Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
Mounting screw for washer assembly. Secures internal components and panels. Replace if screw is stripped, missing, or no longer holding parts firmly.
Replacement spring secures door bellow to front panel on front-load washers. Replace if rusted, stretched, broken, or missing to restore proper seal fit.
Washer door boot seal prevents water leaks between the tub and door. Replace if torn, cracked, or leaking during cycles. Verify fit with your model number.
Usually ships within 4 - 14 days
Suspension spring that supports and stabilizes the washer tub assembly. Replace if spring is broken, stretched, detached, or causing excessive vibration.
Replacement outer shell housing for washers. Restores the appliance's exterior when the original is cracked, damaged, or missing. Secures internal parts.
Replacement suspension spring for washer tub assemblies. Installs to dampen vibrations and absorb movement. Order if your spring is broken, worn, or missing.
Hex washer head screw secures panels, brackets, and drum assemblies in washers. Replace rusted, stripped, or missing screws to prevent rattling.
Replace a damaged or worn washer drum assembly causing loud banging noises, uneven spinning, or clothes snagging. Restores smooth rotation and load movement.
Plastic baffle (vane) that attaches inside the washer drum to lift and tumble clothes during wash cycles. Replace if cracked, broken, or detached.
If your washer won't start, agitate, or spin, the drive motor may have failed. This motor powers both wash and spin cycles. Test windings with a multimeter.
Secures the motor housing to its mounting bracket in washers and laundry centers. Replace if screw is missing, stripped, or damaged during service.
Seals your washer door to prevent leaks and maintain proper closure. Replace if you notice water leaking, tears, or mold buildup. Verify fit with your model.
Outer housing shell that covers and protects your washer's internal components. Replace if cracked, damaged, or worn to restore appearance and shield wiring.
Washer not spinning or draining properly? A worn drive belt often causes poor spin performance. This belt connects motor to drum. 30-minute DIY repair.
Fix a washer that won't spin or makes grinding noises with this drive pulley assembly. Powers the belt system for proper drum rotation and agitation.
Fix washer vibration or loose drum sounds with this internal mounting bolt. Secures tub, transmission, and agitator components. Standard DIY repair.
Shock absorber for front-load washers. Reduces vibration and absorbs movement during cycles. Replace if worn, damaged, or causing excessive shaking.
Replacement shock absorber for front-load washers. Mounts between drum and base to dampen vibration. Replace if cracked, leaking, or worn out.
Secures the shock absorber to the outer tub in your washer. Replace if the pin is broken, cracked, or missing to restore proper shock mounting.
Mounting bracket secures components inside your laundry center. Replace if bent, broken, or missing to eliminate rattling and restore stability.
Washer won't drain or leaves clothes soaking wet? A faulty drain pump prevents water removal after wash cycles. Direct-fit replacement, moderate DIY.
Washer leaking or not filling? This water valve diaphragm forms a watertight seal to control flow and prevent leaks. Simple repair restores proper operation.
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
Fix uneven temperatures with this washer air chamber duct. Channels cold air throughout the cabinet for consistent cooling. Easy DIY repair part.
Washer hose clamp secures water inlet and drain hoses to prevent leaks. Replace if loose, cracked, or causing water drips. Verify fit with your model number.
Secures interior trim and components in your laundry center to prevent rattling and shifting. Replace when worn or broken to restore a snug fit. Verify compatibility with your model number.
Secures hoses and boots to pumps and tubs, preventing leaks. Replace if damaged, rusted, or unable to tighten. Confirm fit with your model number.
Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.
Tub ring that secures and seals between the outer tub and basket assembly. Replace if cracked, broken, or worn to restore proper tub alignment.
Drain hose that carries water from the washer tub to your drain during cycles. Replace if cracked, split, leaking, or damaged to prevent water spillage.
Cable tie secures wiring bundles and hoses inside your laundry center. Prevents loose routing, rubbing, and rattling noises. Replace if broken or missing.
Replacement mounting bracket that secures washer panels and components. Needed when original bracket is cracked, broken, or missing, causing loose or misaligned parts.
10-inch heating element for washers. Mounts on the back of the outer tub assembly under the spinner. Replace if cracked, burned out, or corroded.
Support clip that secures the heating element in place inside your washer drum. Replace if broken, cracked, or missing to properly hold the element.
Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.
Sound dampening insulation that reduces vibration and noise in your washer. Replace if worn, torn, or missing to restore quiet operation and protect components.
Cushion bumper for washer installation. Absorbs vibration and protects cabinet surfaces. Replace if cracked, compressed, or missing to restore proper support.
Replaces missing, stripped, or rusted 8-18 thread screws that secure dryer panels, brackets, and components for tight, rattle-free assembly.