Parts for Lg LSWD307ST/00: Lower Cavity Parts

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Replacement washer that secures fasteners and distributes load at connection points in ranges and ovens. Needed when original is missing, worn, or damaged.

Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.

Mounting screw for range bake element assembly. Secures heating element to oven cavity. Replace if screw is stripped, missing, or corroded during repair.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement mounting nut for cooktops and ranges. Secures components during installation. Order a new nut if yours is stripped, missing, or damaged.

Fix a broken or unresponsive control dial on your wall oven with this circuit board assembly. Restores precise temperature control and oven functions.

Fixes dishwasher display not lighting up or buttons not responding. This control board assembly manages cycle selection and status indicators.

Fix a range that won't heat, cycle on, or respond to buttons. This control board assembly interprets inputs and restores reliable oven operation.

Fix an unresponsive oven control knob or broken control dial. This encoder board detects knob position and sends signals to adjust temperature settings.

Oven won't heat, turns off randomly, or completely dead? This power control board manages heating elements and oven functions. Moderate difficulty repair.

This single wiring harness connects electrical components to restore power and signal paths in your appliance. It replaces a damaged or worn harness to help appliances operate reliably and safely. What it does:

• Routes power and signal between controls, sensors, and motors
• Replaces frayed, burned, or broken wiring that causes intermittent power or failures
• Helps stop shorts, erratic behavior, or components that won't receive power
• Matches OEM connector ends and wire colors for a direct replacement when the OEM part is specified

• Disconnect power and unplug the appliance before starting any repair
• Compare the harness to the original before installing
• Secure routing to avoid pinching, chafing, or contact with hot surfaces

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Replaces the damaged or worn outer panel surrounding your wall oven door. Restores appearance and protects internal components from debris and impact.

Replace a damaged or missing inner cover panel that exposes internal wiring or components. This panel restores interior appearance and protection. Moderate DIY.

Inner cover panel for wall ovens. Replaces cracked, damaged, or missing interior covers. Installs inside the oven cavity to restore appearance and protect.

Structural support component that installs inside your wall oven cavity. Replace this supporter if it's bent, cracked, broken, or missing to restore stability.

Mounting bracket for wall ovens. Secures oven to cabinet cutout. Replace if bracket is bent, cracked, or missing to ensure safe oven installation.

Fix a loose or wobbly temperature control knob with this wall oven shaft supporter. Connects the knob to internal temperature mechanisms for precise heat adjustments. Simple DIY fix.

Plastic supporter stem that fits between the control knob and encoder board on your range. Replace if broken, cracked, or jamming the control switch.

Wire harness for ranges and wall ovens. Connects electrical components within the appliance. Replace if wires are damaged, frayed, or connectors are broken.

Fixes intermittent power or control issues caused by damaged wiring. This harness restores electrical connections between range components for reliable operation.

Range controls not responding or features intermittent? This wiring harness restores power and signal connections between components for reliable operation.

If your range control panel is loose or cooking functions are erratic, the PCB supporter may be cracked. This mounting bracket secures the circuit board.

Fix a blank or unreadable oven display with this display module. Restores time, temperature, and cycle information to your control panel readout.

Fix an oven door that won't stay open or slams shut with this range door spring. Simple DIY repair requiring only a Phillips screwdriver, 30 minutes.

Fix a wall oven door that won't stay open or closes too quickly with this replacement door spring. Restores proper tension for smooth door operation.

Control panel mounting bracket for wall ovens and ranges. Secures the control panel to the front frame. Replace if bent, cracked, or damaged during repair.

Control knob assembly for wall ovens. Replaces broken, cracked, or missing knobs that no longer grip properly or have sheared shafts. Restores tactile control.

Decorative control panel trim for electric wall ovens. Replaces scratched, discolored, or damaged trim pieces. Restores the finished appearance.

Circular lug that connects stripped wires to threaded terminals in microwaves. Replace if cracked, corroded, or missing to restore secure connections.

Replacement oven rack that slides into side supports for level cooking space. Needed when your current rack is warped, bent, or damaged from heavy use.

Oven not heating or cooking unevenly? This heating element generates the heat needed to cook food. Common fix for temperature issues in electric ovens.

Mounting bracket secures your wall oven to the cabinet cutout. Replace if bracket is bent, cracked, or missing to ensure proper installation support.

Metal drip tray installs inside your wall oven to support cookware and catch spills. Replace if cracked, warped, rusted, or missing for a clean cavity.

Wall oven stopped moving or cycling intermittently? This AC synchronous motor assembly restores precise rotation and timing. Moderate DIY repair.

Catches drips, crumbs and grease during cooking to protect your oven floor and simplify cleanup. Replace if warped, rusted or missing. Confirm fit with your model.

