General Electric Touch Pad

This replacement backsplash assembly restores the finished rear panel on compatible ranges, protecting the wall behind the cooktop and returning the appliance's original appearance. Use it when the original panel is bent, rusted or cosmetically damaged. What it does

• Covers and protects the rear area of the cooktop from heat, grease and splatter
• Restores the appliance's finished look after dents, scratches or corrosion
• Provides the mounting surface for rear-mounted controls and components
• Prevents drafts and gaps behind the range that can collect debris

• Disconnect power to the range before beginning any service to avoid shock
• Typical installation requires removing a few screws and lifting the old panel out; basic hand tools are usually sufficient
• Take care with sharp edges and painted surfaces to avoid cuts or damage

This control panel assembly replaces the front user console on compatible GE ranges and ovens, restoring reliable button and display control for oven functions and temperature settings. It helps bring back normal operation when the console is unresponsive or buttons fail. What it does:

• Houses the user interface for oven controls, including key switches and display area
• Allows selection of bake, broil, timer and other cooking functions
• Restores responsive keypad/buttons and proper command signals to the range control
• Commonly used when buttons are unresponsive, display is dim/blank, or controls act intermittently

• One control panel assembly (console) as shown

• Disconnect power at the breaker before starting; risk of electrical shock if power remains connected
• Basic disassembly of the oven/range front bezel is usually required; handle the display and ribbon cables with care

This control panel assembly replaces the oven console user interface so you can restore the range's buttons, display and touch controls for normal cooking operation. It fits into the front console and provides the main input/display surface for oven functions. What it does:

• Houses the push buttons/touch controls and display used to set bake, broil, timers and clock
• Restores responsive control if buttons are cracked, stuck, or the display is obscured
• Provides mounting and electrical connection for the console electronics
• Helps clear user-interface related errors when the physical panel or buttons are damaged

• One control panel assembly

• Disconnect power at the breaker or unplug the appliance before starting.
• Handle the panel and display area carefully to avoid cracking glass or scratching surfaces.
• Keep all mounting hardware; electrical connectors are fully seated during reassembly.
• Test functions after reconnecting power before completing reassembly.

This keypad assembly is the user-facing control panel that lets you select cycles and options on your washer. Replaces a worn or unresponsive keypad to restore reliable button response and control readability. What it does:

• Provides tactile button input for cycle selection, start/pause, and option functions
• Restores control responsiveness when buttons are sticky, cracked, or unresponsive
• Maintains the front console finish and label legends for clear visibility
• Interfaces with the washer's control board to send user commands

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access typically requires removing the top or front console cover; keep track of screws and clips
• Handle the ribbon cable and connector carefully to avoid damage; align and seat fully on reinstallation

This backsplash assembly replaces a damaged or worn rear backguard on ranges and cooktops, restoring a clean appearance and covering the appliance's rear controls and wiring for safe, reliable operation. What it does:

• Covers and protects the range's rear control area and internal wiring from spills, heat, and debris
• Restores a finished look when the original backguard is dented, scratched, bent, or missing
• Provides mounting surface for controls and trim components when applicable
• Helps maintain proper airflow and safety clearances around rear components

• Disconnect power to the appliance before starting any repair
• Removal of control panel or trim may be required; follow OEM instructions
• Handle carefully to avoid scratching finished surfaces; two people may be helpful for alignment

This switch panel is the front control surface that houses the oven/range switches and user controls, restoring reliable input and visible indicators so you can select settings and operate the appliance with confidence. What it does:

• Provides the mounted switches and contact points for oven/range functions
• Transfers button presses to the control assembly so selections register correctly
• Restores visible indicators and tactile control when worn or damaged
• Commonly replaced when buttons stick, controls fail to engage, or the panel is cracked

• Disconnect power to the appliance before beginning any work to avoid shock
• Handle carefully to avoid damaging switch contacts, wiring, or cosmetic surfaces
• May require removing the console or back panel to access mounting screws and wiring harnesses

This control panel overlay is the printed decal that covers the front of the appliance's control console, restoring legible button labels and a clean appearance for easier operation. What it does:

• Replaces worn, faded, or scratched button graphics so settings and icons are visible
• Restores the control surface look for a like-new appearance
• Helps prevent user confusion from illegible or missing labels
• Maintains original button alignment and cutouts for proper access

• Disconnect power to the appliance before beginning any work.
• Remove the console or trim per the appliance instructions to access the old overlay; typically held with screws or clips.
• Peel off the old overlay, clean the surface with a mild, non-abrasive cleaner, then align and apply the new overlay smoothly.
• If adhesive backing is present, press firmly to ensure full contact; avoid harsh solvents or heat during installation.

