Generac Pressure Washer Parts

This is an authentic Karcher replacement hose designed for high-pressure washers. This hose transports soap from the detergent tank and carries it to the manifold assembly. A filter is built into the hose to prevent contaminants that might enter into the manifold from backing into the soap container. High-pressure hoses are extremely durable. However, they experience more wear, jostling, and stretching than any other part of the pressure washer. As a result, they occasionally need to be replaced. One symptom that the filter is no longer functioning to watch for is dark clouding in the soap. If soap appears on the exterior of the washer manifold or pure water only jets from the pressure nozzle, this is another sign that the hose needs to be replaced. To preserve the hose, soap tank, and internal workings of the pressure washer, it is essential never to use bleach in the detergent tank. Bleach is a highly corrosive material that will quickly ruin the washer. The high-pressure spray will also fill the air with droplets of bleach, which is a hazardous chemical to inhale. This hose is designed to fit more than a dozen pressure washers. It is an OEM certified part, manufactured to the exact specifications of the original hose. Part sold individually.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

This is an OEM replacement part for Generac generators. The ignition coil is attached to the spark plug and the side of the flywheel and creates the electricity that powers the spark plug to create the spark that fires the ignition. If the engine won't start or won't stay running, the coil could be faulty and require a replacement. The spark plug should be replaced regularly, but if it has been done recently or proves to be in working order, the coil has probably gone bad and needs to be replaced. This replacement part will solve the issue for compatible engines. The ignition coil assembly is a genuine part that is manufactured by Generac to exact OEM standards. It is compatible with portable generators. The replacement requires a screwdriver, socket wrench, and adjustable wrench or nut driver. This is a durable part made from high-quality rubber and metal and it is sold individually. No hardware is included with this assembly and will need to be purchased separately if it is required for any repairs.

Designed with wires ready for installation, this on/off switch includes the bold red handle with on and off indicators, grounding lines, and pre-stripped and seated wiring. With a rotary design, it may need replacement when a machine is used frequently or the on/off switch is handled roughly. Making the repair requires a screwdriver and pliers. It is necessary to disconnect power cables when doing this repair in order to remain safe at all times. Removing the entire outdated assembly and then reconnecting the new wires is necessary, and caps may be required but do not come with the unit. This genuine OEM on/off switch is made for Generac brand portable generators. It is also effective on some brands of pressure washers. This item ships individually.

This genuine carburetor insulator gasket is designed for use with select generators. The carburetor insulator gasket is designed to be installed between the carburetor and the engine block, providing an insulated seal that keeps air out and ensures that the engine is operating at peak performance. Gaskets are subject to a lot of pressure and high heat with regular use and will degrade or warp over time. This can result in leaks and other issues, so gaskets should always be replaced immediately. This OEM carburetor insulator gasket can provide an exact fit for compatible machines. This is a genuine product that is manufactured to exact standards by Generac. It is designed for use with select models of their generators. The gasket is made from durable composite materials and is sold as an individual unit. Gaskets are typically considered a part of routine maintenance and some people will purchase an extra unit to keep on hand in case of emergency repairs. This carburetor insulator gasket does not include any hardware or additional parts. A wrench set will be required for replacement. Always wear gloves when performing engine maintenance and repair. Repairs should never be performed on a hot engine.

This is a genuine fuel tank assembly that is designed to be used with select gas-powered pressure washers. The fuel tank assembly is responsible for holding the gas to operate the engine, using fuel lines to run the fuel back and forth between the engine and the fuel tank. This is a durable metal part, but over time it can become corroded, dented, or otherwise damaged due to impacts or even regular everyday use. Damaged fuel tanks can leak and lead to fuel waste or even run the risk of creating a fire hazard. This is a genuine replacement fuel tank that is manufactured to OEM standards and serves as an exact replacement for compatible machines. It can be used with Generac generators, and is compatible with dozens of models. It is important to drain the fuel system and disconnect the spark plug before beginning this repair, and always work in well-ventilated areas when working on engines and outdoor power equipment. This durable metal fuel tank is sold as an individual unit and does not include the hardware needed to secure the tank. It does include the fuel cap so that both are replaced at the same time.