Kenmore Dishwasher 665.13859K601 (66513859K601, 665 13859K601) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348409
This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.
- Provides threaded fastening for panels, brackets, covers, or internal components
- Replaces worn, rusted, stripped, or missing hardware
- Helps reduce vibration and rattling from loose parts
- Restores proper alignment and a secure fit of attached parts
What's included: Includes 1 screw. Installation notes:
- Disconnect power; turn off water supply before service
- Note original screw location and retain any spacers or clips for reassembly
- Start threads by hand to avoid cross-threading
- Tighten snugly; do not overtighten to prevent stripping
Do-It-Yourself Stories from Customers like You
Dishwasher would not start Mark M. • Midlothian , VA • July 16, 2016
Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232
Quantity of ONE.
Size: 8-18 x 5/8 inch.
(#8 screw, 18 threads per inch, 5/8 inch long)
Do-It-Yourself Stories from Customers like You
Leaking around dishwasher door previous repair missing parts Patrick R. • Peachtree City , GA • November 15, 2014
I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676455
Color: Grey. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For white use WP676453. For tips use 676458.
Do-It-Yourself Stories from Customers like You
Rusty tips on tops of posts in top and bottom racks of kitchen aid dishwasher James O. • Bedford , OH • July 04, 2016
Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure.
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10358302
Goes from pump to exterior drain hose.
Do-It-Yourself Stories from Customers like You
Dishwashwer was only partially draining James M. • Barre , MA • November 07, 2016
I figured out that it was probably a plugged pump hose, since the pump would run, it somtimes it drained and sometimes it didn't. Your video helped with how to take the dishwasher out and replace the hose. I replaced the hose and everything is now working fine. It turned out to be a broken check valve in the old hose that caused the problem. It took 90 mins to do the repair.
Read more
More
$52.95
- Compare At:
-
$62.48
- You Save:
-
$9.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268909
Overfill control.
Do-It-Yourself Stories from Customers like You
Washer would not fill with water Ty J. • Hillsboro , OR • July 08, 2018
Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem.
Read more
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676453
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Do-It-Yourself Stories from Customers like You
Tines on my dishwasher rack was rusting rust was showing on my dishes Jean M. • Lenoir , NC • January 10, 2015
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines.
Read more
More
$30.95
- Compare At:
-
$37.14
- You Save:
-
$6.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11631670
This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.
- Fastens sheet metal, brackets, or plastic parts as designed by the manufacturer
- Helps maintain alignment and reduce vibration/rattling
- Direct replacement for stripped, corroded, or missing screws
- Common signs: loose panels or trim, shifting components, screw won't tighten
What's included: One screw Install notes:
- Disconnect power; shut off water or gas supply if applicable
- Use the correct driver to avoid stripping the head
- Start threads by hand to prevent cross-threading; tighten snugly without overtightening
- Replace one-for-one in the original location per service information
Do-It-Yourself Stories from Customers like You
Some accessories were worn. Wayne C. • Massapeqau Park , NY • April 15, 2020
My son fixed the issue of some wear and tear.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281156
This replacement screw fastens appliance components such as panels, brackets, or trim. Use it to replace a missing, stripped, or rusty fastener and restore a secure, rattle-free fit in your appliance assemblies.
- Secures panels, brackets, or hardware to maintain proper alignment
- Helps eliminate vibration, rattling, or loose-feeling parts
- Replaces fasteners that are missing, corroded, or cross-threaded
- Typical signs you need it: loose handle or panel, gaps, or hardware that won't stay tight
What's included: One screw. Install notes:
- Disconnect power (and shut off gas, if applicable) before servicing
- Match thread type and length to the original fastener for proper fit
- Start threads by hand to avoid cross-threading; do not overtighten
- Reuse any original washers or clips if present
Do-It-Yourself Stories from Customers like You
Screw on one of the roller on upper tray broke Tim J. • Bend , OR • December 28, 2014
Replaced complete roller- screw,wheel and axel. Easy job
Just recently I had to replace upper spray arm. I ordered assembly from you and was completely satisfied with your service and price, that was over 1/2 of what local appliance repair dealer wanted. Very satified with how to do video on this project
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572618
Seal included. This sump housing assembly includes a 32.17 millimeter hole for the thermistor. If the hole for the thermistor is 31-31.5 millimeters you will need to order WP8534882.
Do-It-Yourself Stories from Customers like You
Leaking sump housing Allen G. • Elkhorn , NE • January 15, 2016
I noticed the floor around the dishwasher was starting to get wet and warp the wooden floor. The chopper had gotten out of line and had cut a pinhole into the sump housing and the dishwasher was leaking badly. It was quite easy to repair. Just unhook the drain hose and the wire connectors, twist off the turbidity sensor and waste motor, pull out the shims and the whole assemple comes up and out. The hardest part was pulling the motor off of the assembly, since I wasn't sure if I needed to...
Read more
More
$129.26
- Compare At:
-
$152.53
- You Save:
-
$23.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531857
This inlet protector is the coarse screen that covers the dishwasher's pump/sump inlet, blocking large debris from entering the wash system. Replacing a damaged or missing protector helps maintain water flow and protect the pump from jams or wear.
