Parts for White Outdoor 31AH5MLH590 / 2006: General Assembly Parts

Cleanout tool for snow throwers. Installs on the discharge chute housing. Replace if the original tool is lost, broken, or missing from your machine.

Snow not blowing out of your snowblower? A damaged impeller assembly prevents snow from discharging through the chute. Direct replacement part.

Hex screw for lawn mowers and garden equipment. Replaces cracked, stripped, or missing hex head bolts. Six-sided head fastens metal or wood components.

Carriage bolt for outdoor power equipment. Secures scraper blades, decks, and attachments. Replace if missing, stripped, or corroded during repair.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

Hex screw for lawn tractors and mowers. Used to secure various components during assembly or repairs. Replace if stripped, corroded, or missing.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Replacement flange lock nut for lawn mowers and garden equipment. Secures parts in place. Order a new nut if yours is stripped, loose, or missing.

Flanged lock nut for mower handles and snowblower chutes. Replace worn, stripped, or missing nuts that allow controlled flex in joints. 3/8" size.

7-inch plastic cable tie secures cables to lawn mower or tiller handles. Replace when cracked, broken, or worn to keep cables properly fastened.

Replacement spacer bushing for gas snowblowers. Installs between moving components to maintain proper alignment. Order a new one if original is worn, cracked, or missing.

Push-on nut for lawn tractors and snow throwers. Secures components in place. Replace if missing, damaged, or no longer holding firmly during operation.

Chute adapter connects the auger housing to the lower chute on your snowblower. Replace if cracked, broken, or damaged to restore proper snow direction.

Extension spring for snow blower idler pulley assemblies. Mounts to housing to maintain proper tension in belt drive system. Replace if stretched, broken, or missing.

Wave washer for lawn tractors and snow blowers. Replace if washer is missing, flattened, or worn to restore proper spacing and tension in assembly.

Tool mounting bar clip for gas snowblowers. Secures tool holder bar to the frame. Replace if clip is cracked, bent, or missing to properly mount tools.

Shoulder screw fastener for lawn and garden equipment. Holds components in precise position with unthreaded shoulder design. Replace if damaged or missing.

Replacement screw for snow blowers and tillers. Secures components in place throughout the machine. Replace if stripped, missing, or damaged.

Auger bearing flange connects to the bearing to reduce friction during operation. Replace if worn or damaged to restore smooth auger rotation. Verify fit.

Auger bearing for snow throwers supports rotating shaft movement. Replace if you hear grinding noise or auger doesn't spin smoothly. Verify fit with model.

Idler pulley that applies tension to and guides the engine drive belt on lawn tractors. Replace if worn, cracked, or causing belt slippage. 2.75" diameter.

Snow thrower bearing reduces friction for smooth operation. Replace if you hear grinding or unusual noises during use. Confirm fit with your model number.

Fix snow thrower auger not turning or slipping with this auger idler bracket. Essential component for proper belt tension and auger engagement.

Snowblower won't throw snow or clears unevenly? This left hand auger assembly collects and feeds snow to the impeller. Moderate DIY repair.

Fix your snowblower that won't clear snow on one side with this right-hand auger assembly. Moderately difficult repair for improved snow removal.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.

Replacement spacer bushing for gas snowblowers. Installs between moving components to maintain proper alignment. Order a new one if original is worn, cracked, or missing.

Flat washer for lawn mowers and tractors. Spreads load from bolts and screws to prevent damage. Replace if worn, cracked, or missing hardware.

Replaces broken or sheared auger shear pin on snow throwers. This safety part snaps when auger hits obstacles to protect engine from damage.

Flange bushing for snow throwers and lawn equipment. Replace when worn to maintain smooth operation and prevent part damage. Verify fit with your model.

Replace your snowblower's bearing housing to restore smooth auger operation and prevent shaft damage. Verify fit with your model number before ordering.

Carriage bolt for snowblower attachments and snow throwers. Secures components and panels. Replace if bolt is stripped, rusted, or missing.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Fix a chute that won't rotate properly with this snow thrower chute flange keeper latch. Secures the flange to ensure smooth chute rotation. Easy DIY fix.

Lower chute assembly for snowblowers. Directs snow discharge from the impeller. Replace if cracked, broken, or missing for proper snow routing.

Protective bushing for steering gear and chute crank assembly. Replace if steering feels loose or you hear clunking when turning. Verify fit with model number.

Replacement chute crank bracket for snow blowers. Holds and positions the chute at the proper angle. Replace if cracked, broken, or missing.

Replacement skid shoe for snow blowers. Mounts to the side of the auger housing to protect surfaces and control clearing height. Replace when worn.

If your snow blower won't move or gears slip, the transmission housing assembly may be damaged. This part houses critical drive components.

Snowblower won't move or loses power? This transmission reduction gear housing restores drive function. Moderate DIY repair for common drive issues.

Seals internal engine components to prevent oil leaks. Replace when you notice oil seeping around the crankshaft or engine housing. Confirm fit with your model.

Flange bearing for snow blower auger and drive systems. Replace if you notice wobbling, grinding noise, or rough rotation. Verify fit with your model number.

Hex head self-tapping screw for securing engine housing components on outdoor power equipment. Replace if stripped, rusted, or missing during repairs.

Hi-pro key secures pulleys and gears to transmission shafts on snowblowers and tractors. Replace when damaged, broken, or lost for proper operation.

Dowel pin fastener for gas snowblowers. Secures components in place during operation. Replace if missing, bent, or sheared to restore proper assembly.

Worm shaft for snowblower auger drive system. Replaces worn, stripped, or broken worm shafts. Installs in gearbox to transfer power to auger assembly.

This thrust collar is a structural component that maintains proper spacing in the auger or drive system. Replace if cracked, worn, or missing to restore assembly.

Leaking oil from your snowblower gearbox? This gearcase grease plug seals the oil port to keep lubrication inside. Simple plug replacement part.

Oil seal prevents leaks on snowblower worm shaft and bearing flange. Replace when you notice oil leaking from the engine area. Verify fit with your model.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

Flat washer for lawn and garden equipment. Spreads load under bolts and screws to secure components. Replace if cracked, worn, or missing.

Flange bearing supports rotating shafts in snow blower drive systems. Replace if worn, noisy, or causing wobble. Verify fit with your model number.

Replaces broken or frayed clutch control cable on gas snowblowers. Connects handle control to engagement mechanism. Order new cable if damaged or worn.

Flange bearing fastens critical components in your snowblower. Replace if worn, loose, or causing unusual noise. Verify fit with your model number.

Spacer for snow throwers and small engines. Fits over bolts or screws to maintain proper spacing between components. Replace if missing or damaged.

Metal grease fitting that attaches to the pivot bar on lawn equipment. Replace if worn, damaged, or missing to ensure proper lubrication of moving parts.

Metal skid shoe that attaches to the bottom of your snowblower to protect the auger housing and concrete surfaces during snow removal operations.

Drift cutter blade guide for snow blowers. Mounts to the auger housing to direct snow flow. Replace if cracked, bent, or missing for proper operation.

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

Secures components on mowers and outdoor power equipment. Replace when stripped, rusted, or loose. Verify thread size 5/16"-18 x 3/4" fits your model.