Husqvarna Snow Removal Equipment Parts

This spacer is a genuine Husqvarna part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to function within a fastening component, such as a washer, screw, bolt, or nut, in order to reduce friction between components as well as to allow room within the infrastructure of the appliance for components to shift and move around without detaching.The spacer in a lawn mower might need to be replaced if the small component is lost, misplaced, or damaged over time. Additionally, the spacer can fall out and be lost over the typical use of the lawn mower. If this occurs, the spacer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor brands: Husqvarna, Craftsman, McCulloch, Poulan, Flymo, and Weed Eater.

This is an auger shaft bearing that is used on many snowblowers created by Husqvarna. The auger shaft bearing connects to the auger plate. A bearing helps the shaft rotate easily inside of a snowblower. Through use or time, the auger shaft bearing can become damaged or break and will need to be replaced. If the bearing is damaghed, it can cause vibrating, wobbling, or binding and may prevent the shaft from rotating. Failed bearings also sometimes create a squealing sound coming from the snowblower.If any of these things are occurring with a snowblower, the auger bearing will need to be replaced. Place the blower on a flat, stable surface and disconnect the spark plug wire before beginning. The belt cover and auger belt will need to be removed along with the roller bracket. Remove the auger housing to get access to the auger shaft bearing to replace it. Reassemble the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual unit. The auger shaft bearing is made to be used with several snowblowers manufactured by Husqvarna.

This replacement part is a cable control. It is a genuine replacement part made by Husqvarna. This part is typically found in lawnmowers and allows the user to control the settings of the appliance by using the cable. This is attached to the engine and allows different settings and powers to be selected.A new control cable might be needed if the current one is damaged or missing. If the control cable is stripped from regular use over time, it is recommended that it be replaced. If the user is unable to control the appliance from the control cable, it can be due to a faulty cable. Be sure the engine is powered off completely before replacing it.This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.

This belt is a genuine Husqvarna part. It is a traction drive v-belt that is manufactured as a replacement part for snow blowers and snow throwers. It is made from flexible rubber materials.On the snow blower, the traction drive v-belt works with the pulley assembly in order to transfer the power that the engine generates to run the mower. One common sign that the belt needs to be replaced is if the snow blower or thrower makes a loud screeching sound, particularly when first started.This traction drive v-belt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with snow equipment made by Husqvarna, Jonsered, and Poulan. It replaces obsolete part number 437261.

This part is a replacement auger paddle. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or defective auger paddle in several varying models of snow blowers.The auger paddle rotates inside the snow blower housing and scoops snow up so it can be expelled in the desired direction. Because this part has regular contact with the ground, it can become worn down easily, thus requiring replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this auger paddle, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This auger paddle can be used with snow blower models that have been manufactured by Husqvarna and Poulan. Sold individually.

This part is a replacement retainer clip. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced retainer clip in lawn mowers and snowblowers. Retainer clips are a fairly standard piece of hardware that can be used to secure parts of the equipment but can also be quickly and easily removed for easy access to areas such as the engine. No special tools are required to replace this part. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this retainer clip, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this retainer clip is suitable for use on several different models of lawnmowers and snowblowers manufactured by Husqvarna and Poulan. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This lock nut is a genuine Husqvarna part, sold individually. This lock nut can be used as a replacement part in lawnmowers, snowblowers, and tillers. The purpose of a lock nut for one of these small engine outdoor appliances is to serve as a fastening component in conjunction with a bolt.The lock nut in a small engine outdoor appliance is a small component that can be easily lost or misplaced at any point within the typical lifespan of the appliance. The lock nut can also suffer damage that can reduce or negate its functionality, in which case the lock nut should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lock nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Murray, and Ariens.

This replacement flywheel assembly for use in chainsaws fits onto the crankshaft. It features magnets along the side that provide an electric charge when the magnets go past the ignition module. The electric charge that is created by the flywheel and ignition module passes to the spark plugs, which spark the air-fuel mix in the cylinder. The metal flywheel could become corroded, which can make parts of it brittle. Over time, the flywheel could also become worn down from natural use, and it might no longer function properly. This would mean that it would be difficult or even impossible to start the chainsaw. When this part fails, owners should replace it right away. The authentic OEM chainsaw flywheel assembly is sold individually. It is made to work with chainsaws, and it is compatible with several different brands including Husqvarna, Craftsman, Poulan, and Poulan Pro.

This carburetor repair kit is a genuine Husqvarna part, sold individually. This carburetor repair kit can be used as a replacement part in a snowblower. The carburetor repair kit comes with all of the necessary components required to repair a damaged or malfunctioning carburetor, the purpose of which is to combine the air and fuel intake into the proper ratio to feed to the spark plugs and facilitate the ignition of the engine.The carburetor repair kit might have to be ordered as a genuine OEM part to facilitate the repair or replacement process of a broken carburetor. Hard starting, not starting, an unusual noises like clicking from the interior of the blower could all be signs that the carburetor is in need of repairs. If this occurs, the items in the carburetor repair kit should be used to fix the machinery in accordance with the instructions found either within the kit or from a relevant appliance manual or handbook.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This carburetor repair kit is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This shoulder bolt is a genuine Husqvarna part, sold individually. This shoulder bolt can be used as a replacement part in a lawn mower. The purpose of a shoulder bolt in a lawn mower is to serve as a fastening component in conjunction with a nut so that the two combine to affix one or more components to one another through the interlocking fastening system.The shoulder bolt in a lawn mower might need to be replaced if the bolt has been stripped or is lost or misplaced. This could occur easily, since the bolt is a small component that can be easily lost or misplaced without the operator noticing its disappearance; still, if the component is lost, it should be immediately replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This shoulder bolt is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This part is a replacement drive belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective, snapped, or otherwise broken drive belt in various snow blowers. The drive belt is what transfers torque and drives the transmission and the snow blower's auger. This helps to power the equipment and thus the belt will need to be replaced if snapped, worn, stretched, or malfunctioning in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this drive belt, the appropriate owner's manual and equipment diagrams should be referred to. This drive belt is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with snow blowers that have been manufactured by Husqvarna and Poulan.

This is a rubber wheel ring that attaches to the wheel hub. Rubber wheel rings are also often called friction rings. The rubber wheel ring/friction ring meshes with the friction disc. This is what causes the drive wheel axle to turn. This is an integral part of the wheel movement.A new rubber wheel ring may be needed if the existing part is visibly damaged. The operator may also notice a grinding noise when the rubber wheel ring is starting to go bad. This may need to be replaced over time after normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This rubber wheel ring is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This rubber wheel ring is compatible with snowblowers manufactured by Husqvarna, Poulan, and Jonsered.

This replacement part is a wheel. This is a genuine replacement part made by Husqvarna. This part is usually found in lawnmowers and is responsible for helping the user make turns while using the device. The machine is typically easy to maneuver as long as the wheels are in working condition. New wheels might be needed if the current ones are damaged in any way including being punctured, flat, or worn down, which can happen with normal use. Be sure to wear work gloves during this repair. It is also recommended that the engine is completely turned off to prevent injury.This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.