Parts for Maytag MRT711SMFB00: 04 - Door Parts

This factory mounting screw secures components in place inside compatible appliances, helping maintain proper alignment and reliable operation.

• Fastens panels, brackets, or internal parts to prevent shifting and vibration
• Common fix when a panel or bracket is loose or rattling
• Resolve issues like gaps, misalignment, or buzzing from loose hardware

• Unplug power and shut off utilities before servicing
• Retain and reuse original hardware and clips where applicable
• Start threads by hand to avoid cross-threading, then tighten snugly without over-torquing

The Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms an important seal around the refrigerator door, preventing warm air from entering the sealed interior compartment. Maintaining proper temperature and humidity levels inside depends on an intact, well-sealed door gasket.

Causes of a bad door gasket can include cracks, tears or deterioration over time due to exposure and normal compression/expansion cycles. Food particles or debris trapped against the gasket can also damage sealing integrity.

Symptoms of a bad door gasket include:

• Difficulty closing or sealing the door properly
• Higher electric bills from the refrigerator running more often
• Warm air leaking into the refrigerator sections
• Loss of interior temperature regulation

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door trim is the outer decorative and protective ring that fits around the appliance door opening to restore appearance and help keep the door edge finished. Replace damaged trim to improve the door's look and protect the door edge. What it does

• Covers and protects the outer edge of the door for a finished appearance
• Replaces cracked, dented, or scuffed trim that detracts from the appliance
• Helps maintain a flush fit and reduces the chance of debris catching on the door edge
• Useful when door trim is bent or broken from impact or wear

• One door trim piece as shown

• Disconnect power (and gas if applicable) before starting any repair
• Remove the door from the appliance per the service manual to access trim fasteners
• Use appropriate trim/fastener tools to avoid damaging the new part or surrounding finish

This replacement name plate restores the appliance's identification label so model and serial information is legible and the exterior looks complete. It's a simple cosmetic and identification part that helps owners read key appliance info. What it does

• Replaces a faded, damaged, or missing identification label
• Restores readable model/serial/manufacturer details for service and registration
• Improves cosmetic appearance where the original label is worn or peeled
• Helps prevent confusion when ordering parts or scheduling repairs

• One replacement name plate

• Clean and dry the mounting surface thoroughly before installing
• Align carefully and press firmly if adhesive-backed; use the original fasteners if applicable
• Handle by the edges to avoid transferring oils or smudges to the label

This large door bin restores sturdy, easy-access storage on your refrigerator door. Replace a cracked or missing bin to keep condiments and bottles organized, prevent tip-overs, and free up space on the main shelves.

• Holds jars, condiments, and beverages on the door to maximize shelf space
• Replaces bins that are cracked, warped, loose, or missing
• Snaps into the designated large-bin positions for your model
• Helps prevent tipping and spills when opening and closing the door

• Unplug the appliance or disconnect power; remove items from the door
• Align the bin's tabs/hooks with the slots on the door liner
• Lower/slide into place until fully seated—do not force
• The bin is locked in before loading items

Color: Black

Color: White

The Hole Plug is an OEM part for Whirlpool refrigerators. It plays an important role in sealing openings and holes within the refrigerator door. The plug prevents air leaks, moisture intrusion, and loss of cool air that could compromise cooling performance. 

Symptoms of a bad or missing door hole plug include:

• Increased humidity and moisture buildup inside the refrigerator  
• Difficulty maintaining proper internal temperatures
• Formation of frost or ice around door openings

Causes can be normal wear and tear over time that damages or dislodges the plug. Accidental impact or damage during cleaning could also dislodge it.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black

Color: White

The Freezer Door Gasket (Black) is an OEM part for Whirlpool refrigerators. This part ensures an airtight seal around the freezer door. This gasket prevents warm air from entering and cold air from escaping the freezer compartment, playing a crucial role in maintaining the freezer's internal temperature. The gasket measures approximately 20.19” x 31.29”.

Causes of a bad Freezer Door Gasket can include natural aging and wear over time, exposure to extreme temperatures that can degrade the material, and physical damage from cleaning or heavy use.

Symptoms of a bad Freezer Door Gasket include:

• Visible cracks, tears, or wear in the gasket, leading to poor sealing
• Condensation or ice buildup around the door edges, indicating air leaks
• Difficulty in maintaining the freezer's set temperature, resulting in increased energy consumption
• The freezer door not closing properly or feeling less resistant to opening

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement screw secures panels, brackets, or trim within your appliance. Replacing a worn, stripped, or missing screw restores a tight, rattle-free fit so components stay aligned and operate as intended. What it does:

• Fastens components at the original factory locations specified for this part
• Replaces missing, damaged, or stripped screws to restore holding power
• Helps reduce vibration and rattling from loose parts
• Maintains proper alignment of panels, covers, brackets, and trim

• Disconnect power (and gas, if applicable) before servicing
• Match to the original screw and install in the same location and orientation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver or nut-driver; transfer any washers or spacers from the original hardware if present

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production. 

Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.

Symptoms of a bad Screw include:

• Loose or dislodged components within the ice maker assembly.
• Inconsistent or halted ice production due to components shifting.
• Unusual noises emanating from the ice maker as a result of loose parts.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Black

The Hinge-Sleeve Hole Plug is an OEM part for Whirlpool refrigerators. It is designed to cover the hinge sleeve holes on the refrigerator door, providing a finished look and protecting the internal components from dust and debris.

Common causes of a bad hinge-sleeve hole plug include physical damage during routine maintenance or accidental impacts. A missing or damaged plug can lead to exposure of internal hinge components, potentially causing further damage over time.

Symptoms of a bad hinge-sleeve hole plug include:

• Visible gaps or holes in the refrigerator door hinge area
• Accumulation of dust or debris in the hinge mechanism
• Loose or unstable refrigerator door hinges

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement handle end cap secures and finishes the end of a door handle. It restores a tight, clean look when the original cap is cracked, stripped, or missing and helps keep the handle firmly attached.

• Anchors and covers the mounting point at the end of the handle
• Helps maintain handle alignment and a solid feel in daily use
• Common fix for a loose or wobbly handle, broken/missing cap, or cosmetic damage
• Resolve gaps at the end of the handle or rattling during use

• Disconnect power to the appliance before servicing
• Support the handle while loosening/removing existing fastener(s) to prevent drops or door damage
• Transfer/reuse any set screw or fastener from the original as required
• Align the new end cap and secure fasteners snugly—do not overtighten

This factory-assembled door unit replaces a damaged or hard-to-close door, restoring proper fit, alignment, and appearance. It's built to match the original, helping the appliance open and close smoothly and operate as designed.

• Forms the complete door structure for the appliance
• Aligns on the hinges for smooth, consistent opening and closing
• Helps ensure proper closure for performance and safety
• Replace if the door is cracked, dented, warped, loose, or won't close/seal correctly

• Disconnect power at the breaker before servicing
• Support the door during removal/installation; large doors can be heavy and awkward
• Transfer any model-specific hardware or trim from the original door as required
• After installation, adjust hinges if needed

The French Door Bin is an OEM part for Whirlpool refrigerators. This durable bin attaches to the inside of the refrigerator door, offering convenient access to frequently used items such as drinks, condiments, and snacks. 

Causes of a bad French Door Bin can include overloading beyond its weight capacity, impact from items being moved in and out of the refrigerator, or degradation of the material over time due to the cold environment and frequent use.

Symptoms of a malfunctioning French Door Bin include:

• Cracks or breaks in the bin that prevent it from holding items securely
• Difficulty attaching or detaching the bin from the refrigerator door
• The bin sagging or not sitting flush against the door, indicating potential damage or wear

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This door trim is the finishing piece that frames the appliance door, concealing fasteners and protecting exposed edges. Replacing a damaged trim restores a clean appearance and helps keep door components properly secured as designed.

• Provides a finished border around the door and covers mounting hardware
• Helps protect door edges from chips, cracks, and sharp exposure
• Aids in retaining adjoining parts (panels, glass, nameplate) per design
• Common signs of wear: cracked or missing trim, loose fit, rattling, visible gaps, cosmetic damage

• Disconnect power to the appliance before servicing; allow any hot surfaces to cool
• Wear cut-resistant gloves—sheet metal edges can be sharp
• Remove the door if required, then remove screws/clips to release the old trim; transfer any reusable hardware from the original assembly
• Align and secure the new trim without overtightening to avoid damage

This snap bushing installs in a door panel opening to protect and guide wiring or tubing that passes through. Replacing a worn or missing bushing helps prevent chafing and pinching, supporting smooth, reliable operation. What it does:

• Snaps into the door panel hole to create a smooth pass-through
• Shields wiring harness or tubing from sharp edges and vibration
• Helps prevent pinched wires, damaged insulation, or leaks due to abrasion
• Common signs include a cracked/missing bushing, chafed wiring/tubing at the door pass-through, or rubbing noises when opening/closing

• 1 snap bushing

• Disconnect power; shut off water supply if applicable
• Depress the old bushing's locking tabs and remove from the door panel opening
• Route the harness/tubing through the new bushing; align and press until it snaps fully into place
• Verify nothing is pinched and restore power/water

The Handle Set Screw is an OEM part for Whirlpool refrigerators. As an internal component, the set screw is used to securely hold refrigerator door handles in place for easy opening and closing of access doors. 

Symptoms of a bad handle set screw include: 

• Handles that spin loose and no longer open doors properly
• Loss of attachment causing handles to fall off doors    
• Potential for handles to fall on feet presenting a safety hazard
• Opening issues, like hands slipping off spinning handles 

Causes involve wear from repeated use or accidental tightening damage stripping threads and allowing handle loosening, affecting usability.

This OEM Whirlpool part is also compatible with some Kenmore and KitchenAid models.