Parts for Lg MZBZ1715D/00: Insulator Parts

Binding head screw that fastens microwave panels and components. Replaces missing, stripped, or damaged screws to restore secure assembly and eliminate rattling.

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Flat washer for microwave fastening hardware. Distributes load and prevents surface damage. Replace if worn, missing, or cracked to maintain secure connections.

Replace your microwave's missing or stripped mounting nut. This hardware secures components during installation. Order now if your original nut is lost.

Replacement mounting screw for microwaves and wall ovens. Secures internal components and panels. Order a new screw if yours is stripped, missing, or lost.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the storage drawer to your range frame. Replace this nut if it's stripped, cracked, or missing and the drawer won't stay properly attached.

This plate assembly is the microwave turntable support that centers and stabilizes the cooking plate for even heating and safe operation. Replaces a worn or cracked base to restore proper plate rotation and support. What it does

• Supports the glass turntable and helps maintain smooth rotation during operation
• Restores proper alignment if the original base is cracked, warped, or broken
• Helps reduce wobble and uneven cooking caused by a damaged support
• Compatible with microwave models using the specified OEM part number

• One plate assembly

• Unplug the appliance before beginning any service to avoid shock or injury
• Installation is simple in most microwaves; remove the turntable and snap the old base out, then seat the replacement

Shields the waveguide from grease and food splatter to prevent arcing and maintain heating performance. Replace when damaged, stained, or burned. Verify fit by part number for your microwave model.

This flat case is the exterior housing panel that restores the appliance's finished appearance and protects internal parts from dust and damage. It replaces a cracked or worn outer housing to help keep components covered and secure. What it does:

• Replaces damaged or cracked outer housing to restore cosmetic appearance
• Protects internal components from dust, spills, and incidental contact
• Helps maintain proper panel alignment and fit of adjacent trims and controls
• Reduces the risk of exposed wiring or components after case damage

• One flat case (outer housing) as pictured

• Disconnect power to the appliance before beginning any repair
• Installation typically requires removing surrounding trim and fasteners; keep screws and clips for reassembly
• Handle edges carefully—plastic panels and metal trim can have sharp edges

Replace your cracked, broken, or missing microwave glass turntable tray. Tempered glass design rotates to provide even heating during cooking.

Microwave light bulb holder assembly secures and powers your interior bulb. Replace if bulb won't light, holder is cracked, or connections are loose. Verify fit by model number before ordering.

Circular lug that connects stripped wires to threaded terminals in microwaves. Replace if cracked, corroded, or missing to restore secure connections.

Fix uneven heating or wobbling rotation. This microwave turntable assembly includes the glass tray and roller guide for stable, smooth spinning.

Turntable stopped rotating or making grinding noise? This synchronous motor restores smooth tray rotation for even heating. Simple DIY fix with a screwdriver.

Fix a microwave turntable that won't spin or wobbles during heating. This replacement shaft restores smooth glass tray rotation for even cooking.

If your microwave has poor heating or uneven cooking, the circulating fan motor may have failed. This motor drives airflow for proper temperature distribution.

This replacement reflector restores proper light/heat direction and helps protect the internal lamp area from damage. It installs in the appliance's interior to improve illumination and component coverage. What it does:

• Directs light or heat toward the intended area for consistent performance
• Protects the lamp/sensor area from direct contact and debris
• Replaces cracked, warped or missing reflectors that cause uneven lighting
• Helps eliminate rattling or loose-fit issues when the original reflector is damaged

• Disconnect power before starting any repair to avoid shock or injury
• Handle the reflector carefully to avoid scratches or bending that reduce effectiveness
• Use the same mounting hardware and fasteners removed during disassembly; do not overtighten

Halogen bulb that illuminates the cavity or cooktop below your microwave. Replace when dim, flickering, or burned out. Confirm fit with model number.

Oven not heating properly or taking too long to reach temperature? This halogen heating element restores concentrated heat for normal baking and roasting.

