Parts for Frigidaire FG4H2272UF: Fresh Food System / Middle Drawer Air Flow Parts

The Frigidaire PureSource Ultra II Refrigerator Water & Ice Filter is an OEM part for Frigidaire refrigerators provides clean, fresh-tasting water and ice. This advanced filtration system is specifically engineered to remove impurities and contaminants from your water supply, including lead, chlorine, mercury, and certain pesticides, without removing beneficial fluoride. 

Regular replacement of the water and ice filter is crucial for maintaining the quality of your drinking water and the efficiency of your refrigerator's water and ice dispensing system. Over time, filters can become saturated with contaminants, reducing their effectiveness and potentially impacting the taste and safety of your water.

Symptoms of a filter in need of replacement include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in the water and ice
• The refrigerator's water filter indicator light turning on

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This is a replacement mounting screw used to secure appliance panels and small components so parts stay firmly in place during normal use. Installing the correct screw restores proper fit and reduces rattles or loose trim. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces a lost or stripped screw to restore secure attachment
• Helps maintain safe, stable operation by holding parts where they belong

• One replacement mounting screw

• Disconnect power and water before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can damage threads or panels
• Keep removed fasteners organized so you reinstall them in the original locations

The Thermostat Kit is an OEM part for Frigidaire refrigerators. It regulates interior temperature conditions. The thermostat monitors and controls cooling functions to maintain even temperatures for food storage.  

Causes of a bad thermostat can include a gradual loss of calibration or component failure over many cooling cycles. Temperature swings, increased energy use, and icing/freezing issues may result. Exposure to moisture or humidity could also compromise insulation and wiring.

Symptoms of a faulty thermostat include:  

• Inconsistent or fluctuating interior temperatures
• Difficulty maintaining the temperature setting  
• Frost or ice buildup inside the fridge or freezer
• The compressor running constantly without adequate cooling

This OEM replacement is compatible with Electrolux, Gibson, Kelvinator, and Kenmore brands as well. 

This defrost heater melts frost and ice that builds on the evaporator to help restore normal airflow and cooling. Replacing a failed heater prevents ice buildup and reduces frost-related temperature issues in the freezer compartment. What it does:

• Warms the evaporator coil during the defrost cycle to remove accumulated frost and ice
• Helps maintain proper airflow and consistent cooling when functioning correctly
• Common symptoms of failure: heavy frost on the evaporator, reduced cooling, or a freezer that runs continuously
• Works with the refrigerator's defrost system (timer/thermostat/control) — replace faulty system components as needed

• Unplug the appliance and shut off power before starting any repair
• Access typically requires removing the evaporator cover in the freezer; handle the evaporator and fins carefully to avoid damage
• Inspect and/or test the defrost thermostat/bi-metal and control components when replacing the heater

This baffle assembly replaces a damaged or missing dryer drum baffle to restore proper tumbling and airflow. It helps keep clothes separated and supports even drying performance. What it does

• Directs airflow and circulation inside the dryer drum for more consistent drying
• Lifts and tumbles clothes so items dry evenly and avoid bunching
• Reduces drum contact noise from loose or broken baffles
• Prevents garments from getting trapped behind the drum where applicable

• Disconnect power (and gas supply, if applicable) before starting any repair
• Access requires removing the dryer cabinet or drum per your model's service instructions
• Typical tools: screwdriver or nut driver; follow OEM instructions for fastener torque and alignment

This cover assembly replaces the plastic trim that surrounds the refrigerator dispenser and keeps the dispenser area looking finished and protected from everyday wear. Restores proper appearance and helps prevent debris from reaching internal components. What it does:

• Replaces cracked, broken or missing dispenser trim to restore a clean, finished look
• Helps shield the dispenser opening from spills and debris that can affect operation
• Supports mounting for dispenser controls or actuator components
• Can stop light drafts and reduce moisture exposure around the dispenser area

• One cover assembly

• Disconnect power to the appliance before beginning work to avoid electrical shock
• Remove dispenser front panel or bezel per your model's service instructions to access mounting screws/clips
• Use basic hand tools (screwdriver, nut driver) and handle plastic parts gently to avoid damage

This heater assembly restores the dryer's heating function so loads dry efficiently. It replaces a worn or failed heating module and fits into the dryer's heating housing for reliable warm airflow. What it does

• Produces the heated air needed to dry clothes during a normal cycle
• Common failure signs: dryer tumbles but clothes remain damp or drying takes much longer
• Restores proper heat output when the original heater element or assembly has failed
• Works with the dryer's controls and safety thermostats to regulate temperature

• Disconnect power before beginning service; this is an electrical heating component
• Handle carefully to avoid damage to the element and sharp sheet-metal edges
• After installation, test dryer operation on a short cycle to confirm proper heating

The Thermistor is an OEM part for Frigidaire refrigerators and freezers, designed to accurately monitor and control the temperature within the appliance. This sensitive component reacts to temperature changes by altering its resistance, providing feedback to the control board to regulate the cooling and defrost cycles.  

