Generac Hose, Tube & Fitting

This is a hose designed to be used with pressure washers by Generac. It has an M22 connection and is rated for up to 3100 PSI. The hose is used for washing automobiles, boats, and other vehicles. The water moves from the pressure washer into the hose and the stream can be directed onto the automobile to remove dirt and other debris from its surface. The hose can wear out over time or become damaged and will need to be replaced.The easiest way to determine where the hose needs to be replaced is by doing a visual inspection. Look over the hose for cracks, holes, or other damage. If the hose is starting to wear out, it will also need to be replaced. A broken or damaged hose may leak or not provide the proper water pressure. Remove the original hose and connect the new one to the equipment.This hose is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The hose is designed to be used with several pressure washers manufactured by Generac.

This is an authentic Karcher replacement hose designed for high-pressure washers. This hose transports soap from the detergent tank and carries it to the manifold assembly. A filter is built into the hose to prevent contaminants that might enter into the manifold from backing into the soap container. High-pressure hoses are extremely durable. However, they experience more wear, jostling, and stretching than any other part of the pressure washer. As a result, they occasionally need to be replaced. One symptom that the filter is no longer functioning to watch for is dark clouding in the soap. If soap appears on the exterior of the washer manifold or pure water only jets from the pressure nozzle, this is another sign that the hose needs to be replaced. To preserve the hose, soap tank, and internal workings of the pressure washer, it is essential never to use bleach in the detergent tank. Bleach is a highly corrosive material that will quickly ruin the washer. The high-pressure spray will also fill the air with droplets of bleach, which is a hazardous chemical to inhale. This hose is designed to fit more than a dozen pressure washers. It is an OEM certified part, manufactured to the exact specifications of the original hose. Part sold individually.

This breather tube is a genuine OEM replacement part sourced directly from the manufacturer. It is used on various lawn mowers and small engines to provide ventilation to the engine crankcase and prevent pressure buildup. It attaches to the cylinder assembly so that air can flow in and out and prevent damage to the engine. The breather tube on lawnmowers also has a reed that lubricates the pistons by collecting oil and sending it back to the crankcase. Over time, the breather tube may become dry and brittle, resulting in cracks. A damaged breather tube can lead to blown seals and gaskets, oil leaks, and reduced engine performance. Oil leaks are identified by bluish smoke coming from the exhaust, engine backfiring, or a decrease in overall performance. If this occurs, check the breather tube for clogs or damage. Replacing the breather tube requires a cooled-down muffler and screwdriver. Remove the muffler to reach the tube. Remove the screws holding the tube in place. Remove the tube and check for damage and clogs. Replace with a new tube if it is damaged. Reinstall the tube and screws. Reinstall the muffler. This breather tube is made of durable rubber and is sold as an individual part. The tube does not come with retaining screws. It is compatible with lawn mowers and small engines manufactured by Tecumseh, Toro, and Cub Cadet.