Parts for Frigidaire FG4H2272UF: Shelves Parts

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

The Frigidaire PureSource Ultra II Refrigerator Water & Ice Filter is an OEM part for Frigidaire refrigerators provides clean, fresh-tasting water and ice. This advanced filtration system is specifically engineered to remove impurities and contaminants from your water supply, including lead, chlorine, mercury, and certain pesticides, without removing beneficial fluoride. 

Regular replacement of the water and ice filter is crucial for maintaining the quality of your drinking water and the efficiency of your refrigerator's water and ice dispensing system. Over time, filters can become saturated with contaminants, reducing their effectiveness and potentially impacting the taste and safety of your water.

Symptoms of a filter in need of replacement include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in the water and ice
• The refrigerator's water filter indicator light turning on

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This replacement cover restores the appliance's exterior appearance and helps protect internal components from dust and debris. It fits over the designated cabinet area for a finished, safe look. What it does:

• Protects internal parts from dust, moisture, and accidental contact
• Restores a clean, finished exterior where the original cover is dented, cracked, or missing
• Helps keep wiring and components concealed and secured
• Prevents small objects from entering service areas

• Disconnect power (and water, if applicable) before starting any repair
• Remove any adjacent trim or retaining fasteners to access the cover
• Use appropriate hand tools and avoid over-tightening fasteners

This water tank assembly is the molded reservoir that stores and supplies water for the appliance's dispenser and ice-making system, restoring proper water flow and reducing leaks from a damaged reservoir. What it does:

• Holds and delivers water to the dispenser and/or ice maker as part of the unit's water system
• Replaces cracked, warped, or leaking reservoirs that cause visible leaks
• Restores normal water flow when a damaged tank prevents dispensing or filling
• Helps resolve intermittent filling or low-water symptoms related to the reservoir itself

• Disconnect power and shut off the water supply before starting work
• Handle the reservoir carefully to avoid damage to fittings and seals
• Replace any worn gaskets or hoses and test for leaks after installation

This replacement rail is the sliding track that supports and guides a refrigerator drawer for smooth opening and closing. Restores proper alignment and helps prevent sticking, binding or drawers coming off the track. What it does:

• Provides a stable track for a refrigerator or freezer drawer to slide in and out smoothly
• Keeps the drawer aligned to prevent scraping or binding against the cabinet
• Helps stop drawers from falling forward or detaching when pulled
• Replaces worn or damaged rails that cause rough or uneven drawer movement

• Disconnect power and remove contents before working on refrigerator drawers
• Often accessed by removing the drawer and/or inner liner; basic hand tools may be required
• Reinstall drawer and test operation; ensure rail is seated and aligned before use

This shelf assembly is a direct-fit replacement refrigerator shelf that restores level storage and usable space. The glass surface is easy to clean and provides a stable platform for food containers. What it does:

• Replaces a cracked, chipped or missing refrigerator shelf to restore storage and organization
• Supports food containers, beverages and deli items on a flat, easy-to-clean surface
• Helps prevent spills from spreading to lower compartments when contained on the glass
• Fits into factory shelf tracks to sit securely and level inside the fresh-food compartment

• Remove all items from the refrigerator and set them aside before installing
• Slide old shelf out straight; align new shelf with side tracks and slide in until fully seated
• Use two hands when handling glass to avoid dropping; wear gloves to protect hands
• Inspect shelf supports/rails for damage and replace if worn to ensure secure fit

This mounting bracket secures a refrigerator component to restore proper alignment and reduce movement. It provides a simple, reliable replacement to stop rattling or sagging where a worn or broken bracket is the cause. What it does

• Provides a fixed mounting point to hold panels or internal components securely in place.
• Restores proper alignment to parts that have become loose, preventing rubbing or mis-seating.
• Helps eliminate noises caused by a loose or broken support.
• Suitable when the original bracket is cracked, bent, or missing.

• Disconnect power to the appliance before starting any repair to avoid electrical or mechanical hazards.
• Basic hand tools are typically required; use appropriate fasteners as originally supplied.
• Keep small parts and fasteners secure during removal/installation.

This is a replacement mounting screw used to secure appliance panels and small components so parts stay firmly in place during normal use. Installing the correct screw restores proper fit and reduces rattles or loose trim. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces a lost or stripped screw to restore secure attachment
• Helps maintain safe, stable operation by holding parts where they belong

• One replacement mounting screw

• Disconnect power and water before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can damage threads or panels
• Keep removed fasteners organized so you reinstall them in the original locations

This membrane assembly is the flexible control panel layer that registers button presses and protects the underlying electronics, restoring reliable touch response and control readability on the appliance. Ideal when buttons are unresponsive or worn. What it does:

• Replaces the soft-touch keypad layer so button presses register correctly
• Protects the circuit board from spills, dust, and everyday wear
• Restores tactile feedback and improves visibility of control legends
• Can resolve intermittent or non-responsive control panel behavior

• Disconnect power to the appliance before replacing the membrane to avoid shock or damage
• Handle gently to avoid creasing or contaminating the adhesive surface
• Align carefully to ensure full button contact and proper fitment

This is a replacement refrigerator door gasket that helps restore a tight seal to the door, improving temperature control and reducing frost buildup and energy loss. What it does:

• Seals the refrigerator door edge to keep cold air in and warm, moist air out
• Helps prevent frost buildup and excessive compressor runtime
• Can resolve symptoms like warm interior temps, visible gaps when door is closed, or moisture/ice along the door seal
• Restores proper door closing and magnetic seal engagement when undamaged

• Disconnect power or unplug the appliance before servicing to avoid electrical hazard
• Remove the old gasket completely, clean the gasket channel, and press the new gasket into the channel evenly
• Verify the gasket is fully seated around the door and check for uniform contact when the door is closed
• Follow the manufacturer's instructions carefully

The Drawer Assembly is an OEM part for Frigidaire refrigerators. It is the interior storage compartment located in the main refrigerator area. The drawer assembly provides additional shelf space for organized item storage.

