Parts for Ikea 90462157B: Fresh Food Door Parts

The Freezer Door Gasket is an OEM replacement part for Frigidaire refrigerators. It creates a seal around the freezer door to maintain a consistent temperature by keeping cold air in and warm air out. This helps ensure proper freezing conditions and prevents energy loss.

Over time, gaskets can degrade due to wear, exposure to extreme temperatures, or cleaning with harsh chemicals. A damaged or worn gasket may fail to seal properly, affecting the freezer's efficiency and potentially leading to increased energy consumption.

Symptoms of a bad gasket include:

• Frost or ice buildup inside the freezer
• Difficulty keeping the freezer door fully closed
• Warm air entering the freezer, causing temperature fluctuations
• Increased energy bills due to inefficient operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This door stop is the replacement part that limits door travel and cushions the refrigerator door for smoother closing and reduced impact. It helps restore proper door alignment and prevents the door from hitting the cabinet. What it does:

• Stops or limits door travel to prevent over-opening and cabinet damage
• Cushions door movement to reduce slamming and wear on hinges
• Helps maintain correct door alignment so the seal engages properly
• Commonly used when the door hangs unevenly, slams, or won't stay aligned

• Disconnect power or unplug the appliance if accessing electrical components is required.
• Support the door or remove it before replacing hinge or stop hardware.
• Basic hand tools usually required; keep track of small screws and clips.
• Test door operation and alignment after installation; adjust as needed.

The Door Stop is an essential OEM replacement part for Frigidaire bottom-mount refrigerators. It functions to securely hold the refrigerator door fully open during loading and unloading of food items. 

Causes of a faulty door stop include cracking or warping due to years of resisting door closure force during access. Friction might also wear down moving lever components over time.

Symptoms of a bad door stop are:

• Refrigerator door unable to safely prop fully open  
• Door slowly closing partially while items are retrieved
• Visible wear marks or loss of lubrication where door pivots

This authentic OEM replacement is compatible for Frigidaire, Electrolux and Kenmore models. 

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

Replace the worn bearing that supports your refrigerator's ice-dispenser auger. This bearing helps the auger spin smoothly so cubes travel to the chute, restoring steady ice dispensing and reducing grinding or jamming.

• Supports the auger shaft within the ice bin/dispenser assembly
• Enables smooth rotation to move ice toward the chute
• Wear can cause slow or failed dispensing and squealing/grinding noises
• Fixes issues with a cracked, worn, or seized auger support

• Disconnect power and remove the ice bin before servicing
• Separate the bin front/cover and auger assembly; note the bearing's orientation
• Transfer the new bearing and reuse existing screws/retainer if present
• After reassembly, confirm the auger turns freely by hand before restoring power

This retainer is a small mounting clip that secures interior components so they stay in place and operate reliably. It prevents parts from shifting or rattling during normal use and restores proper alignment. What it does:

• Holds trim, shelves or small appliance components securely to the cabinet or frame
• Prevents rattling, movement, or dislodging of the secured part
• Helps maintain correct alignment for smooth operation
• Common symptom: loose or wobbling trim, shelf, or component that won't stay seated

• Retainer mounting clip

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate hand tools; this part typically snaps or slides into place but may require a screwdriver or nut driver
• Inspect mating surfaces and surrounding fasteners; replace any damaged clips or broken mounting features

The Door Bin is an OEM part for Frigidaire refrigerators. It is designed to hold small items like eggs, butter, yogurt, or condiments directly within the refrigerator door. The door bin allows for organization of frequently accessed items in a compact storage shelf within easy reach.

Causes of a bad door bin include general wear and tear over extended use, accidental impacts that crack or damage the plastic, or mounting hardware that corrodes over time and interferes with proper movement.

Symptoms of a bad door bin can include:

• Cracks or breaks in the plastic
• Worn mounts that no longer securely hold the bin in  

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This refrigerator door bin mounts on the inner door to hold bottles and condiments securely. Replace a cracked or missing bin to restore storage capacity and keep items from tipping or falling when you open the door.

