Parts for Ge PGB945SEF1SS: Gas & Burner Parts

This LP conversion kit converts a compatible gas range/oven from natural gas to liquid propane, supplying the correct fuel orifices and components needed for safe LP operation when installed per manufacturer instructions. What it does:

• Replaces orifice and regulator components used to adapt the appliance for propane fuel
• Ensures correct fuel flow and burner operation after switching to LP
• Helps address improper burner flames or ignition issues caused by incorrect fuel orifice sizing
• Required when changing the appliance fuel type to meet safe operating specifications

• LP conversion components required for conversion

• Turn off gas supply and power before starting; follow OEM conversion instructions exactly
• After installation, perform a thorough leak test and verify proper burner flames and operation
• Retain OEM documentation and apply any required fuel-type labeling to the appliance

Stainless steel cleaner for gas ranges and cooktops. Restores shine and removes fingerprints, smudges, and streaks from exterior surfaces.

Replacement control knob for your range cooktop. Installs on the control panel to adjust burner temperature settings. Order when original is cracked, broken, or finish has peeled off.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

Phillips head mounting screw for range control knobs and switches. Replaces lost, stripped, or damaged screws. 8-32 thread size for secure installation.

Small mounting bracket secures components beneath your cooktop surface. Replace if damaged, bent, or missing to restore proper alignment and stability.

Secures the electronic board or module inside your cooktop. Replace if the bracket is cracked, bent, or missing to prevent component movement and wiring issues.

Fix improper flames or weak ignition on your range burner with this LP orifice spud. Meters propane flow for correct flame size and safe operation.

Fixes weak or uneven flames on LP gas ranges. This orifice spud meters propane flow to the burner. Easy DIY install restores proper flame size.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

Oven not heating evenly or taking too long to bake? This bake burner assembly restores consistent heat distribution for proper cooking performance.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Replace your range's burner injector assembly if cracked, clogged, or missing. This component connects the gas supply to the burner for proper operation.

Protective shield that covers the oven igniter. Replace if cracked, broken, or missing to shield the igniter from spills, drips, and falling debris.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

Fix burners that won't light, stay on high, or produce uneven flames with this range burner valve assembly. Controls gas flow for precise heat levels.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

If your gas burner won't turn off completely or won't ignite, this burner valve assembly controls gas flow to individual burners for precise heating.

Fix uneven simmer heat or burner flame issues with this range dual valve tube. Connects gas supply to simmer burners for precise low-heat control.

Replace a faulty range main dual valve tube if burners won't light or gas flow is uneven. Connects gas supply to dual burner valves. Moderate DIY repair.

Fix weak flames or uneven heating with this range top burner assembly. Direct replacement for gas range cooktops. Moderate DIY repair in 30-45 minutes.

10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Fix gas smell or yellow flames on your range burners with this valve control assembly. Regulates gas pressure and flow for safe, reliable ignition.

Fix an oven that won't light or heat with this igniter glow bar. Common repair for gas ovens that click but don't ignite. Simple 5-15 minute DIY fix.

Oven won't heat or takes forever to reach temperature? This igniter creates the spark to ignite gas for baking. DIY-friendly repair, 20-30 minutes.

Flame deflector for gas ranges. Installs above the burner to direct heat evenly. Replace if cracked, warped, or missing for proper heat distribution.

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.

Fix gas smell when range is off with this safety valve lockout clip. Secures gas valve actuator to prevent unintended movement. Simple DIY repair.

Silicon controlled rectifier for cooktop power control. Includes 8-32 mounting screw. Replace if damaged, corroded, or missing to restore proper installation.