closes smoothly and stays on track. Replace a worn or damaged guide to restore proper drawer movement and reduce sticking or misalignment. What it does:

• Supports and guides a sliding drawer or shelf along the cabinet track
• Prevents drawer from binding, catching, or coming off the rail
• Restores smooth opening and closing and reduces noise from rubbing or scraping
• Helps keep drawer level and properly aligned during use

• Disconnect power and empty the drawer before starting any repair for safety
• Remove the drawer or shelf to access the guide, then unfasten retaining clips or screws as needed
• Align the new guide on the rail and secure it; confirm smooth operation before reassembling
• If clips or fasteners are damaged, replace them to ensure a secure fit

This is a replacement mounting screw used to secure appliance panels, trim or components. It restores proper attachment to reduce vibration and rattling and helps keep removable parts firmly in place during operation. What it does:

• Fastens panels, brackets or trim pieces to the appliance frame
• Restores secure fit when original screw is missing, loose, or stripped
• Reduces rattling and vibration caused by loose hardware
• Helps maintain proper alignment of removable covers and control panels

• Disconnect power and water before starting any repair
• Verify size and thread match the original screw before installation
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten — overtightening can strip threads or crack plastic parts
• Keep small parts away from children and pets

This condenser fan motor spins the cooling fan that draws air across the condenser coils and around the compressor. Replacing a weak or seized motor restores proper heat removal so the refrigerator can hold temperature and run more efficiently. What it does:

• Drives the condenser fan to move air through the rear condenser/compressor compartment
• Helps dissipate heat from the refrigerant and protects the compressor from overheating
• Supports stable internal temperatures and efficient cooling performance
• Common symptoms: fan not running, louder rattling/grinding at the back-bottom, hot cabinet sides, warmer-than-normal refrigerator temperatures

• Includes 1 cooling fan motor

• Disconnect power before servicing; pull the unit away from the wall for access
• Remove the rear lower access panel to reach the condenser fan area
• Note wiring and fan-blade orientation; transfer the blade and any mounting hardware from the old motor as needed
• The fan spins freely and airflow direction matches the original before reassembly