Causes of thermistor failure can include physical damage, electrical failures within the circuit, or aging, which affects its accuracy and responsiveness.

Symptoms of a bad Thermistor include:

• Unusual temperature fluctuations in the refrigerator or freezer
• The appliance is constantly running or not cooling efficiently
• Error codes displayed on the refrigerator's control panel indicating thermistor problems
• Buildup of frost in the freezer or condensation in the fridge

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Air Filter is an OEM part for Frigidaire refrigerators designed to keep the air inside your refrigerator fresh by reducing odors and filtering out unwanted smells, ensuring that the air circulating within your fridge remains clean and fresh. The filter is easy to install and is recommended to be replaced every six months to maintain optimal freshness.

Symptoms of a bad Air Filter include:

• Persistent odors despite cleaning.
• Increased buildup of odors.
• Noticeable decrease in the freshness of stored food.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This evaporator coil circulates cold refrigerant to absorb heat inside the freezer compartment, restoring proper cold temperatures and efficient operation. Replace a damaged or corroded evaporator to stop frost buildup and improve cooling consistency. What it does:

• Absorbs heat from the freezer compartment so the fridge can maintain cold temperatures.
• Circulates refrigerant as part of the sealed cooling system.
• Common symptoms of a failing evaporator: excessive frost or ice on the evaporator, reduced or uneven cooling, and long run times for the compressor.
• Works with the freezer's defrost system; severe corrosion or leaks will compromise defrost and cooling.

• One evaporator coil assembly.

• Disconnect power before beginning any repair and follow basic electrical safety.
• Inspect and clear the defrost drain and surrounding gaskets while the freezer is open; replace any damaged fasteners or insulation as needed.
• Test the appliance after installation and monitor for proper defrost cycles and cooling before returning to normal use.

This cover assembly replaces a damaged or missing cabinet cover to restore the appliance's exterior protection and appearance. It keeps internal components shielded and helps maintain proper airflow and safety. What it does:

• Protects internal components from dust, debris, and accidental contact
• Restores a secure exterior fit when the original cover is cracked, bent, or broken
• Helps reduce rattling or vibration caused by a loose or damaged cover
• Preserves the appliance's finished appearance for normal operation and cleaning

• One cover assembly as shown

• Disconnect power (unplug or shut off circuit breaker) before starting any service
• Remove any adjacent panels or trim per the model's service instructions to access mounting screws
• Handle part carefully to avoid scratching the finish; use proper fasteners and torque to OEM recommendations

This cover assembly replaces a damaged or missing cabinet cover to restore the appliance's exterior protection and appearance. It keeps internal components shielded and helps maintain proper airflow and safety. What it does:

• Protects internal components from dust, debris, and accidental contact
• Restores a secure exterior fit when the original cover is cracked, bent, or broken
• Helps reduce rattling or vibration caused by a loose or damaged cover
• Preserves the appliance's finished appearance for normal operation and cleaning

• One cover assembly as shown

• Disconnect power (unplug or shut off circuit breaker) before starting any service
• Remove any adjacent panels or trim per the model's service instructions to access mounting screws
• Handle part carefully to avoid scratching the finish; use proper fasteners and torque to OEM recommendations

The Fan Assembly is an OEM part for Frigidaire refrigerators. It is a crucial component that circulates cool air throughout the refrigerator, ensuring proper temperature regulation and maintaining food freshness.

A bad fan assembly can be caused by wear and tear, motor failure, or blockage. Signs of a faulty assembly include an increase in temperature inside the refrigerator, unusual noises coming from the fan, or poor cooling performance.

Symptoms of a bad fan assembly can include:

• An increase in temperature 
• Unusual noises coming from the fan 
• Poor airflow and uneven cooling

Replace your damaged or malfunctioning fan assembly with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This cover assembly replaces a damaged or missing cabinet cover to restore the appliance's exterior protection and appearance. It keeps internal components shielded and helps maintain proper airflow and safety. What it does:

• Protects internal components from dust, debris, and accidental contact
• Restores a secure exterior fit when the original cover is cracked, bent, or broken
• Helps reduce rattling or vibration caused by a loose or damaged cover
• Preserves the appliance's finished appearance for normal operation and cleaning

• One cover assembly as shown

• Disconnect power (unplug or shut off circuit breaker) before starting any service
• Remove any adjacent panels or trim per the model's service instructions to access mounting screws
• Handle part carefully to avoid scratching the finish; use proper fasteners and torque to OEM recommendations