Need Help?
Call
The timer knob skirt is the decorative ring around your dryer's timer control. Replace if cracked, broken, or stripped, preventing proper cycle selection.
I research it online and found that my timer knob skirt was cracked, watched the video online to see how to fix it, ordered the part………it came within 2.5 days. I followed the instruction on the video and was able to fix it myself. I love that I am able to fix things like this myself, I will use this site again for my next repair needs. Thank you Read more
This is a D-shaped knob insert or spring clip that fits inside a control knob and connects it to the control shaft on the dryer's front panel. It ensures the knob grips the shaft properly so you can turn the timer or selector. Replace this insert if your control knob spins freely without engaging the shaft or if the knob feels loose and won't stay in position.
I purchased the lid latch assembly and the lid switch strike. Following the clear video instructions for each part, my handy teenage son was able to remove the lid latch assembly and replace it with the new part as well as the lid switch strike. The washer is back to working perfectly for under $100. Appliance Parts Pros carry the parts to repair and at a lower cost than other online retailers. I saved about $30 compared to the other online site and I saved a service call fee. I'm so glad I... Read more
Control knob assembly for gas cooktop burners. Installs on front control panel. Replace if cracked, broken, spins freely, or won't grip valve stem.
I used a little too much 'elbow grease' trying to remove the knobs on my GE Stove trying to clean them. I thought they were metal, but they are plastic and I cracked the inside part on 3 of them. I am so happy Appliance Parts Pros sells these knobs for half the price of GE Parts! I did not realize how expensive they are. Ordering was easy and they were delivered in 2 business days! Read more
Timer knob assembly for dryers. Installs on the control panel to operate the timer dial. Replace if cracked, broken, stripped, or won't grip the shaft.
Remove and replace Read more
The Control Knob is an OEM part for GE dryers. It attaches to the front panel and allows users to set and control various dryer functions such as temperature, timing, and drying modes. This knob provides a simple interface for user interaction, ensuring ease of use and accessibility.
Symptoms of a bad Control Knob include:
Causes of control knob failure typically include physical damage from impacts, degradation from overuse, or environmental factors that can weaken the plastic, such as excessive heat or humidity.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I would remove the knobs from the other switches to replace the timer one when it would break until all the knobs were broken. My wife kept blaming me for being a brute but i swear i was gentle when turning the knob. i ordered all new ones and guess what...the new knobs are reinforced with a metal ring to keep the plastic from splitting. guess it wasn't shear brute strength after all and just a inferior part.. Read more
Control knob for ranges and ovens. Mounts on the front control panel to adjust burner temperature and settings. Replace if cracked, broken, or worn.
Replacement knobs ordered and came in 2 days. Read more
Replacement control knob for gas range burner adjustment. Needed when original knob is broken, cracked, melted, worn loose, or missing from the control panel.
Just pushed it on there Read more
The Burner Knob is an OEM replacement part for GE ranges. It serves as the primary control for adjusting the heat output of individual burners.
Causes of a faulty burner knob can include wear over time, physical damage, or issues with the internal valve or wiring connections.
Symptoms of a need to replace the burner knob:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
So, after looking for replacement parts, I found these. I was delighted. My original knobs were plastic with a silver finish. They had blistered from the heat of the stove over the years. The replacement knobs were all metal. Price was right. Very happy. Read more
Replacement control knob for gas range burners. Installs on the control panel to operate burner settings. Needed when original knob is cracked, broken, or worn.
Replaced knob. Read more
Replacement start button for dryer control panel. Installs on front console. Needed when original button is cracked, broken, or won't depress properly.
The start button broke?!? I ordered another start button and it looked exactly like the one I had. I figured it would break as well, so I might as well try to fix the broken one. I unplugged the power, removed the back of the dryer console, disconnected the start switch from the button and the dryer, depressed the 3 pop out tabs to remove the button from the dryer. I put the switch back in place and reinstalled the back. I clipped off the 3 projections that kept the button from being... Read more
Control knob for gas range burners and oven settings. Installs on the front control panel. Replace if cracked, broken, worn, or missing for control.
Removed old nob and replaced with new one. Read more
This control knob attaches to the cycle selector or timer shaft on your dryer's control panel and allows you to choose drying cycles and settings. It is typically made of plastic and snaps or pushes onto the control shaft. Replace this knob if it is cracked, broken, or no longer grips the shaft properly, making it difficult to select or start a drying cycle.
We order the part to you. Read more
Replacement control knob for cooktop burners. Installs on control panel stem. Replace worn, cracked, broken, or missing knobs for proper appearance.
Contacted you they correctly identified right part needed. Item was received within 48 hours of ordering. Very pleased with service and delivery time. Read more
The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.
Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time.
Symptoms of a bad knob assembly include:
This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
New timer Read more
Replacement timer knob assembly for washers. Installs on the control panel timer shaft. Needed when original knob is cracked, broken, or missing.
Easily replaced the knobs Read more
The Humidity Control is an OEM part for GE refrigerators. This component regulates the humidity levels within the crisper drawers, ensuring optimal conditions for preserving the freshness and longevity of fruits and vegetables. By controlling the humidity, it helps to prevent produce from drying out or becoming too moist.
Causes of a bad humidity control can include mechanical failure, damage from spills or impacts, and wear and tear over time. Additionally, issues with the connecting cables or electronic controls can also lead to malfunction.
Symptoms of a bad humidity control include:
Replaced two drawers, one shelf front, and the grille base Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.