Parts for Ge CGP350SET3SS: Gas & Burner Parts

Fix uneven flames or poor burner performance with this cooktop burner orifice spud. Controls propane gas flow for correct flame size. Direct-fit part.

Fix weak flames or ignition problems with this LP gas orifice spud. Controls propane flow to restore proper burner performance. Simple 10-minute fix.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

Weak or uneven oven flame? This orifice spud secures the gas orifice to your burner tube, restoring proper gas flow and steady combustion in gas ovens.

Plugged orifice causing ignition problems? This LP gas orifice regulates propane flow to your cooktop burner for proper flame size and reliable ignition.

Gas burner won't light or flame is uneven? This orifice spud secures the burner orifice to direct fuel properly for consistent ignition and flame control.

Simmer burner won't maintain low flame? This orifice spud restores proper gas flow for gentle, even cooking on low heat. Direct-fit part for gas cooktops.

If your cooktop buzzer won't stop sounding or has gone silent, this 120V buzzer restores audible alerts for cycle completion and user notifications.

Secures your cooktop to the cabinet or countertop. Replace if bent, broken, or missing to prevent movement and restore a stable, factory-secure fit.

Foam seal tape creates an airtight barrier between your cooktop and countertop. Replace if damaged, compressed, or causing gas odors. Verify fit with model.

Fix a cracked or broken control switch bezel that leaves your cooktop looking worn. This switch cover restores appearance and protects switches from debris.

Burner not igniting or flame uneven? This cooktop burner tube assembly delivers gas to the burner head. Moderate install, typically 30-45 minutes.

Fix uneven flames or burner not igniting with this cooktop burner tube assembly. Restores proper gas flow to burner heads for consistent heating.

Burner won't light or flames are uneven? This cooktop burner tube assembly delivers gas from the valve to the burner head. Moderate DIY repair.

Controls incoming gas pressure for your cooktop. Replace if cracked, broken, or missing. Installs at the gas line connection point at the unit base.

Fix burners that won't ignite or turn off with this cooktop gas valve. Controls gas flow to burners for safe cooking. Moderate DIY repair, 30-45 minutes.

Fixes knob won't turn or turns freely without resistance. Controls gas flow to burners. Moderate difficulty repair, requires cooktop disassembly.

The Dual Valve is an OEM part for GE gas cooktops. It is a key component responsible for controlling the flow of gas to the dual burner.

Causes of a bad dual valve can include wear and tear over time, freezing or other weather damage, or issues from debris buildup or clogging.

Symptoms of a bad dual valve include:

• Inability to turn burners on or off
• Burners that will not light or that light but with an unstable flame
• Inconsistent or irregular flame size that cannot be controlled
• Gas leaks from the valve area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Center burner not heating? This dual burner valve controls gas flow to your cooktop's power boil element. Direct-fit part restores even heating.

Burner knob hard to turn or flame won't adjust? This gas valve controls flow to the burner. Moderately difficult repair restores smooth operation.

The Spark Module is an OEM part for GE cooktops. Located within the cooktop's control unit, this module is responsible for generating electric sparks to ignite the burners. Consisting of electronic components and wiring, the spark module works with other systems to reliably and safely light the gas or electric burners.  

Symptoms of a bad spark module include:

• Burners not lighting or lighting intermittently  
• Repeated flashing of the burner indicator lights  
• Clicking or buzzing sounds coming from the control unit

Causes of a failed spark module can be exposure to moisture, dust or debris accumulating inside the control unit over time as well as mechanical or electrical degradation of the ignition components.

This genuine OEM GE replacement part is also compatible with some Kenmore cooktop models that use GE's control systems.

Fix a blank or unresponsive cooktop display with this LED control board. Restores electronic controls and temperature indicators when your display fails.

If your cooktop controls won't respond or indicator lights stay on constantly, this wire harness restores electrical connections between the control board and components.

Right angle

Gas cooktop supply inlet connects your gas line to the burner manifold. Essential for proper gas flow and pressure. Moderate DIY repair in 30-45 minutes.

Manifold seal prevents gas leaks at the valve connection. Replace if damaged, cracked, or during valve service. Confirm fit with your cooktop model number.

Manifold bracket assembly for cooktops. Secures the gas manifold to the frame. Replace if bracket is cracked, broken, or damaged during servicing.

Fix uneven flames or gas flow issues with this cooktop manifold tube. Essential gas distribution component. Moderate difficulty installation.

Replace your cooktop's griddle burner tube assembly if the griddle isn't heating evenly or won't light. Includes complete tube assembly for reliable heat.

Replacement power cord for cooktops. Connects your cooktop to the electrical outlet. Replace if cord is frayed, damaged, or missing for safe operation.

Replacement mounting screw for appliances. Secures components and reduces vibration. Needed when original screws are missing, stripped, or damaged.

Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Black hex washer screw for securing range components like door trim, control panels, and internal brackets. Replace missing or stripped screws during repairs.

Fix burners that won't heat or ignite with this cooktop burner wire harness. Restores electrical connection to gas burners. Moderate DIY repair.

If your cooktop burner won't ignite or heat properly, a faulty wire harness may be the cause. This part connects power to the burner assembly.