Replace a faulty miraclon heater causing uneven heating or no heat in your microwave. This heating element ensures proper cooking performance.

Microwave won't start or runs with door open? This interlock door switch is a common fix. DIY repair in under 30 minutes with a torx bit.

If your microwave door won't latch or close securely, this holder assembly locks the door mechanism in place. Moderate difficulty repair in 30-45 minutes.

Microwave won't start or runs with door open? Failed door switch prevents safe operation. Simple DIY fix with basic tools in under 30 minutes.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

This wiring harness routes power and signals between appliance components to restore reliable electrical connections and control. It replaces a damaged or worn harness to help resolve intermittent operation and loss of function. What it does

• Provides sealed connector-to-connector wiring for power and control circuits.
• Restores electrical continuity to components that won't power on or respond.
• Helps eliminate intermittent connections, arcing, or burned wiring symptoms.
• Supports correct signal routing to prevent control errors and component failure.

• Disconnect power before servicing; follow all safety guidelines.
• Match connectors and routing to the original harness; do not force connectors.
• Inspect surrounding insulation and mounting clips; replace damaged retainers.

Microwave not heating or overheating? This thermostat regulates internal temperature by controlling the cooling circuit to maintain safe operating levels.

Microwave won't heat or makes loud buzzing noise? The diode regulates magnetron current flow. Simple repair—test with multimeter for continuity.

Mounting bracket for microwaves. Secures the unit to cabinetry or wall. Replace if bent, cracked, or missing to ensure proper installation support.

This reflector assembly restores proper reflection inside the appliance, helping redirect light/airflow as intended for consistent performance. Replace a cracked, dented, or missing reflector to reduce glare, rattling, or uneven operation. What it does

• Directs reflected light and airflow within the appliance to maintain designed performance.
• Helps prevent hot/cold spots or uneven airflow caused by a damaged reflector.
• Stops loose or broken reflector pieces from rattling during operation.
• Restores proper fit and alignment when the original reflector is bent, cracked, or missing.

• Disconnect power (unplug or switch off circuit breaker) before starting any repair.
• Handle carefully; edges may be sharp—wear gloves and eye protection.
• Remove panels and fasteners as shown; retain original screws for reinstall.

Replace a sheath heater when your wall oven won't heat properly or heats unevenly. This heating element is a moderate repair taking 30-60 minutes.

This AC fan motor powers the appliance's cooling fan to move air across coils for proper heat exchange and temperature control. Designed as a direct replacement to restore normal airflow and cooling performance. What it does:

• Spins the cabinet/condensing/evaporator fan to circulate air for heat exchange
• Restores airflow if fan is noisy, intermittent, or not running
• Helps prevent overheating by maintaining proper condenser/evaporator ventilation
• Reduces cycling issues caused by poor air movement

• Disconnect power before servicing to avoid shock or injury
• Handle the motor and fan blades carefully to prevent damage to wiring and connectors
• Verify mounting orientation and connector fit before securing the motor

Microwave not cooling properly or making unusual noise? This fan blade circulates air for heat dissipation and even cooking. DIY-friendly repair.

This plate guide is the rotating support that centers and stabilizes the microwave's glass tray for smooth, even rotation during cooking. It restores proper turntable movement and helps prevent wobbling or scraping. What it does:

• Supports and centers the glass turntable so it rotates evenly
• Keeps the tray aligned with the drive coupling to prevent slipping
• Reduces wobble and noise caused by a worn or broken guide
• Can resolve symptoms like an off-center, wobbly, noisy, or non-rotating turntable

• One plate guide

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove the glass tray and roller ring to access and replace the guide
• Handle glass parts carefully to avoid chips or cuts; reinstall components in proper order
• No special tools typically required; test rotation after reassembly

Replace your cracked or missing microwave interior metal tray shelf. Provides stable support for food and containers while containing spills.