General Electric Control Board

This part is a tactile control assembly kit that is used on a dishwasher. The tactile control assembly is the system that uses touch to make adjustments. For example, the buttons are connected to this tactile control assembly, and when the buttons are pressed, it is activated. A new tactile control assembly kit may be needed if the dishwasher keypad is entirely unresponsive when the buttons are pressed. If this is the case, the dishwasher will not be able to be used at all. The replacement process is relatively easy and takes anywhere from 30 to 60 minutes to complete. A screwdriver will be needed for the replacement.This tactile control assembly is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific tactile control assembly is compatible with dishwashers that are manufactured by the General Electric brand.

This clock control board is the electronic brain of your oven. It powers the display, reads keypad inputs, and controls bake/broil functions so you can set temperatures, timers, and cycles reliably. What it does

• Drives the time/temperature display and kitchen timer
• Interprets keypad inputs for bake, broil, and clean
• Sends power to heating circuits via onboard relays
• Manages alarms and fault monitoring

• Blank, dim, or garbled display
• Buttons unresponsive or erratic
• Oven won't start or won't heat despite good elements and power
• Random beeping or fault/error codes

• 1 electronic clock/control board

• Disconnect power at the breaker before servicing; verify no voltage is present
• Use anti-static handling; avoid flexing or touching component pins
• Photograph and label all wire connections before transfer
• If your model uses a separate overlay/keypad membrane, carefully transfer it from the old board

This relay board assembly switches line power to the range/oven's heating circuits under the direction of the electronic control, helping restore reliable bake/broil operation when relays or board components fail. What it does

• Controls power to the bake and broil elements via onboard relays
• Executes low-voltage commands from the control to switch high voltage to the heating circuits
• Failure symptoms can include no heat in bake or broil, one element not working, or intermittent heating
• Burn marks or a stuck/clicking relay on the board may be visible indicators of failure

• 1 relay board assembly

• Disconnect power at the breaker before servicing; this board carries live voltage
• Access location varies by model; photograph and label all wires for correct reassembly
• Handle the board by its edges and observe ESD precautions
• Ensure all connectors are fully seated and the board is securely mounted before restoring power

This is a replacement control board that has been manufactured by General Electric for use with refrigerators.The control board is a critical component that ensures various refrigerator functions, such as defrost times and cooling, are properly regulated. This part should be replaced as soon as possible if faulty, otherwise the refrigerator may not be able to maintain a cold temperature or might not work at all. Before replacing this part, ensure the appliance is entirely disconnected from the power and water sources. Whenever attempting a repair, wear work gloves for protection.This part is suitable for use on a refrigerators that have been manufactured by General Electric, Hotpoint, RCA, and some other brands. This is a genuine OEM part and thus is manufactured from high-quality, durable, non-corrosive materials and is only sold individually.

This washer main control board, also called the electronic control, runs the selected cycle and coordinates the motor, filling, draining, and spinning. Replacing a failed board restores proper operation and returns responsive, reliable control of the washer.

• Controls the timing and sequence of wash, rinse, and spin cycles
• Sends power to the drive motor, water inlet valves, and drain pump as needed
• Interprets inputs from the user interface and safety interlocks to run the chosen program
• Failure symptoms can include the washer not starting or accepting inputs, cycles that won't advance, no spin/agitation, or a dead/intermittent console

• Disconnect power before servicing; verify power is off with a meter
• Handle the board by its edges and protect against static discharge; photograph wiring for reference
• Match each connector by position and orientation; secure the board in the original mounts
• After installation, perform a control reset or run the model's diagnostic/calibration as directed in the service information

This electronic oven control board manages bake/broil power, temperature regulation, and the clock/display for the range. Replacing a failed control restores accurate heating, reliable cycle timing, and responsive keypad/display operation.

• Regulates bake and broil element power using feedback from the oven temperature sensor
• Controls oven temperature, cooking cycles, and timing functions
• Operates the clock, display, and keypad interface
• Typical failure symptoms can include no heat or won't start, won't reach/hold set temperature, blank/unresponsive display, or error codes/beeping

• Disconnect power at the breaker before servicing
• Handle the new board by the edges and use anti-static precautions
• Photograph wiring and move connectors one at a time; transfer any mounting brackets and the user interface overlay from the original
• After installation, set the clock and test bake/broil operation

This dishwasher timer controls the timing and sequence of wash, rinse, drain, and dry operations. Replacing a failed timer ensures the machine advances through each stage properly for complete cycles and reliable cleaning results.

• Advances the cycle and routes power to pumps, valves, and heater at the correct times
• Can cause cycles to run unusually long/short or skip steps when failing
• Intermittent start/stop behavior during a cycle can also indicate a worn timer

• Disconnect power at the breaker before servicing
• Access the control console; document wire locations and transfer one lead at a time to the new timer
• Mount securely and route wires clear of sharp edges or moving parts
• Restore power and run a short test cycle to proper advancement

This relay board works with the main control to switch power to high-load oven components. Replacing a failing board can restore consistent heating and reliable performance across bake, broil, and convection functions. What it does:

• Switches high-voltage power to oven elements and fans as directed by the control
• Loss of heat in one or more modes (bake/broil/convection) is a common failure symptom
• Intermittent or erratic heating, long preheat, or heat stopping mid-cycle
• Visible burn marks or heat damage on the board

• Disconnect power at the breaker or fuse box before servicing
• Access location varies by model (rear panel or control compartment)
• Photograph wiring and move connectors one at a time to the new board
• Handle by the edges and use anti-static precautions; reuse existing hardware

The Main Control Board  is an OEM part for GE refrigerators. This main control board serves as the central control hub for your refrigerator, responsible for regulating various functions such as temperature control, defrost cycles, and overall operation.

