Parts for Ge ZBD1850N02II: Motor-Pump Mechanism Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Guide casing for dishwasher conduit connection. Replaces cracked, stripped, or broken guide housing. Secures conduit threads inside unit.

Dishwasher ring nut with gasket creates a watertight seal around pump fittings. Replace if leaking, cracked, or gasket is damaged. Verify fit by model.

Connects spray arms to the water inlet valve in your dishwasher. Replace if cracked, broken, or leaking to restore proper water distribution.

Captures fine food particles in the dishwasher sump to keep wash water clean. Replace when clogged or torn to restore performance. Confirm fit with your model.

Secures the sump seal and housing to prevent leaks in your dishwasher. Replace if corroded or loose. Twists to lock in place. Verify fit with model.

Seals the sump to the tub to prevent leaks in your dishwasher. Replace when worn or flattened to stop water leaks and maintain wash performance.

Dishwasher leaking or not draining? This sump assembly houses the pump and routes wash water. Replaces a cracked or leaking sump to restore circulation.

Connector hose for dishwasher vent duct assembly. Replaces cracked, split, or deteriorated hoses that cause moisture leaks or air flow issues.

Replaces the hose and clamps connecting the pump to internal plumbing. Install when the original hose is cracked, split, or clamps are corroded or loose.

Secures dishwasher components in place. Replace this mounting plate if yours is cracked, broken, warped, or missing to properly support internal parts.

Star washer for dishwasher assembly. Secures components and provides spring tension. Replace if damaged, corroded, or missing during repairs.

Insulating sleeve for dishwashers. Installs around components to provide heat protection and reduce noise. Replace if cracked, worn, or missing.

Fixes dishes not drying properly or coming out wet. This heating element restores drying heat in your dishwasher. Moderate DIY repair.

Rubber hose that routes air from the tub to the pressure switch. Replace when cracked, split, blocked, or leaking to restore proper water level detection.

If your dishwasher overfills, underfills, or won't start a cycle, the water level pressure switch may have failed. Moderately easy DIY repair.

Fix dishwasher water leaks or no water flow issues with this water inlet valve. Controls water fill during wash cycles. DIY-friendly replacement.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

This replacement screw secures panels and components on compatible GE appliances, restoring proper fastening to prevent loose parts and rattling. It's a simple hardware fix that helps maintain safe, quiet operation. What it does:

• Fastens and secures panels, brackets, or internal components
• Replaces missing or stripped screws to stop rattling and reduce vibration
• Helps maintain alignment of removable covers and service panels
• Used wherever the OEM specifies this exact screw for a secure fit

• Disconnect power and water before servicing the appliance
• Use the correct size screwdriver or driver bit to avoid stripping the head
• Tighten snugly but do not overtighten; overtightening can strip threads or damage parts
• Keep removed hardware organized before final reassembly

Delivers water from inlet valve to dishwasher tub. Replace if cracked, split, leaking, or worn to prevent water damage and restore proper filling.

A squeeze-style clamp that secures wiring or small hoses to the appliance frame, helping prevent chafing and movement. Compact and simple, it restores proper routing and keeps components stable for reliable operation. What it does:

• Holds wiring harnesses or small hoses in place to prevent rubbing and wear
• Keeps wires and tubes routed away from heat or moving parts
• Reduces electrical and mechanical stress caused by loose routing
• Helps stop intermittent failures caused by chafed or pinched lines

• Disconnect power (and water if applicable) before servicing the appliance
• Remove the damaged clamp and position the new clamp over the wire or hose and frame tab
• Squeeze closed with appropriate pliers until secure; avoid over-crimping which may damage wiring
• Replace any damaged wiring or hoses discovered during installation

Dishwasher fill funnel that directs water into the tub during the fill cycle. Replace if cracked, broken, or missing to restore proper water flow.

Dishwasher O-ring seal prevents leaks in pump and valve assemblies. Replace when worn, cracked, or causing water leaks. Verify fit with your model number.

Secures dishwasher tub and hose connections to prevent leaks and movement. Replace if connections are loose or leaking. Confirm fit with your model number.

Secures the lower manifold assembly in your dishwasher, keeping water valve components aligned. Replace if bracket is cracked, broken, or missing.

Secures threaded water connections inside your dishwasher. Replace this ring nut if cracked, stripped, or missing to restore a tight, leak-resistant fit.

Replacement spray arm nozzle that directs wash water in a focused spray pattern. Install when the original nozzle is clogged, cracked, or leaking.

Dishwasher motor support bracket that secures the wash motor assembly to the base. Replace if cracked, broken, or missing to properly mount the motor.

This small rubber cushion provides a soft stopping surface to reduce noise, vibration and wear where moving parts contact the cabinet or tub. It helps keep components aligned and running quietly for longer. What it does

• Acts as a bumper between moving parts and the cabinet to reduce rattling and impact noise
• Dampens vibration to prevent premature wear on adjacent parts
• Helps maintain proper spacing and alignment for doors, panels or internal assemblies
• Commonly used where a soft, durable contact point is required

• One cushion as shown

• Disconnect power to the appliance before inspecting or replacing the cushion
• Typically installs by pressing into a slot or onto a mounting post; check exact position before removal
• Replace any worn or torn cushions to restore quiet operation and prevent damage

Replace your dishwasher's pump hose if cracked, leaking, or damaged. This hose connects the pump to the spray arm system. Essential for proper water flow.

Routes wastewater from the dishwasher sump to the drain pump. Replace this hose if cracked, worn, or leaking to restore proper drainage flow.

Fix a dishwasher that won't heat or stops mid-cycle with this thermostat and support assembly. Protects against overheating and regulates temperature.

Secures dishwasher hoses to prevent leaks and water damage. Replace if loose, cracked, or corroded to maintain proper seal. Verify fit with your model.

Secure dishwasher hoses and prevent leaks with this hose clamp. Replace if worn, cracked, or causing water leakage. Verify fit with your model number.

Seals the spray arm hub to prevent leaks and maintain proper rotation. Replace if worn or cracked to keep water inside the tub. Confirm fit with your model.

This wire tie secures and organizes wiring inside the appliance to help prevent chafing and loose connections. Its 7-7/8 inch length is suited for bundling harnesses and routing cables away from heat and moving parts. What it does:

• Fastens and groups wires or small hoses to keep them neatly routed
• Helps prevent wire chafing, abrasion, and contact with sharp edges
• Reduces the chance of intermittent connections from loose wiring
• Keeps wiring away from moving components to reduce noise and wear

• Disconnect power before servicing the appliance
• Position wiring as needed, insert tie and tighten; avoid over-tightening
• Trim excess tie length flush and secure cut end away from wires
• Replace any damaged wiring insulation and verify routing before restoring power

Secure dishwasher hoses and tubes with this squeeze clamp. Replace if worn, cracked, or causing leaks. Verify fit with your model number before ordering.

Secure dishwasher hoses and components with this squeeze clamp. Replace if damaged, cracked, or causing leaks. Verify fit with your model number.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.