Parts for Kitchenaid KUIS18NNTT1: 02 - Evaporator, Ice Cutter Grid And Water Parts

Fix leaking water or ice machine not filling. This water inlet valve controls water flow into the ice mold. DIY-friendly repair, typically takes 30 minutes.

Replace your ice maker's water distribution tube if cracked, broken, or kinked. Routes water between internal components to restore proper flow.

Replacement screw that secures panels, brackets, and trim to appliance cabinets. Restores reliable hold when original hardware is stripped or missing.

Replace your ice maker's water distribution tube if cracked, broken, or kinked. Routes water between internal components to restore proper flow.

Ice maker not producing ice or evaporator pan bulging? This evaporator requires HVAC certification, vacuum pump, gauges, and refrigerant skills.

Water leaking from bottom of ice maker reservoir? This drain pump removes water during the flush cycle. Moderate DIY repair with tight wire connections.

Plastic water supply line that connects household plumbing to your ice maker. Replace if cracked, pinched, severed, or leaking. 1/4-inch tubing kit.

Replacement fastener nut for securing panels, brackets, and components in various appliances. Needed when original nut is stripped, missing, or corroded.

Maintains precise spacing between components in your ice maker assembly. Replace if worn, missing, or damaged to restore proper part alignment and fitment.

Push-on retainer secures shafts, studs, or trim panels in ice machines. Replace if fastener is missing, bent, or no longer holds components securely.

8-16 thread screw secures panels, brackets, and trim inside refrigerators, dishwashers, and ice makers. Replace if missing, stripped, or damaged.

Fix water leaks or no ice/water dispensing with this ice maker water slide reservoir. Channels water from inlet to dispenser system. DIY-friendly repair.

Ice maker stopped producing ice or leaking inside? This water reservoir tube connects the chilled water reservoir to the dispenser. Moderate DIY repair.

If your ice maker is leaking water or forming ice buildup around the fill area, a cracked or missing overflow tube may be the cause. Simple fix.

Front and rear mounting bracket secures the cutter grid assembly to the ice maker cabinet. Replace if cracked, bent, or missing to restore alignment.

Replacement mounting bracket for ice makers. Secures interior panels and trim for proper alignment. Needed when brackets are broken, cracked, or missing.

Connects the cutter grid to your ice maker's electrical system. Replace if wires are frayed, damaged, or connections are loose or corroded.

Fix poor ice production or uneven cooling caused by a loose evaporator assembly. This support bracket secures the evaporator grid for proper airflow.

Replacement drawer slide guide for ice makers. Aligns and supports sliding bins for smooth operation. Replace if cracked, worn, or causing uneven movement.

Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.

Wire harness for ice makers. Connects electrical components inside the unit. Replace if wires are frayed, damaged, or connectors are broken or melted.

Replace missing or stripped mounting screws in your refrigerator or ice maker. 8-18 x 1 1/4 inch screw secures panels and components inside the unit.

Ice maker not cutting cubes or ice sitting on cutter melting? Replace the cutter grid assembly. Easy 5-10 minute DIY repair—just two screws and two wires.

Replacement cutting grid wire kit for ice makers. Includes 10 feet of wire and screws to restring your grid frame when wire breaks, pits, or wears out.

Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.

Covers and protects the outer edge of your ice machine's cooktop grid. Replace when cracked, warped, or loose to maintain proper seal and stability. Check your model number for fit.

Size: 10-32 x 5/8 inch.

Machine shutting off every few days? Cracked water reservoir causes leaks and safety shutoffs. Moderate DIY—swap pan, pump o-ring, reconnect hoses.

8-18 x 5/8 inch screw for securing control housing, transformer, and thermistor clamp in ice makers. Replace missing or stripped screws during repairs.

Small plastic cap that covers the drain fastener on your ice maker. Shields the screw and surrounding liner from moisture and debris. Replace when cracked or missing.

Push-in nut for ice makers. Secures internal components during assembly and repair. Replace if missing, stripped, or damaged during maintenance work.