• Provides on-door storage for bottles, jars, and small items
• Attaches to molded tabs on the door liner to stay in place
• Common symptoms: cracked or broken plastic, bin falls off or won't seat, missing bin
• Restores original door storage capacity and organization

• Remove contents and lift the old bin straight up and out of the door liner slots
• Align the new bin in the same location; hook rear edges first, then press down until fully seated
• If plastic is cold, let it warm to room temperature before installation to reduce the chance of cracking
• Verify placement matches your model's diagram; do not force or overload

This refrigerator door shelf bin mounts to the inner door liner to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore organized on-door storage and keep frequently used items within easy reach. What it does:

• Provides on-door storage for beverages, condiments, and small containers
• Helps keep items upright and accessible
• Restores capacity when the original bin is cracked or missing
• Common symptoms: broken or warped plastic, broken mounting tabs, bin won't stay seated or falls off

• 1 door bin

• Empty the old bin and lift up to release it from the door liner tabs
• Align the new bin with the same tabs and press down until fully seated
• Do not force; confirm you're using the correct location/style for your model
• No tools typically required; handle plastic edges carefully

Replacement door bin for the refrigerator door. This snap-in shelf restores secure, organized storage on the door so bottles, condiments, and small items stay in place and easy to access.

• Holds items on the refrigerator door; also called a door shelf or rack
• Replaces cracked, broken, or missing bins
• Helps prevent items from tipping or falling when the door opens
• Common symptoms: bin won't stay seated, broken tabs, sagging, or lost door storage

• Remove contents from the old bin; lift it up and off the door mounting tabs
• Align the new bin with the same slots and press down until it clicks firmly into place
• Match the bin to the correct door position—some models use different-width bins by location
• Handle cold plastic gently; let it warm to room temperature to reduce the chance of cracking

The Door Bin is an OEM part for Frigidaire refrigerators. This bin is designed to fit securely on the refrigerator door, providing convenient storage for bottles, jars, and other items. It helps maximize the use of space within the refrigerator, allowing for better organization and accessibility of frequently used products.

Over time, door bins can become damaged or worn out due to regular use, overloading, or accidental impacts. Common causes of a bad door bin include cracks, breaks, or the plastic becoming brittle and snapping off.

Symptoms of a bad door bin include:

• Cracks or breaks in the plastic
• Difficulty in securely attaching the bin to the door
•  Items falling out of the bin
• Reduced storage capacity on the refrigerator door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Bin is an OEM replacement part for Frigidaire refrigerators. The door bin is responsible for organizing smaller items and optimizing interior space utilization. It measures approximately 5" depth x 12 1/2" width x 3" height.

Causes of a bad door bin can include damage such as cracks or breaks in the plastic, broken adjustable shelves, or issues with the mounting brackets that secure it inside the refrigerator door. 

Symptoms of a bad door bin include:

• Items falling out of the bin due to structural integrity issues
• Difficulty accessing storage areas due to broken shelving  
• The bin not sitting securely inside the door

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This Door Bin is an OEM part for Frigidaire refrigerators. This bin is located on the interior side of the refrigerator door, providing convenient storage space for items such as bottles, jars, and condiments. It helps keep the refrigerator organized and maximizes available storage.

Causes of a bad door bin can include wear and tear, accidental damage, or improper handling.

Symptoms of a bad door bin may include:

• Cracks or breakage in the bin
• Difficulty in securely holding items
• Limited storage capacity due to a damaged or missing bin

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part number contains one (1) screw.

The Door Handle Screw is an OEM part for Frigidaire refrigerators. This screw secures the door handle to the refrigerator door, ensuring a firm and stable grip for opening and closing the door.

Causes of a bad door handle screw can include regular wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or stripping. A faulty screw can lead to a loose or wobbly door handle, making it difficult to operate the refrigerator.

Symptoms of a bad door handle screw include:

• The door handle feeling loose or coming off
• Difficulty in securely tightening the handle
• Visible rust or corrosion on the screw
• Stripped threads on the screw or handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Hinge Pin is an OEM part for Frigidaire refrigerators. It is responsible for supporting the mullion or flapper, which is the vertical strip that divides the refrigerator doors. It provides smooth movement and proper alignment of the mullion, allowing it to pivot easily for access to both compartments while maintaining an airtight seal when closed.

Causes of a bad hinge pin can include wear and tear over time, accidental damage, or improper handling. A damaged or worn-out hinge pin may result in difficulties in opening or closing the mullion.

Symptoms of a bad Hinge Pin include:

• Difficulty in opening or closing the doors
• Excessive play or wobbling of the mullion
• Failure to maintain a proper seal between door
• Unusual noises during use

This OEM Frigidaire part can also be used on select Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore models.

This replacement guide aligns and supports a moving component so it travels on its intended path without binding. Replacing a worn or broken guide restores smooth operation and helps prevent scraping, jamming, or premature wear of connected parts.