Causes of a bad drawer assembly can include broken slides or rollers that affect opening and closing, broken mounting brackets, or a warped or damaged drawer base.

Symptoms of a bad drawer assembly include:

• The drawer failing to fully open or close correctly
• Excessive noise and vibration when maneuvering the drawer
• Items inside tipsing or falling over due to a lack of stability
• Difficulty removing or replacing the entire drawer compartment

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This cover is an access panel that protects internal oven/range components and keeps wiring and controls out of sight. It restores a clean finished appearance and helps prevent dust and debris from entering sensitive areas. What it does

• Shields control housing and internal components from spills, dust, and accidental contact
• Helps keep wiring and electrical connections covered and tidy
• Replaces cracked, broken or missing trim that exposes underlying parts
• Restores proper fit and finish to the appliance exterior

• Disconnect power to the appliance before attempting any service to avoid shock.
• May require basic tools (screwdriver) to remove fasteners and secure the replacement.
• Handle carefully to avoid scratching the finish; verify fasteners and alignment before tightening.

This guide helps the refrigerator/freezer drawer open and close smoothly while keeping the drawer aligned. It restores proper drawer movement and reduces rubbing, sticking, or uneven travel for a more reliable storage experience. What it does:

• Guides the drawer along its track to ensure smooth, straight travel
• Prevents drawer from binding, catching, or coming off the track
• Maintains proper drawer alignment and load support during operation
• Reduces noise and wear caused by misaligned or damaged guides

• Disconnect power before servicing to avoid electrical hazards where applicable
• Remove the drawer completely to access the guide; installation generally requires basic hand tools
• Inspect mating track and hardware; replace any worn screws or clips for secure fit

This manifold routes and distributes supply within the appliance to the connected components. Replacing a cracked or leaking manifold restores proper flow and helps maintain safe, reliable operation across the system.

• Channels supply from the inlet to multiple connection points
• Provides threaded ports for model-specific fittings and connections
• Helps maintain consistent flow to downstream components
• Typical failure signs: leaks, visible cracks, stripped threads, or multiple components not receiving supply

• Disconnect power and shut off the appliance's supply before servicing.
• Access and replace the manifold per your model's service instructions; transfer any brackets or fittings from the original as required.
• Use manufacturer-approved sealants only where specified; do not overtighten threaded joints.
• Restore supply and check every connection for leaks before returning the appliance to service.

The Frigidaire PureSource Ultra II Refrigerator Water & Ice Filter is an OEM part for Frigidaire refrigerators provides clean, fresh-tasting water and ice. This advanced filtration system is specifically engineered to remove impurities and contaminants from your water supply, including lead, chlorine, mercury, and certain pesticides, without removing beneficial fluoride. 

Regular replacement of the water and ice filter is crucial for maintaining the quality of your drinking water and the efficiency of your refrigerator's water and ice dispensing system. Over time, filters can become saturated with contaminants, reducing their effectiveness and potentially impacting the taste and safety of your water.

Symptoms of a filter in need of replacement include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in the water and ice
• The refrigerator's water filter indicator light turning on

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Water Inlet Valve is an OEM part for Frigidaire refrigerators featuring dispensed water and ice. Located inside the cabinet behind the exterior paneling, the inlet valve controls flow into the water filtration system and ice maker assembly. 

Symptoms of a bad inlet valve include:

• Erratic dispenser water flow rates  
• Ice maker failures or water leaks inside cabinet
• Mineral accumulation inside filter chamber  
• Inability to regulate consistent temperature/pressure

Causes of a bad valve can be worn diaphragms, obstructed ports, or damage from mineral buildup over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This water tank assembly is the molded reservoir that stores and supplies water for the appliance's dispenser and ice-making system, restoring proper water flow and reducing leaks from a damaged reservoir. What it does:

• Holds and delivers water to the dispenser and/or ice maker as part of the unit's water system
• Replaces cracked, warped, or leaking reservoirs that cause visible leaks
• Restores normal water flow when a damaged tank prevents dispensing or filling
• Helps resolve intermittent filling or low-water symptoms related to the reservoir itself

• Disconnect power and shut off the water supply before starting work
• Handle the reservoir carefully to avoid damage to fittings and seals
• Replace any worn gaskets or hoses and test for leaks after installation

This water tank assembly is the molded reservoir that stores and supplies water for the appliance's dispenser and ice-making system, restoring proper water flow and reducing leaks from a damaged reservoir. What it does:

• Holds and delivers water to the dispenser and/or ice maker as part of the unit's water system
• Replaces cracked, warped, or leaking reservoirs that cause visible leaks
• Restores normal water flow when a damaged tank prevents dispensing or filling
• Helps resolve intermittent filling or low-water symptoms related to the reservoir itself

• Disconnect power and shut off the water supply before starting work
• Handle the reservoir carefully to avoid damage to fittings and seals
• Replace any worn gaskets or hoses and test for leaks after installation