A bad main control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as erratic temperature readings, unresponsive controls, or complete refrigerator malfunction, it may be time to replace the main control board.

Symptoms of a bad main control board include:

• Erratic temperature readings
• Unresponsive controls
• Complete refrigerator malfunction

Restore proper function to your GE refrigerator by replacing the faulty main control board with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This is the display/control circuit board for the refrigerator's user interface. It drives the temperature/readout display and processes button inputs so you can adjust settings and dispenser functions from the front panel.

• Manages the front-panel display and keypad signals
• Helps when the display is blank or dim
• Helps when buttons don't respond or settings won't change
• Helps with erratic or incorrect temperature readouts

• Disconnect power to the refrigerator before servicing
• Use proper ESD precautions when handling the board
• Take photos of wire/ribbon connections to ensure correct reassembly
• After installation, restore power and verify display and button operation

Restore reliable oven operation with this electronic oven control board. It governs the bake/broil relays, regulates temperature with the sensor, and runs the display and keypad so settings respond and heat is accurate.

• Interprets keypad inputs and switches oven heating circuits through onboard relays
• Works with the temperature sensor to maintain the set temperature during bake and broil
• Powers the clock/temperature display and stores oven settings
• Common signs of a failed board: blank or flickering display, unresponsive keys, no bake/broil heat, erratic temperatures, or recurring control error codes

• Disconnect power at the breaker before servicing
• Handle the board by the edges and protect against static discharge
• Photograph wiring and transfer any brackets, spacers, or the overlay from the old board
• Seat ribbon cables/connectors fully and verify operation after reassembly

The Washer Timer controls the sequence and duration of wash, rinse, and spin cycles. Replacing a worn timer restores proper cycle progression so the washer starts, advances, and completes loads reliably without manual knob turning.

• Sends power to water inlet valves, drive motor, and drain pump at the correct times
• Advances the wash, rinse, and spin stages in order
• Failure symptoms include: won't start, won't advance or stops mid-cycle, runs only on one setting, or no agitate/spin
• Helps restore accurate cycle timing and completion

• Disconnect power before servicing
• Open the console/control panel to access the timer; remove mounting screws/clips
• Label or photograph wire locations and transfer wires to the new timer one at a time
• Reuse the existing knob and dial as needed; seat the shaft fully and test a short cycle

This replacement part is a control board that has been manufactured by General Electric and is compatible with dryers. This part works by allowing the user to select the desired functions such as the drying time or the temperature. Control boards are subject to wear and tear over time, which may cause them to deteriorate or become faulty, requiring replacement. Before attempting any sort of repairs, ensure that the dryer has been entirely disconnected from all power sources to prevent the risk of injury, particularly from electrocution. Work gloves should also be worn.This is a genuine OEM part that has been sourced directly from the manufacturer. This is an authentic part made of high-quality, durable, non-corrosive materials and is compatible with dryers manufactured by General Electric, Hotpoint, RCA, and some other brands. This part is only sold individually.

This electronic control board manages the oven's display, keypad inputs, and bake/broil outputs. Replacing a failing board restores the clock, user interface response, and reliable temperature control so your oven heats and operates as expected.

• Interprets touchpad inputs and controls bake/broil relays and timed functions
• Powers and manages the display/clock for the oven's user interface
• Works with the temperature sensor to regulate and maintain set temperatures
• Common signs of failure include a blank or dim display, unresponsive buttons, beeping/error indications, or an oven that won't start or heat

• Disconnect power at the breaker before servicing
• Use ESD precautions; avoid touching circuitry and connector pins
• Photograph and label wiring; move connectors to the new board one at a time
• If your model uses a separate adhesive overlay/touchpad, transfer it to the new board before reassembly

This electronic oven control board (ERC) governs the clock, display, keypad inputs, and bake/broil relays. Replacing a failed control restores accurate temperature regulation, responsive controls, and normal display/timer operation.

• Controls bake and broil relays to heat the oven to the set temperature
• Manages the digital clock, timer, and display
• Interprets keypad inputs to start/stop cooking functions
• Common symptoms: oven won't heat or won't start, temperature drifts, blank or unresponsive display, recurring error codes/beeping

• Disconnect power at the circuit breaker before servicing
• Access the control behind the control panel; note screw locations and panel orientation
• Photograph wiring and move connectors to the new board one at a time to prevent miswiring
• Handle by the edges to avoid static damage; transfer any mounting hardware or overlay from the original board

Replace a failed dryer timer to restore reliable cycle selection and timing. This dryer control advances the machine through selected cycles so loads run and finish on the chosen program. What it does

• Advances the dryer through cycle steps and governs timed run lengths.
• Used for selecting timed and automatic cycles; coordinates cycle changes.
• Common symptoms: timer won't advance, dryer stays on one cycle, or cycles don't complete.
• Replace when the timer knob fails to turn or cycles no longer respond to controls.

• Disconnect power (unplug or shut off the breaker) before servicing to avoid electric shock.
• Access usually requires removing the control panel and unplugging the wiring harness; keep track of fasteners and connector locations.
• On gas dryers, shut off the gas supply before starting any work.