- Screens large food particles and debris from the pump/chopper inlet
- Helps maintain proper water circulation and consistent cleaning performance
- Reduces risk of pump damage or noisy operation from debris
- Common signs: cracked or missing screen, persistent debris in the sump, grinding/rumbling noises, or declining wash results
What's included: 1 inlet protector Install notes:
- Disconnect power and shut off water supply before servicing
- Remove the lower rack and spray arm; access the sump/accumulator area per your model
- Lift out the old protector; seat the new protector fully and secure any tabs/fasteners
- Reassemble and ensure the screen sits flat with no gaps
Do-It-Yourself Stories from Customers like You
Clogged at the chopper assembly strange noisehopper assembly broken Thomas H. • Idaho Falls , ID • July 07, 2015
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ...
Read more
More
$78.57
- Compare At:
-
$94.74
- You Save:
-
$16.17
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10477552
This heater terminal nut fastens the heating element's electrical connector to its stud, keeping the connection tight under heat and vibration. Replacing a worn or missing nut restores safe contact and consistent heating performance.
- Secures the wire/ring terminal to the heater stud for a solid electrical connection
- Helps prevent arcing, discoloration, and heat damage from a loose connection
- Signs include a loose terminal, burnt odor, or melted/charred insulation at the heater connection
What's included: 1 heater terminal nut
- Disconnect power and allow the appliance and element to cool completely before service
- Photograph wiring for reference; remove old hardware and clean the terminal
- Inspect the ring terminal, insulators, and stud; replace any heat-damaged components
- Start threads by hand to avoid cross-threading; snug with the correct nut driver—do not overtighten
Do-It-Yourself Stories from Customers like You
Stopped running after rinse cycle and the clean light was flashed 3 times Clyde Y. • Turtle Creek , PA • August 29, 2015
Replaced the heating element as shown in the video. Repaired a bad connector on the wire leading to the heating element. The clean light still flashed 3 times. Determined that the thermal fuse also needed to be replaced. Replaced the thermal fuse as shown in the video. The clean light now flashed 7 times which I discovered meant that the control panel needed to be reset. I then reset the control panel by pressing the buttons: normal, heated dry, normal, heated dry. It now works perfectly.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268895
This overfill float and shaft assembly monitors the dishwasher's water level. As the tub fills, the float rises and triggers the float switch to shut off the inlet water, helping prevent overfilling and leaks.
- Senses tub water level and moves up/down with the water
- Activates the float switch to stop filling at the correct level
- Helps protect against overfill-related leaks
- Common symptoms include: won't fill (float stuck up), continuous filling/overfilling (float stuck down or damaged), or float not moving freely
What's included: Float and shaft assembly. Install notes:
- Disconnect power and turn off the water supply before servicing
- Lift the old float straight up from inside the tub; access the underside (behind the toe panel) as needed to release the shaft from the float switch lever
- Install the new shaft through the guide and onto the switch lever; seat the float so it moves freely
- Verify smooth float movement and test a fill cycle while checking for leaks
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwasher kudp02frss2 leak at float switch at front right of unit Richard B. • Mahwah , NJ • December 02, 2016
Removed bottom cover, located leak at float switch, removed and replaced float switch kit.
The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the...
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268349
This hanger anchors the dishwasher's door-balance spring to the frame so the door opens and closes smoothly. Replacing a worn or broken hanger restores proper spring tension and helps prevent a door that drops, slams, or feels heavy.
- Secures the door balance spring to the dishwasher cabinet/frame
- Maintains correct spring tension for smooth, controlled door movement
- Helps fix a door that falls open quickly or won't stay in position
- Useful to replace when door balance hardware shows wear or damage
What's included: 1 hanger Install notes:
- Disconnect power and shut off water before servicing; remove the toe panel/kickplate
- Support the door and carefully relieve spring tension before removing parts
- Slide the dishwasher out if needed for side access; transfer the spring to the new hanger and reinstall
- Inspect the opposite-side spring/link and hinge for wear; verify door balance before reassembly
Do-It-Yourself Stories from Customers like You
Upper basket wheel hubs had broken away Mark F. • Tigard , OR • February 25, 2022
Found a great extensive list of available parts for our dishwasher model on the website. Reference to videos made the repair steps very clear and easy to follow.
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268713
Color: light gray. Measures about 3 inches high by 6 inches deep.
Do-It-Yourself Stories from Customers like You
Original dish track wheel assembly kept loosing a wheel as the holding tabs deteriorated over time Norbert C. • Elkton , MD • August 03, 2019
Part needed replacement
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193741
This upper rack adjuster sets and secures the dishwasher's top rack height so dishes clear the spray arms and load properly. When the adjuster wears or breaks, the rack can become uneven or stuck, leading to poor cleaning and loading issues.
- Provides the mechanism to raise/lower and lock the upper dishrack height
- Keeps the top rack level and secured to the rail during operation
- Common symptoms of failure: rack drops on one side, won't adjust, feels loose, or comes off the track
- Contribute to poor wash results when the rack can't be positioned correctly
What's included: 1 upper rack adjuster assembly Install notes:
- Disconnect power and water supply before servicing
- Remove upper rack end caps/stops and slide the rack out to access the adjuster
- Release or unfasten the old adjuster, transfer any reusable clips/wheels if applicable, and install the new adjuster
- Set both sides of the rack to the same height; reinstall rack and confirm smooth travel and secure locking
Do-It-Yourself Stories from Customers like You
There were two problems: one with upper wash arm the second the dish rack adjuster were worn out and needed replacing E. Joseph M. • Millbury , MA • February 05, 2016
Making use on online video on each repair item assisted greatly in getting things fixed quickly and efficiently.
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79