• Keeps the associated rack, drawer, or panel centered and properly aligned during movement
• Provides a track/stop for the mating part to follow
• Reduces friction and noise for smoother sliding
• Typical failure signs: sticking, uneven travel, scraping noises, or visible cracks/broken tabs

• Disconnect power; also shut off water or gas
• Remove the associated assembly to access the guide and note its orientation
• Reuse original screws/clips and tighten securely without overtightening
• Test movement after installation; replace worn mating rails or rollers if needed

The Mullion is an OEM part for Frigidaire refrigerators. It is situated between the freezer and refrigerator doors to separate the two compartments. The mullion provides structure, sealing the doors against air and temperature leakage.

Causes of a bad mullion can include wear and tear over time, damage from frequent door opening and closing, or impact damage.

Symptoms of a bad mullion include:

• Air and temperature leakage between compartments
• Difficulty closing one or both doors securely
• Gaps or cracks seen around the mullion frame
• Scratches, dents or other physical damage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Flapper Door Center Hinge is an OEM part for Frigidaire refrigerators. This hinge is essential for the proper operation of the flapper door, which helps seal the gap between the refrigerator doors when they are closed, ensuring efficient cooling and energy use.

Over time, the center hinge can wear out or become damaged due to regular opening and closing of the refrigerator doors. Accumulation of dirt, dust, or debris, as well as physical impact, can also contribute to hinge failure.

Symptoms of a bad flapper door center hinge include:

• The flapper door not closing properly
• Gaps between the refrigerator doors
• Increased energy consumption due to cold air escaping
• The refrigerator doors not aligning correctly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This small rubber door bumper cushions and aligns the refrigerator door to reduce slamming and wear. It restores smooth closing and helps keep the door sealed for proper cooling. What it does:

• Absorbs impact when the door closes to prevent hard bangs and protect cabinet surfaces
• Keeps the door properly spaced to help maintain a consistent seal
• Reduces rattling or vibration caused by loose or worn bumpers
• Simple, low-profile part used at door contact points or stops

• One replacement bumper

• Power is off if working near electrical components; follow appliance safety precautions
• Remove the old bumper by pulling it from its mounting hole; press the new bumper firmly into place until seated
• Use gloves to protect your hands; avoid using excessive force or tools that could damage trim
• Replace with the exact OEM part number for proper fit and function

This genuine replacement screw secures appliance components and restores proper fit and stability. Use it to replace a missing or damaged fastener and stop panels, trim, or parts from shifting or rattling during normal use. What it does:

• Fastens and holds panels, brackets, or small components in place
• Restores secure attachment when an original screw is missing, damaged, or stripped
• Helps eliminate vibration, rattling, or loose-fitting parts
• Matches the OEM fit and function for reliable reassembly

• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and remove food or contents from appliance areas as needed before servicing
• If fastener threads are damaged, replace with the exact OEM screw rather than forcing installation

This wire harness is an electrical connector assembly that links appliance components so circuits can carry power and signals. It helps restore reliable electrical connections and proper operation when the original harness is damaged or worn. What it does:

• Provides factory-style electrical connections between components to enable power and signal flow
• Replaces frayed, broken, or corroded wiring that can cause intermittent operation
• Helps stop symptoms like components that won't power on, erratic cycles, or loss of function traced to wiring
• Maintains correct connector fit and routing for safe, reliable performance

• One wire harness assembly as pictured

• Disconnect all power to the appliance before starting any repair
• Compare the replacement harness to the original to ensure connectors, length, and routing
• Route harness to avoid sharp edges, heat sources, and moving parts; secure with factory clips or ties

A replacement inner cabinet liner that restores the smooth, sealed interior surface of the refrigerator compartment for proper food storage and easy cleaning. Replaces cracked, stained or warped liners to reduce leaks and odors. What it does:

• Provides the finished interior surface that holds shelves, bins and drawers in place
• Restores a watertight, easy-to-clean surface to prevent pooling and mold growth
• Stops drafts and insulation exposure caused by cracks or delamination
• Helps maintain proper airflow and temperature distribution inside the cabinet

• Disconnect power and remove all food, shelves and drawers before starting.
• Handle carefully to avoid cracking the new liner during installation.
• Follow OEM instructions.

This Mullion harness routes electrical connections through the refrigerator door mullion so lights, sensors and control/LED assemblies communicate with the main cabinet wiring. It restores reliable power and signal routing in the door center strip. What it does:

• Carries power and signal between the door/mullion components and the main harness
• Restores non-functioning mullion lights, LEDs or control communication caused by a damaged harness
• Prevents intermittent connections from frayed or broken mullion wiring
• Used when visible wire damage or connector failure is found in the mullion area

• One (1) mullion harness as pictured

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove the mullion/door trim and any gaskets per service instructions to access the harness
• Inspect connectors and wire routing; replace any clips or retainers to prevent pinching

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required