This replacement part is a slide rack that has been manufactured by LG and is compatible with wall ovens. The slide rack is an internal component of the oven that provides a stable, heat-safe surface on which to balance cookware and place food inside the oven. Over time, this part could become bent, dented, warped, corroded, lost, or broken, requiring replacement. No tools are required to replace this part. Simply slide out the old rack and slide the new one into place. Ensure that oven is completely cooled down before attempting this to prevent serious burn injuries. This is a genuine OEM part that has been sourced directly from the manufacturer. This is an authentic part made of high-quality, durable, non-corrosive metal and is compatible with different wall ovens manufactured by LG and other brands. This part is only sold individually.

Top cover panel for electric wall ovens and ranges. Replaces cracked, damaged, or discolored covers. Cosmetic part that restores appearance.

Replace your wall oven's cracked or damaged top cover panel. This cosmetic part installs on the exterior top surface to restore appearance and finish.

Replace a cracked, damaged, or missing top cover panel for your wall oven. This decorative trim piece installs on the top exterior surface.

Replaces the top cover panel on your wall oven. Needed when the original panel is cracked, damaged, or missing. Restores the finished appearance.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

This single wire harness routes power and signals between components to restore proper electrical connections and enable normal operation. It replaces a damaged or frayed harness to fix intermittent power, failed controls, or non-starting issues. What it does:

• Transfers electrical power and control signals between modules and components
• Replaces broken, burned, or corroded wiring that can cause intermittent operation
• Helps address symptoms such as control errors, unresponsive buttons, or units that won't start
• Restores secure connector fit to prevent voltage drops and arcing

• Disconnect all power (unplug or shut off breaker) before service to avoid shock
• Compare connector count and pin layout to the original before installing
• Route harness away from heat sources and moving parts; secure with existing clips

Fix F9 error code or oven not heating issues. This thermal safety thermostat monitors temperature to prevent overheating. DIY repair in 15-60 minutes.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Replace a broken or damaged motor bracket causing loose or misaligned oven fan motor. Straightforward repair that restores proper motor mounting and support.

Fix inaccurate oven temperatures with this range temperature sensor. Restores proper heating cycles when your oven runs too hot or cold.

Fix range control panel display issues or power failures with this DC power jack. Restores electrical connection to control board. Moderate DIY repair.

Microwave overheating or shutting off unexpectedly? This safety thermostat monitors temperature and cuts power when overheating occurs. Simple repair.

Oven not cooling properly or overheating? This fan assembly restores airflow and temperature control. Includes motor and blade for complete repair.

Fix loose or misaligned range components with this retaining ring. Secures parts in place to prevent excess movement and wear. Simple installation.

If your oven won't heat evenly or runs too hot, this convection fan motor restores proper airflow and temperature control. Direct-fit replacement.

Fixes loud vibration or grinding noise from oven vent fan. This blower motor housing realigns the cooling fan motor and wheel to restore proper airflow.

This insulator cushions and isolates appliance components to reduce vibration, prevent metal-to-metal contact, and protect parts from wear. It helps stop rattling and keeps mounted components seated properly. What it does:

• Cushions mounted components to reduce vibration and noise
• Provides a non-conductive barrier to help prevent unwanted contact
• Helps maintain proper alignment of panels or assemblies
• Can prevent wear where parts would otherwise rub or chafe

• Disconnect power to the appliance before starting any repair
• Typically installs with simple push-fit or screw mounting; keep existing fasteners if re-using

Fixes power connection issues or arcing at the terminal block. This socket connects your range power cord to internal wiring. Moderate DIY repair.

Door hinge bracket for wall ovens. Secures and supports the door hinge mechanism. Replace if bracket is cracked, bent, or broken causing door misalignment.

Oven not heating or baking unevenly? A failed bake element is the most common cause. This part provides the primary heat source for baking and roasting.

If your wall oven isn't heating properly or has exposed wiring near the element, this heating element shield protects components from direct heat damage.

Replace your worn range oven door gasket to restore proper heat sealing and improve cooking efficiency. Verify fit with your model number before ordering.

Packing gasket creates a secure seal to prevent leaks and air loss in your oven. Replace if worn, cracked, or damaged to restore proper function. Verify fit.

Replace your wall oven's vent assembly if it's cracked, damaged, or missing. This assembly installs at the top or rear to ensure proper ventilation.

Fix poor ventilation or overheating in your wall oven with this air outlet vent. Restores proper airflow and exhaust function. DIY-friendly repair.

Replace your burned-out microwave cooktop light to restore bright illumination under your over-the-range unit. Confirm fit by model number before ordering.

Replace your oven's halogen light bulb to restore bright interior lighting. Essential when the bulb burns out or dims. Verify fit with your model number.

Replace your oven's halogen light bulb to restore bright interior lighting. Essential when the bulb burns out or dims. Verify fit with your model number.

Fix an oven with no display or unresponsive controls by replacing the power transformer. Restores proper voltage to control circuitry for reliable operation.

Accessory assembly for electric and gas ranges and wall ovens. Replaces damaged, broken, or missing accessory components. Restores proper fit and function.