This control panel assembly replaces a damaged or unresponsive console to restore your appliance's front-user controls and button feedback. It provides the interface that sends user commands to the appliance's control electronics. What it does:

• Houses the front buttons/touch pads and status indicators used to select cycles and settings
• Transmits user inputs to the main control so the unit will start and change settings
• Commonly replaces panels that are cracked, worn, or have non-responsive buttons
• Can resolve issues where button presses do not register or the control surface is cosmetically damaged

• Control panel assembly (1)

• Disconnect power before beginning service to avoid shock or damage
• Replace with the exact part number shown on the old panel; handle the assembly carefully to avoid scratching or bending
• Minor disassembly of the top/front trim and electrical connector removal are typically required; reinstall all fasteners and connectors securely

This control panel assembly replaces the oven's front console that houses the keypad and display, restoring user controls and readable status feedback for the range. It's a direct-fit console component used to operate oven functions. What it does:

• Provides the front-mounted keypad and display interface for setting temperature, timers and oven modes
• Replaces a cracked, unresponsive, or incorrectly displaying console to restore normal controls
• Carries the underlying wiring connections and mounting points for secure installation
• Works with the oven's electronic control board to send user commands

• Disconnect power at the breaker before starting any repair to avoid shock
• Remove oven trim or mounting screws to access and unplug the existing control panel harness
• Handle the display and glass surfaces carefully to avoid damage or fingerprints

This part is a control panel assembly that is used on a microwave unit. This particular control panel is white in color and features all of the buttons that control the appliance. It also features a digital display.In the event that any of the buttons on the control panel do not work, this part will need to be replaced. Over time and with use, the text on the buttons may begin to wear off due to normal wear and tear. If this is the case, this part can be replaced so that the text identifying the functions can be seen. It's imperative that the microwave is unplugged from the electrical outlet before attempting to replace this part.This specific control panel assembly is compatible with microwaves that are manufactured by General Electric. It is sold individually and sourced from the manufacturer.

This control panel assembly replaces the front console controls and trim to restore clear touch/key operation and a clean stainless-steel appearance. It provides the user interface and mounting surface for the range/oven control components. What it does

• Houses the touchpads/buttons and display window used to set oven functions and temperatures
• Restores responsive control input when worn, cracked, or cosmetically damaged
• Re-establishes a finished stainless-steel front for a consistent appearance
• Helps resolve intermittent or unresponsive control-panel behavior when the assembly is the faulty component

• One control panel assembly (stainless steel)

• High-level replacement; disconnect power at the breaker before starting to avoid shock
• Installation typically requires removing the oven/range door and trim to access mounting screws and connectors
• Handle wiring harness connections gently and match connector positions when reassembling

This control panel assembly replaces the oven's electronic console to restore keypad input and display functions, letting you set cook times, temperatures and modes from the front console. What it does:

• Houses the touchpads/buttons and display used to control oven functions
• Sends user commands to the oven control board so settings are registered
• Commonly replaced for unresponsive buttons, blank or garbled display, or cracked/damaged front panel
• Restores normal front-panel operation without replacing the main control board

• One control panel assembly (electronic console) as shown

• Disconnect power to the appliance at the breaker before starting work
• Handle the assembly carefully to avoid damaging the display, ribbon cables or connectors
• Basic hand tools typically required; some disassembly of the outer door/console may be needed

This recessed trim piece replaces a bowed or damaged trim that surrounds a refrigerator recessed handle, restoring a clean appearance and secure fit. It covers the trim opening and helps keep the handle area sealed and finished. What it does:

• Replaces bent, warped or bowed recessed trim around the door handle area
• Restores the finished look and helps hold the handle trim in place
• Reduces gaps where dirt or moisture can collect near the handle
• Helps prevent the trim from catching or snagging when opening the door

• Disconnect power to the appliance before starting work when required for your model
• Remove door handle or existing trim per your model's service instructions to access trim
• Align trim in the recess and snap or fasten into place; avoid forcing or prying to prevent damage
• If trim clips are broken, replace clips as needed

This control panel is the user console that houses the oven/range buttons and display, restoring normal operation and allowing program selection and status feedback. It replaces a cracked, unresponsive, or damaged front console. What it does:

• Provides the front keypad and display interface for programming temperatures, timers, and oven functions
• Restores responsive button input and clear status readouts when the original panel is cracked, worn, or non-functional
• Helps resolve issues where controls do not register presses or the display is obscured
• Works as the main user-access point for starting and stopping cycles and setting options

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the panel carefully to avoid bending or damaging the display and connectors
• Some installations require removing the oven console trim and disconnecting wiring harnesses; keep screws and small parts organized

A replacement control panel sub-assembly that restores the appliance's front console interface so the control board, touchpad or display connections sit securely and function correctly. Use when the console housing is cracked, loose, or failing to hold controls. What it does:

• Provides the mounting and connection point for the oven/range control board, touchpad and display components.
• Helps ensure reliable electrical connections between the user controls and main control electronics.
• Commonly replaces a damaged, cracked, or warped console that causes unresponsive buttons, intermittent display issues, or loose controls.
• Supports normal operation of front-panel features once the underlying electronic components are secure.

• One control panel sub-assembly.

• Always disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle the panel carefully to avoid scratching painted surfaces or damaging clips; some disassembly of the console and removal of knobs or trim may be required.
• Verify connector seating and routing during reassembly to prevent pinched wires or loose connections.
• If control buttons or the display still don't work after installation, the issue may be the touchpad or main control board—test those components separately.